RTD Embedded Technologies DM5416-2 Digital-To-Analog I/O DataModule
  • RTD_Embedded_Technologies_DM5416_View1_2018515115637
  • RTD_Embedded_Technologies_DM5416_View2_2018515115637
  • RTD_Embedded_Technologies_DM5416_View3_2018515115637
  • RTD_Embedded_Technologies_DM5416_View4_2018515115637

RTD Embedded Technologies DM5416-2 Digital-To-Analog I/O DataModule

Part Number: 1880308

Have a quote from somewhere else? Click Here
Stock # 95921-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
RTD Embedded Technologies DM5416 Analog I/O DataModule

  • (8) Differential or (16) Single-Ended Analog Input Channels
  • 16-Bit, 10 Microsecond Analog-Digital Converter with 100 kHz Max. Throughput
  • -10 to +10 V Input Range
  • 1024 x 16 Channel-Gain Scan Memory with Skip Bit
  • Scan, Burst, and Multiburst Using the Channel-Gain Table
  • DMA Transfer


The RTD Embedded Technologies DM5416 Analog I/O DataModule has analog-to-digital circuitry that receives up to 8 differential or 16 single-ended analog inputs and converts these inputs into 16-bit digital data words which can then be read or transferred to PC memory. The module is factory set for single-ended input channels.

The analog input voltage range is -10 to +10 volts. Overvoltage protection to ±35 volts is provided at the inputs . The common mode input voltage for differential operation is ±10 volts. The high-performance A/D converter supports fast-settling, software-programmable gains of 1, 2, 4, and 8.

A/D conversions are performed in 10 microseconds, and the maximum throughput rate of the module is 100 kHz. Conversions are controlled by software command, by an on-board pacer clock, by using triggers to start and stop sampling, or by using the sample counter to acquire a specific number of samples. Several trigger sources can be used to turn the pacer clock on and off, giving you exceptional flexibility in data acquisition. Scan, burst, and multiburst modes are supported by using the channel-gain scan memory. A first in, first out (FIFO) sample buffer helps your computer manage the high throughput rate of the A/D converter by acting as an elastic storage bin for the converted data. Even if the computer does not read the data as fast as conversions are performed, conversions can continue until the FIFO is full.

Product Family: DM5416, DM/5416, DM.5416, DM 5416, DM-5416, DM5416-2, DM5416-1

Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.

Contact Us


Contact Us

Item Images

Click a thumbnail to view larger image:

RTD Embedded Technologies DM5416 Analog I/O DataModuleRTD Embedded Technologies DM5416 Analog I/O DataModuleRTD Embedded Technologies DM5416 Analog I/O DataModule
RTD Embedded Technologies DM5416 Analog I/O DataModule

Contact Us

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection

Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!

InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Item to Inspect: 95921-1 - RTD Embedded Technologies DM5416-2 Digital-To-Analog I/O DataModule

All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html