Abaco Systems / SBS / Logical Design Group VME-TB21 P2 Adapter for Disk Drive Cabling Transition Board
- Directly Plug Compatible with the VME-V5B and V5C Embedded PC’s
- P2 Ribbon Cable Break-Out for Floppy, IDE and SCSI
- Power Distribution for Drives
- Provides P2 Peripheral Interface for Drive Modules
The Abaco Systems / SBS / Logical Design Group VME-TB21 P2 Adapter for Disk Drive Cabling Transition Board is a companion to the VME-V5B and the V5C Embedded PC's for connecting remotely mounted floppy drives and hard drives. The VME-TB21 routes the VME-V5B and the V5C peripheral control signals supplied by rows a and c of the P2 connector to ribbon cable connectors. The ribbon cable connectors are compatible with industry standard signal definitions. The VME-TB21 plugs directly onto the back of the P2 backplane in the slot position occupied by the VME-V5B or the V5C. The extended VMEbus signals on row b are not connected to the VME-TB21. The backplane must have extended pins with shrouds to accommodate the VME-TB21 connector.
Product Family: VME-TB21, VMETB21, TB21, 9000-70-048, 900070048
Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.