DynamicSignals / Kinetic Systems V252-ZB11 16-Channel, 8-Pole Analog Filter
  • DynamicSignals_Kinetic_Systems_V252_ZB11_View1_201681115127
  • DynamicSignals_Kinetic_Systems_V252_ZB11_View2_201681115127
  • DynamicSignals_Kinetic_Systems_V252_ZB11_View3_201681115127
  • DynamicSignals_Kinetic_Systems_V252_ZB11_View4_201681115127

DynamicSignals / Kinetic Systems V252-ZB11 16-Channel, 8-Pole Analog Filter



This DynamicSignals / Kinetic Systems V252-ZB11 16-Channel, 8-Pole Analog Filter is used and in excellent condition.

Configuration:
• Programmable Gain




Have a quote from somewhere else? Click Here
Stock # 89540-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
DynamicSignals / Kinetic Systems V252 Series 8-Pole Analog Filters

Features
  • 8 or 16 Differential Channels
  • 8-Pole Low-Pass Filters with Plug-In Headers
  • Optional Programmable Gain Per Channel
  • Optional Simultaneous Sampling
  • Output Available at Front Panel or MUX-Bus

Description

The DynamicSignals / Kinetic Systems V252 Series 8-Pole Analog Filters are single-width, C-size, register-based, VXIbus modules that contains 8 or 16 channels of fixed-frequency, low-pass filtering. Each differential input signal is received by an instrumentation amplifier which provides a high common mode rejection ratio. The V252-ZA12 and -ZC12 options provide filtering at unity gain. Pre-filter gains of 1, 10, and 100 as well as post-filter gains of 0.5, 1, 2, 5, and 10 are provided on the V252-ZB12 and -ZD12 options. The selection of gain is programmable on a channel-by-channel basis.

Eight-pole, low-pass, Bessel, Butterworth, Elliptic, or Constant-delay filters may be selected for each channel. This module is capable of providing filter cutoff frequencies from 10 Hz to 100 kHz. Cutoff frequencies are established by plug-in filter headers. These headers must be ordered separately. Standard headers provide nominal cutoff frequencies from 10 Hz to 100 kHz in a 1, 2, 5, ... progression.

This filter module is also available with an optional sample/hold amplifier per channel. This option provides for simultaneous sampling of all channels by usin g the VXI trigger lines. Input and output signals appear at the V252 front panel on 68-contact High Density connectors. The differential input signals are brought in via one of these connectors, and the filtered output pairs use a second connector. The output signals are also available as four multiplexed channels on the VXI Local Bus for the V207 or V208 ADC using the Kinetic Systems MUX-bus protocol.

Calibration inputs are provided via a host ADC reference from the VXI Local Bus or from an on-board reference. The calibration signals may be selectively placed on any channel. A Calibration Register is used to select the desired channel.

The V252 supports both static and dynamic configuration. It may by accessed using A24/A16, D16 data transfers.


Product Family: V252 Series, V252-ZB11, V252ZB11, V252-ZA12,V252ZA12, V252-ZA12, V252ZA12, V252-ZC12, V252ZC12, V252-ZD12, V252ZD12, V252-ZA22, V252ZA22, V252-ZB22, V252ZB22, V252-ZC22, V252ZC22, V252-ZD22, V252ZD22


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

DynamicSignals / Kinetic Systems V252 Series 8-Pole Analog FiltersDynamicSignals / Kinetic Systems V252 Series 8-Pole Analog FiltersDynamicSignals / Kinetic Systems V252 Series 8-Pole Analog Filters
DynamicSignals / Kinetic Systems V252 Series 8-Pole Analog Filters


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 89540-1 - DynamicSignals / Kinetic Systems V252-ZB11 16-Channel, 8-Pole Analog Filter


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html