Siemens 6DD1602-0AE0 PS16 Processor Module
  • Siemens_6DD1602_0AE0_PS16_View1_20173211315
  • Siemens_6DD1602_0AE0_PS16_View2_20173211315
  • Siemens_6DD1602_0AE0_PS16_View3_20173211315

Siemens 6DD1602-0AE0 PS16 Processor Module

There is oxidation on on this board due to storage; however, this will not prevent it from functioning.

• Processor: AMD 80C186, 16 Mhz
• Memory: 64 KB RAM

Have a quote from somewhere else? Click Here
Stock # 91514-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Siemens 6DD1602-0AE0 PS16 Processor Module

  • For Use in the SIMADYN D System
  • Processes Technological Control, Numerical and Regulating Functions
  • Designed Around the 16 Microprocessor 80C186
  • (8) Binary Inputs
  • (8) Frequency/Digital Converter Inputs
  • (4) Binary Outputs


The Siemens 6DD1602-0AE0 PS16 Processor Module is designed to process technological control, numerical and regulating functions in the SIMADYN D system. The board is especially suitable for the software processing of actual values in converters. The board is designed around the 16 microprocessor 80C186 with the corresponding peripherals.

Plug-in memory modules are used to contain the user programs as well as the system firmware (operating system, monitor program and function module code). These modules (MS...) are plugged into the board connector X50. The user programs run on the processor under the SIMADYN D real time operating system. This guarantees interrupt controlled fixed cycle times, dependent upon the configuration, of ≥ 1ms.

The PS16 board contains 8 binary inputs (plug connector X6) that may also be configured as interrupt controlled inputs. The processor interrupts the current cyclic processing, when an edge occurs at one of these inputs and immediately begins processing the interrupt controlled function packet (process interrupt job, PIJ). The inputs are connected with the various SIMADYN D interface modules via a 10 conductor ribbon cable.

The board is designed with 8 Frequency/digital converter inputs for the acquisition of actual values (plug connector X7). Frequency modulated signals can be read via these inputs and converted to digital values for further processing. The analog actual values are channeled via the SE21 interface module, whereby 2, 4, 8 of the input channels may be selected and read in parallel. In addition, the board contains 4 binary outputs on the X7 plug connector.

The inputs and outputs of the processor internal timers T0 and T1 can be externally accessed via the X5 plug connector. The serial interface (plug connector X01) is designed for diagnostics using the SIMADYN D host terminals PG 675 or PG 685.

The 7 segment display H1 on the board front panel indicates the configured processor ID code in normal operation. The display flashes with an error code when an fault occurs on the board.

The display shows a "-" during system start up.
The HEX monitor is activated if the S1 key is pressed and an error code is being displayed.

A board reset (start up) can be forced using the test jacks X10 and X11 . The test jacks should be bridged with either a switch or a shorting jumper. The board is designed with a 50 pin (X4) and a 10 pin (X9) plug connector for hardware diagnostics using a logic analyzer or for the connection of a passive recorder.

Three "watchdogs" are available for each processor module to monitor the hardware and software functionality.

Product Family: 6DD1602-0AE0 PS16, 6DD1602 0AE0 PS16, 6DD16020AE0 PS16, 6DD1602-0AE0, PS-16, 6DD1602 0AE0, PS 16, 6DD16020AE0, PS16

Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.

Contact Us


Contact Us

Item Images

Click a thumbnail to view larger image:

Siemens 6DD1602-0AE0 PS16 Processor ModuleSiemens 6DD1602-0AE0 PS16 Processor ModuleSiemens 6DD1602-0AE0 PS16 Processor Module

Contact Us
Manuals, Datasheets, Drivers, Links

Siemens PS16 Datasheet (pdf) 
Link to Siemens Website 

Contact Us

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection

Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!

InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Item to Inspect: 91514-1 - Siemens 6DD1602-0AE0 PS16 Processor Module

All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE)