Measurement Computing CIO-DDA06/16 Analog Output Board
  • Measurement_Computing_CIO_DDA06_16_View1_2017419154141
  • Measurement_Computing_CIO_DDA06_16_View2_2017419154141
  • Measurement_Computing_CIO_DDA06_16_View3_2017419154141

Measurement Computing CIO-DDA06/16 Analog Output Board







Have a quote from somewhere else? Click Here
Stock # 91865-1
In Stock: Yes
Price: Contact Us
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Measurement Computing CIO-DDA06/16 Analog Output Board

Features
  • (6) Channels of 16-Bit Analog Output
  • (24) Lines of Digital I/O
  • Output Ranges are Switch-Selectable for a Bipolar or Unipolar Range
  • Analog Outputs are Jumper-Selectable for Either Individual or Simultaneous Transfer

Description

The Measurement Computing CIO-DDA06/16 Analog Output Board has six channels of 16-bit analog output and 24 lines of digital I/O. The analog outputs are from AD660 DACs, with each output buffered by an OP27. Digital I/O is performed with one 82C55 chip.

Analog output ranges are switch-selectable for a Bipolar or Unipolar range. Bipolar ranges are ±10 V and ±5 V. Unipolar ranges are 0 to 10 V and 0 to 5 V.

The analog outputs are jumper-selectable for either individual or simultaneous transfer. When a DAC pair is set for simultaneous update, writing new digital values to the DAC's control register does not update the DAC's voltage output. In this way, the CIO-DDA06/16 may be set to hold new values until all channels are loaded, then update all six channels simultaneously. This is a very useful feature for multi-axis motor control.

The CIO-DDA06/16 digital I/O lines are a direct interface to an 82C55. The 82C55 is a CMOS chip with TTL level inputs and outputs. The 8255 can source or sink about 2.5 mA. This is adequate to switch other TTL or similar inputs, but is inadequate to drive relays, LEDs or solid state relays. The digital I/O is controlled by programming the 8255's mode register. There are three possible modes. The simplest and most commonly used mode is mode 0 - simple input and output.


Product Family: CIO-DDA06/16, CIO DDA06/16, CIODDA06/16


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Measurement Computing CIO-DDA06/16 Analog Output BoardMeasurement Computing CIO-DDA06/16 Analog Output BoardMeasurement Computing CIO-DDA06/16 Analog Output Board


Contact Us
Share:
Manuals, Datasheets, Drivers, Links

Measurement Computing CIO-DDA06/16 Manual (pdf) 
Link to Measurement Computing Website 


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 91865-1 - Measurement Computing CIO-DDA06/16 Analog Output Board


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html