GE / Bently Nevada 200150-03-05 Accelerometer
  • GE_Bently_Nevada_200150_View4_20171030162759
  • GE_Bently_Nevada_200150_View1_20171030162759
  • GE_Bently_Nevada_200150_View2_20171030162759
  • GE_Bently_Nevada_200150_View3_20171030162759
  • GE_Bently_Nevada_200150_View5_20171030162759

GE / Bently Nevada 200150-03-05 Accelerometer



This unit includes 3/8-24 to 1/2-20 UNF 1-3/8 inch Hex Plate Stud Mounting Stud Option. Each Accelerometer has the CSA, ATEX, and IECEx agency approvals engraved on the side casing.

Configuration:
• Measurement Range: ±245 m/s2 (g) (±25m/s2 (g))
• Frequency Range: 10 to 1000 Hz (600 to 60,000 Hz)
• Settling Time (ms): ≤300 ms
• Broadband Electrical Noise: 14.7 (1.5) mm/s2 (mg)

Part Number: 200150-03-05




Have a quote from somewhere else? Click Here
Stock # 93710-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
GE / Bently Nevada 20015x Series Accelerometers

Features
  • Wide Frequency
  • Hermetically Sealed, Stainless Steel Case
  • Extremely Rugged Transducer
  • Suited for Harsh Industrial Environments

Description

The GE / Bently Nevada 20015x Series Accelerometers are general purpose, wide frequency, case-mounted seismic transducers designed for use with Trendmaster proTIMs.

The 200150 Accelerometer also operates with the Trendmaster2000 system. The accelerometer interfaces with the 200100 Dual Acceleration to Velocity flexiTIM Module and the 89130-01 Acceleration-to-Velocity TIM (Transducer Interface Module), as well as the 1900/25 and 1900/27 monitors.

The 20015x Accelerometers feature a hermetically sealed, stainless steel case. This design provides an extremely rugged transducer that is well suited for harsh industrial environments. The transducer's top-mounted, 5-pin connector allows you to easily install and remove the interconnecting signal cable. A 3/8-24 threaded hole on the bottom of the sensor's casing accommodates several mounting options.

The 20015x Accelerometers contain a piezoelectric sensing device that generates a charge when it is subjected to vibration. The accelerometers electronically convert this charge to a differential voltage signal that is proportional to the acceleration that is parallel to the sensitive axis of the transducer.


Product Family: 20015x Series, 200150, 200155, 200157


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

GE / Bently Nevada 20015x Series AccelerometersGE / Bently Nevada 20015x Series AccelerometersGE / Bently Nevada 20015x Series Accelerometers
GE / Bently Nevada 20015x Series AccelerometersGE / Bently Nevada 20015x Series Accelerometers


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 93710-1 - GE / Bently Nevada 200150-03-05 Accelerometer


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html