Bosch / Rexroth / Indramat PPC.R02.2N-N-N1-V2-NN-FW Modular Controller
  • Bosch_Rexroth_Indramat_PPC_R02_2_View1_20185161377
  • Bosch_Rexroth_Indramat_PPC_R02_2_View2_20185161377
  • Bosch_Rexroth_Indramat_PPC_R02_2_View3_20185161377
  • Bosch_Rexroth_Indramat_PPC_R02_2_View4_20185161377

Bosch / Rexroth / Indramat PPC.R02.2N-N-N1-V2-NN-FW Modular Controller

PPC.R02.2N-N-N1-V2-NN-FW Configuration:
• Product Group PPC: PPC
• Housing Version R: RECO Unit
• Series 02: 2
• Version 2: 2
• Memory Expansion Module N: Not Fitted
• Other Version: None
• Configuration N1: NSW01.1R
• Configuration V2: DeviceNet Slave Module
• Configuration NN: Not Fitted
• Firmware FW: Ordered Separate

PSM01.1-FW Firmware Card:
• FWB-PSM01*-GP*-09V37-MS

Have a quote from somewhere else? Click Here
Stock # 95927-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Bosch / Rexroth / Indramat PPC.R Series Modular Controller

  • SERCOS Interface
  • X16 Programming Interface
  • X10 Serial Interface
  • Optional Expansion Slots


The Bosch / Rexroth / Indramat PPC.R Series is a powerful controller in a small size in IP 20 rating. It is a general-purpose platform that works as a PLC or as an NC controller, depending on the application and the loaded software.

The PPC-R unit exists with two enclosure versions of different width. A single-width version and a double-width version.

The two interfaces that are manufactured on the controller are fully connected according to the Indramat standard (SIS = Serial Indramat Interface). The data transfer type (function) is only selected by the related application (RS232/RS422/RS485). With PPC-R01, the COM interface is brought out via a separate slot plate if this has not yet been assigned for a different purpose (by the PC/104 Field bus, for example).

Furthermore, the PPC-R unit has a BT bus (operator input terminal bus) that permits application-related operator input terminals (BTM15/16, BTA20, etc.) to be used. This is possible with a cable length of up to 50 m.

To install the PPC-R unit, a module carrier system is used that consists of one or more RMB02.2-04 units. The double carrier RMB02.2-02 can only be used as an installation carrier. It is merely used for fixing the PPC-R units; RECO modules cannot be controlled. Interconnecting several PPC- R units via a backplane is not possible either.

The PPC-R01.2 unit occupies one slot in the module carrier; the PPC- R02.2 occupies two units. In this carrier system, the PPC-R unit can handle up to 15 further I/O modules (RME02.2..., RMA02.2... or RMC02.2...).

Depending on the application, the PPC-R has PC/104 modules fitted that, for example, can be used for open field bus interfaces, such as Interbus, Profibus, etc.

Product Family: PPC.R Series, PPC.R, PPC-R01.2, PPC-R02.2

Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.

Contact Us


Contact Us

Item Images

Click a thumbnail to view larger image:

Bosch / Rexroth / Indramat PPC.R Series Modular ControllerBosch / Rexroth / Indramat PPC.R Series Modular ControllerBosch / Rexroth / Indramat PPC.R Series Modular Controller
Bosch / Rexroth / Indramat PPC.R Series Modular Controller

Contact Us

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection

Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!

InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Item to Inspect: 95927-1 - Bosch / Rexroth / Indramat PPC.R02.2N-N-N1-V2-NN-FW Modular Controller

All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE)