National Instruments GPIB-RS232 GPIB Serial Port Controller/Converter
  • National_Instruments_GPIB_RS232_View2_2017113014471
  • National_Instruments_GPIB_RS232_View3_2017113014471
  • National_Instruments_GPIB_RS232_View4_2017113014471
  • National_Instruments_GPIB_RS232_View5_2017113014471
  • National_Instruments_GPIB_RS232_View6_2017113014471

National Instruments GPIB-RS232 GPIB Serial Port Controller/Converter



This module includes the power supply.

Part Number: 191971C-01L




Have a quote from somewhere else? Click Here
Stock # 94013-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
National Instruments GPIB-RS232 GPIB Serial Port Controller/Converter

Features
  • Maximum Data Transfer Rates (Baud Rates) of 115.2 kb/s
  • Four Modes of Operation
  • Completely IEEE 488.2 Compatible

Description

The National Instruments GPIB-RS232 GPIB Serial Port Controller/Converter is a high-performance serial-to-GPIB interface. With it connected, a computer with an RS232 serial port can be a talker, listener, or controller on the GPIB bus. The NI GPIB-RS232 can also interface RS232 instruments and peripherals to the GPIB. The GPIB-RS232 has all the software and logic required to implement the physical and electrical specifications of the IEEE 488 and RS232 standards. It can interpret and execute high-level commands sent to it over the serial port, performing RS232-to-GPIB protocol conversions, as well as interpret commands sent over GPIB, performing GPIB-to-RS232 protocol conversions.

The GPIB-RS232 uses the TNT5004 controller chip, implementing all IEEE 488 talker/listener/controller functionality. Two protection mechanisms (data buffering and handshaking) ensure that the GPIB-RS232 does not lose incoming serial data. The GPIB-RS232 has an internal RAM buffer that stores incoming serial data until it can output the data to the GPIB port. The serial RAM buffer size is 1 MB. When the serial RAM buffer is nearly full, the GPIB-RS232 can handshake with the serial host to stop data transmission. When more space is available in the buffer, the GPIB-RS232 can again handshake with the serial host to start data transmission. The GPIB-RS232 can use both the XON/XOFF software handshaking and the hardware handshaking protocols.


Product Family: GPIB-RS232


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

National Instruments GPIB-RS232 GPIB Serial Port Controller/ConverterNational Instruments GPIB-RS232 GPIB Serial Port Controller/ConverterNational Instruments GPIB-RS232 GPIB Serial Port Controller/Converter
National Instruments GPIB-RS232 GPIB Serial Port Controller/Converter


Contact Us
Share:
Manuals, Datasheets, Drivers, Links

National Instruments GPIB-RS232 Datasheet (pdf) 
Link to National Instruments Website 


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 94013-1 - National Instruments GPIB-RS232 GPIB Serial Port Controller/Converter


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html