duTec IOP-AD I/O Plexer Controller
  • duTec_IOP_AD_View1_2016122114830
  • duTec_IOP_AD_View2_2016122114830
  • duTec_IOP_AD_View3_2016122114830
  • duTec_IOP_AD_View4_2016122114830

duTec IOP-AD I/O Plexer Controller



This unit is for analog and digital signals.





Have a quote from somewhere else? Click Here
Stock # 90590-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
duTec IOP Series I/O Plexer Controllers

Features
  • Small, Completely Self-Contained, and Industrial Grade
  • Exchange Data with a Host Computer via a Serial Communication Link
  • Serial Link Eliminates Need for Expensive and Noise Prone Field Wiring Between Sensors and Actuators
  • Performs Many Ranging and Statistical Operations

Description

The duTec IOP Series I/O Plexer Controllers are a family of small, completely self-contained, industrial grade, remote data acquisition and control systems which exchange data with a Host computer via a serial communication link. Controlled by a Host, I/OPlexers are located near the sensors and actuators. The serial link eliminates the need for expensive and noise prone field wiring between sensors and actuators, and a central control room.

In applications such as remote process monitoring, factory automation, and energy management, a variety of signals must be transmitted over long distances. Instead of requiring expensive, multi-conductor, sensor wiring for each signal, cabling costs can be reduced significantly by using I/O PLEXERs and a single communications circuit. One of the most useful features of the I/O PLEXER is that in addition to gathering "raw" data, it can be instructed to perform many ranging and statistical operations on the data before it is given to the Host; thus allowing the Host to spend less time manipulating numbers and more time gathering them. Also the I/O PLEXER is able to spend more time exposed to the data which in turn allows it to base its responses to the Host on more samples of data. The I/O PLEXER may also be directed to manipulate the outputs in specific ways to produce delayed or repetitive effects.


Product Family: IOP-AD, IOPAD, IOP-D, IOPD, IOP-DE, IOPDE


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

duTec IOP Series I/O Plexer ControllersduTec IOP Series I/O Plexer ControllersduTec IOP Series I/O Plexer Controllers
duTec IOP Series I/O Plexer Controllers


Contact Us
Share:
Manuals, Datasheets, Drivers, Links

duTec IOP Series Datasheet (pdf) 
duTec IOP Series Manual (pdf) 
Link to duTec Website 


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 90590-1 - duTec IOP-AD I/O Plexer Controller


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html