Abaco Systems / SBS PMC-AD16-ETB 32-Channels of Isolated 16-Bit A/D
  • GE_Fanuc_SBS_PMC_AD16_ETB_View1_20151216105026
  • GE_Fanuc_SBS_PMC_AD16_ETB_View2_20151216105026
  • GE_Fanuc_SBS_PMC_AD16_ETB_View3_20151216105026
  • GE_Fanuc_SBS_PMC_AD16_ETB_View4_20151216105026

Abaco Systems / SBS PMC-AD16-ETB 32-Channels of Isolated 16-Bit A/D

• I/O: P14

Part Number: 89010125

Have a quote from somewhere else? Click Here
Stock # 87128-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Abaco Systems / SBS PMC-AD16 32 Channels of Isolated 16-Bit A/D

  • ESD Protected Input Multiplexer
  • Programmable Gain Amplifier
  • 16 Bit A/D Converter with Internal S/H and Reference
  • Interrupt Capability at End-of-Conversion


The GE Fanuc / SBS PMC-AD16 32 Channels of Isolated 16-Bit A/D is a PCI Mezzanine Card (PMC) with galvanically isolated 32 multiplexed 16-bit ADC with on board DC/DC converters. The data acquisition and conversion time is mode-dependent: Maximum 12µs without channel / gain change, maximum 14.5µs with channel / gain change. The 32 ADC input channels can be software configured to operate in single-ended or differential mode with 16 input channels. The mixed mode is possible e.g. channel 1 to channel 8 selected as differential inputs and channel 9 to channel 16 and channel 25 to channel 32 as single-ended input channels.

The ADC multiplexer is overvoltage protected up to 70 Vpp. A programmable gain amplifier allows gains of 1, 2, 5, 10. The full-scale input voltage range is +/-10V. Additionally the PMC-AD16 provides a sequencer to control the analog inputs without wasting CPU time. Each channel can be independently enabled and configured by a sequencer instruction RAM. After the last instruction of a programmed sequence has completed the ADC data of all channels enabled for the sequence are stored in the data RAM. The repeat frequency of the sequencer can be programmed by using the sequence timer. The sequence timer is programmable from 100µs to 6.5535s in steps of 100µs. When the timer reaches the programmed value the sequencer starts a new sequence. A special function is the sequencer continuous mode. It is activated, if the sequence timer register is set to 0. In this mode the sequencer will start again with the first instruction of the sequence as soon as the last instruction of the previous sequence has been completed.

Product Family: PMC-AD16, PMC AD, PMC-AD16-ETB, PMC AD16 ETB

Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.

Contact Us


Contact Us

Item Images

Click a thumbnail to view larger image:

Abaco Systems / SBS PMC-AD16 32 Channels of Isolated 16-Bit A/DAbaco Systems / SBS PMC-AD16 32 Channels of Isolated 16-Bit A/DAbaco Systems / SBS PMC-AD16 32 Channels of Isolated 16-Bit A/D
Abaco Systems / SBS PMC-AD16 32 Channels of Isolated 16-Bit A/D

Contact Us
Manuals, Datasheets, Drivers, Links

GE Fanuc / SBS PMC-AD16 Datasheet (pdf) 
Link to Abaco Systems / SBS Website 

Contact Us

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection

Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!

InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Item to Inspect: 87128-1 - Abaco Systems / SBS PMC-AD16-ETB 32-Channels of Isolated 16-Bit A/D

All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html