DynamicSignals / Kinetic Systems V525 VXIbus Development Module
  • DynamicSignals_Kinetic_Systems_VXI203A_View1_201511515585
  • DynamicSignals_Kinetic_Systems_VXI203A_View2_201511515585
  • DynamicSignals_Kinetic_Systems_VXI203A_View3_201511515585
  • DynamicSignals_Kinetic_Systems_VXI203A_View4_201511515585

DynamicSignals / Kinetic Systems V525 VXIbus Development Module

This Kinetic Systems V525 VXIbus Development Module is used and in excellent condition. This module does not include front connectors. Breadboard has been lightly used (few end-user components installed on breadboard).

Photos are representative of the components installed on the breadboards.
Top of Breadboard Photo
Bottom of Breadboard Photo

Have a quote from somewhere else? Click Here
Stock # 86621-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
DynamicSignals / Kinetic Systems V525 VXIbus Development Module

  • Single-Width VXI Module
  • VXI Register-Based Interface
  • Strap-Selectable Power and Ground Arrays
  • Provisions for Up to 3 Plug-In Development Cards


The Kinetic Systems V525 VXIbus Development Module is a single-width, C-size, VXIbus module that provides a prototyping and development platform consisting of a standard, VXI, register-based interface and an array of holes for circuit breadboarding. Power and ground are strap-selectable to points within the array of holes that allow for IC packages with 0.3" and 0.6" pin spacing as well as spacing for PGA sockets up to 17 pins per side. In addition, six 50-position, interboard connectors are provided on the host module which carry VXIbus address, data, control, power, and ground signals. These connectors allow the user to develop circuitry on up to three plugin submodule cards for reconfigurable or higher density applications.

The register-based VXI interface on the V525 provides the configuration registers required by the VXIbus specification so that the appropriate levels of system configuration can be accomplished. Access to the configuration registers is available through the VMEbus Short Address (A16) Space. The V525 supports both static and dynamic configuration. Additionally, circuitry is provided to interface to user-supplied operational registers positioned in VMEbus Standard Address (A24) Space.

Product Family: V525, V525-AA11, V525-AB11, V525-AAII, V525-ABII

Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.

Contact Us


Contact Us

Item Images

Click a thumbnail to view larger image:

DynamicSignals / Kinetic Systems V525 VXIbus Development ModuleDynamicSignals / Kinetic Systems V525 VXIbus Development ModuleDynamicSignals / Kinetic Systems V525 VXIbus Development Module
DynamicSignals / Kinetic Systems V525 VXIbus Development Module

Contact Us

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection

Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!

InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Item to Inspect: 86621-1 - DynamicSignals / Kinetic Systems V525 VXIbus Development Module

All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html