Precision Analog Systems PAS 9715/A0 32 Channel, 12-Bit VME Analog Output Card
  • Precision_Analog_Systems_PAS_9715_A0_View1_2018912131517
  • Precision_Analog_Systems_PAS_9715_A0_View2_2018912131517
  • Precision_Analog_Systems_PAS_9715_A0_View3_2018912131517
  • Precision_Analog_Systems_PAS_9715_A0_View4_2018912131517

Precision Analog Systems PAS 9715/A0 32 Channel, 12-Bit VME Analog Output Card







Have a quote from somewhere else? Click Here
Stock # 97817-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
Precision Analog Systems PAS 9715/AO 32 Channel, 12-Bit VME Analog Output Card

Features
  • (32) Channels of Analog Voltage Outputs, with a 12-Bit D/A Converter per Channel
  • Calibrated with a Precision On Board Voltage Reference
  • Reset to Bipolar Zero During Power Up Reset
  • Outputs Can Be Disconnected from Field Wiring Through Low Impedance FET Switches
  • Output impedance of 0.6 Ω

Description

The Precision Analog Systems PAS 9715/AO 32 Channel, 12-Bit VME Analog Output Card provides thirty-two, twelve bit analog voltage output channels on a 6U VMEbus card. VME systems with A16, A24, or A32 addressing are supported, and data writes of 16 or 32 bits can be used. Pluggable jumpers are used to configure the width of the address bus and the data bus width is specified by the instruction type.

Eight, quad high speed voltage output DACs, with 6 uSec settling times are used to provide a total of thirty two analog output channels. The voltage output signals are available on a pair of 37 pin D connectors mounted through the front panel. These connectors also terminate four digital output signals. All of the analog outputs can be disconnected from the field wiring through on board, low impedance FET switches.

Six analog output ranges are available, under program control, which allows the card's output voltage to be tailored to your application. Bipolar ranges from ± 10 volts to ± 2.5 volts and unipolar ranges from 0 to 10 volts to 0 to 2.5 volts are supported. All output ranges provide a minimum of 5 milliamps of output current.

External synchronization signals and the card's voltage reference are available in a separate six-position connector at the front panel. Additional features include a board identifier PROM, control and status register, and DAC loop back registers.


Product Family: PAS 9715/AO, PAS9715/AO, PAS 9715/A0, PAS9715/A0, PAS 9715-AO, PAS 9715, PAS-9715, PAS9715


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

Precision Analog Systems PAS 9715/AO 32 Channel, 12-Bit VME Analog Output CardPrecision Analog Systems PAS 9715/AO 32 Channel, 12-Bit VME Analog Output CardPrecision Analog Systems PAS 9715/AO 32 Channel, 12-Bit VME Analog Output Card
Precision Analog Systems PAS 9715/AO 32 Channel, 12-Bit VME Analog Output Card


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 97817-1 - Precision Analog Systems PAS 9715/A0 32 Channel, 12-Bit VME Analog Output Card


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html