Rastergraf / Peritek PMA-P PMC-to-PCI Adapter Board
  • Rastergraf_Peritek_PMA_P_View1_2015316103656
  • Rastergraf_Peritek_PMA_P_View2_2015316103656
  • Rastergraf_Peritek_PMA_P_View3_2015316103656

Rastergraf / Peritek PMA-P PMC-to-PCI Adapter Board



This Rastergraf / Peritek PMA-P PMC-to-PCI Adapter Board is used and in excellent condition. This unit does not have a faceplate.

Configuration:
• Connectors: PMC

Part Numbers: PMC2PCI-X, AB5-00672-1100




Have a quote from somewhere else? Click Here
Stock # 84749-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Rastergraf / Peritek PMA-P PMC-to-PCI Adapter Board

Features
  • 32 and 64-Bit PCI Bus Compatibility
  • Test Points and Power LEDs
  • Optional VME P2 Connector
  • PCI/PMC JTAG Port Connector
  • Passive (Bridgeless) Design
  • Full 64-Bit Data Path to PMC Connectors

Description

The Rastergraf / Peritek PMA-P PMC-to-PCI Adapter Board is a single slot PMC-to-PCI adapter board. It enables any 32-bit or 64-bit PMC (PCI Mezzanine Card) module to be plugged into a standard PCI slot. It provides the full 64-bit interconnect between the PCI bus and the PMC connector set.

The PMA-P is designed to function as a transparent extension to the PCI bus. As such, it is a passive adapter board and has no PCI-to-PCI bridge. Thus, the carrier’s PCI bus is connected directly to the PMC card’s PCI bus. Because this results in long PCI traces, it is best not to use more than one PMA-P in a backplane segment, and it should be installed in the end slot of the backplane, farthest from the CPU. It is best to avoid use of the PMA-P in a 66 MHz PCI system. Please see the bridged version, PMB-P, for applications requiring use at 66 MHz.

To aid in debugging, the PMA-P has Test Point pins and LED indicators for BUSMODE1, +12V, -12V, +5V, +3.3V and VIO. It also has a connector for the JTAG port. PMC Index Pin holes are provided for both 3.3V and 5V PMC signaling pins so that the PMA-P can be configured for either bus environment. Jumpers can be installed to enable 66 MHz mode, and to set PCI PRSNT and PMC BUSMODE.

An optional VME P2-type connector can be included which “breaks out” the User I/O signals on the PMC Pn4 connector. The PMA-P provides optional local 3.3V generation because many PCI bus machines do not supply it.


Product Family: PMA-P, PMAP, PMA P


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Rastergraf / Peritek PMA-P PMC-to-PCI Adapter BoardRastergraf / Peritek PMA-P PMC-to-PCI Adapter BoardRastergraf / Peritek PMA-P PMC-to-PCI Adapter Board


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 84749-1 - Rastergraf / Peritek PMA-P PMC-to-PCI Adapter Board


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html