DynamicSignals / Signatec PDA14 2 Channel, 14-Bit Waveform Digitizer
  • Signatec_PDA14_View1_201571411265
  • Signatec_PDA14_View2_201571411265
  • Signatec_PDA14_View3_201571411265

DynamicSignals / Signatec PDA14 2 Channel, 14-Bit Waveform Digitizer



This Signatec PDA14 2 Channel, 14-Bit Waveform Digitizer is used and in excellent condition.

Part Number: PDA14




Have a quote from somewhere else? Click Here
Stock # 85685-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
DynamicSignals / Signatec PDA14 2 Channel, 14-Bit Waveform Digitizer

Features
  • (2) Channels at up to 100 MHz Sample Rate
  • 14-Bits of Resolution
  • Bandwidth from DC-50 MHz
  • 512 MB of On-Board Memory
  • 500 MB/s Transfer via Signatec Auxiliary Bus (SAB)
  • 266 MB/s Transfer (Peak) over PCI Bus

Description

The Signatec PDA14 2 Channel, 14-Bit Waveform Digitizer is a dual channel waveform capture board which provides a tremendous combination of high speed and high resolution along with an extremely large memory capacity. The entire 512 MB memory may be used as a giant FIFO for acquiring data directly to either the SAB or PCI bus. Tests have shown that a very large FIFO memory is required to prevent data loss when performing continuous data streaming over the PCI bus.

The PDA14 is a 64-bit PCI compatible board equipped with standard ‘Plug and Play’ features common in PCI systems. It is capable of Bus Master DMA data transfers at up to a peak of 266 megabytes/second and a sustained rate of 250 megabytes/second. It can also operate in 32-bit PCI slots in which case the transfer rate will be limited to about 125 megabytes per second.

The PDA14 incorporates the advanced Signatec Auxiliary Bus (SAB) that allows for data transfers of up to 500 megabytes/second. This allows for the high-speed transfer of data to fast processor boards, such as Signatec’s PMP8A, or other peripherals. The SAB also incorporates device control features for operating the PDA14 independent of the host bus.

The PDA14 is equipped with an interconnect port to allow multiple boards to be interconnected in a Master/Slave configuration. Up to three Slave boards may be operated with one Master. Master/Slave connections are via a ribbon cable that connects at the top of the board. In this configuration the clock and trigger signals from the Master drive the Slave boards so that data sampling on all boards occurs simultaneously.

The PDA14 has six software selectable signal amplitude ranges from a maximum of 3.0 volts down to 200 millivolts full scale.

External clock and trigger signals are provided via SMA connectors on the back bracket. Also provided is a user selectable digital output signal for synchronization purposes. Effectively, twenty-two internal clock frequencies may be selected, from 100 MHz down to 97.7 kHz in factors of 2 or from 62.5 MHz down 61.0 kHz in factors of 2. The PDA14 supports single shot, segmented, and pretrigger triggering modes.


Product Family: PDA14, PDA 14, PDA-14


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Signatec PDA14 2 Channel, 14-Bit Waveform DigitizerSignatec PDA14 2 Channel, 14-Bit Waveform DigitizerSignatec PDA14 2 Channel, 14-Bit Waveform Digitizer


Contact Us
Share:
Manuals, Datasheets, Drivers, Links

Signatec PDA14 Datasheet (pdf) 
Link to DynamicSignals / Signatec Website 


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 85685-1 - DynamicSignals / Signatec PDA14 2 Channel, 14-Bit Waveform Digitizer


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html