Curtiss-Wright / ACRA Control KAD/ADC/109/S1 8-Channel Full-Bridge A/D Converter
Features
- (8) Full or ½-Bridge, Potentiometer or Differential Ended (D/E) Input Channels
- 16-Bit Simultaneous Sampling on All Channels
- High Accuracy
- Programmable Excitation, Balance Current and Range per Channel
- 8th Order Butterworth Filter with Programmable Cutoff Frequency per Channel
Description
The Curtiss-Wright / ACRA Control KAD/ADC/109/S1 8-Channel Full-Bridge A/D Converter provides independent excitation for up to eight channels. Each channel has a separate programmable amplifier, programmable filter and A/D converter.
At the heart of the KAD/ADC/109/S1 is a hard-wired state-machine that over-samples all channels at a rate between 96ksps and 192ksps and digitally filters any noise above the user programmable cutoff frequency. This is achieved using cascaded, half-band, decimate by two, fifteen tap, finite-impulse-response (FIR) filters with 32-bit coefficients followed by an 8th order Butterworth IIR filter with a default cutoff point set at a quarter of the sampling frequency.
All signals are sampled simultaneously. Thus, when several channels are sampled at different sampling rates, at the start of an acquisition cycle all channels will be aligned.
Product Family: KAD/ADC/109/S1, KADADC109S1, KAD-ADC-109-S1
Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.