RKI Instruments H2S Hydrogen Sulfide Explosion Proof Stand Alone Transmitter
  • RKI_Instruments_H2S_Hydrogen_Sulfide_View1_20161114112939
  • RKI_Instruments_H2S_Hydrogen_Sulfide_View2_20161114112939
  • RKI_Instruments_H2S_Hydrogen_Sulfide_View3_20161114112939
  • RKI_Instruments_H2S_Hydrogen_Sulfide_View4_20161114112939
  • RKI_Instruments_H2S_Hydrogen_Sulfide_View5_20161114112939

RKI Instruments H2S Hydrogen Sulfide Explosion Proof Stand Alone Transmitter

This unit is equipped with an H2S Hydrogen Sulfide Detector. Electrochemical sensor is used and is a consumable component with a limited functional life. A replacement sensor may be needed at any time.

• Sensors: Electrochemical
• Measuring Ranges: 0 - 100 ppm
• Accuracy: ± 5% of Reading or ± 2 ppm H2S
• Operating Temperature: -40°F to 104°F (-40°C to 40°C)

Part Number: 65-2645RK-05 / H2S
H2S Hydrogen Sulfide Detector Part Number: 65-2428

View Photo of H2S Detector.
H2S Detector Manual (pdf)

Have a quote from somewhere else? Click Here
Stock # 90419-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
RKI Instruments M2A Series Stand Alone Transmitters

  • Operates With or Without a Controller
  • Direct Digital Readout with OLED Cold Temperature Display
  • Infrared Sensor for Combustibles and CO2
  • (2) Fully Programmable Alarm Relays & Fail Relay


The RKI Instruments M2A Series Stand Alone Transmitters are state-of-the-art transmitters that can operate as an independent, stand-alone monitor or as part of an integrated system. The M2A connects with an analog or digital signal to virtually any controller, PLC, or DCS. Setup procedures are simplified with user friendly push buttons and OLED menus. It utilizes a magnetic wand technique for performing non-intrusive calibration. The M2A provides an automatic zero drift correction feature, which results in more stable readings and reduces the need for adjustments due to sensor aging.

The housing of the M2A does not need to be opened for zeroing or calibration, making it unnecessary to declassify the area for routine maintenance. It is designed so that a complete field calibration can be performed by one person. Sensor construction is rated Class I, Div. 1 Groups B, C, D for flammables, CO, H2S, O2, and CO2, and Class I, Div. 2 for all other toxics.

The transmitter provides a 4-20 mA output in addition to a Modbus digital output. It also has two levels of alarms with relays, plus a fail alarm with relay. A digital display of the gas concentration, as well as alarm and status lights, can be viewed through the front window.

The toxic sensors are electrochemical type plug-in sensors, which provide high specificity, fast response, and long life. The plug-in design allows quick replacement in the field with no tools required. Toxic sensors are designed for use in Class I, Div. 2 hazardous locations. Sensors are manufactured for NH3, SO2, PH3, AsH3, and HCN.

Product Family: M2A Series, 65-2640RK, 65-2640RK-05, 65-2641RK, 65-2641RK-05, 65-2643RK-05, 65-2645RK-05, 65-2646RK-05, 65-2649RK-CH4, 65-2658RK-CH4, 65-2649RK-HC, 65-2660RK-02, 65-2660RK-03, 65-2660RK-05, 65-2660RK-10

Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.

Contact Us


Contact Us

Item Images

Click a thumbnail to view larger image:

RKI Instruments M2A Series Stand Alone TransmittersRKI Instruments M2A Series Stand Alone TransmittersRKI Instruments M2A Series Stand Alone Transmitters
RKI Instruments M2A Series Stand Alone Transmitters

Contact Us

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection

Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!

InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Item to Inspect: 90419-1 - RKI Instruments H2S Hydrogen Sulfide Explosion Proof Stand Alone Transmitter

All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html