SP Scientific / Genevac 04-0817 Vent Valve Regulator PCB
  • SP_Scientific_Genevac_04_0817_View1_20189259041
  • SP_Scientific_Genevac_04_0817_View2_20189259041
  • SP_Scientific_Genevac_04_0817_View3_20189259041
  • SP_Scientific_Genevac_04_0817_View4_20189259041

SP Scientific / Genevac 04-0817 Vent Valve Regulator PCB

Part Number: 019, 4572, 04-0817, BDA08024CV

Have a quote from somewhere else? Click Here
Stock # 97934-10
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
SP Scientific / Genevac HT-8 / HT-12 Series II High Performance Evaporator

  • High Capacity Design Takes 32(HT-8) or 48(HT-12) Shallow-Well Plates
  • Fully PC Controlled for Easy, Flexible Operation
  • Strong Rotor for Sample Loads of up to 1.5kg on Each Sample Swing
  • Multi-Stage Runs for Maximum Evaporation Speed with High Boiling Point Solvents
  • Corrosion Proof Against Trifluoracetic Acid and Other Corrosive Vapors
  • Remote Control and Data Logging Available


The SP Scientific / Genevac HT-8 / HT-12 Series II High Performance Evaporator is Based on the same core technology as the successful HT-4X, these two machines are configured with multiple level rotors and front-opening doors. This gives significant increases in capacity without using extra bench space. The HT-8 system has a two-layer rotor capable of holding eight sample swings at one time. With shallow-well microplates in Genevac FastStack holders, 32 plates may be dried down together in an HT-8. Tube and vial capacities are similarly impressive; 320 tubes of 13mm x 100mm length can be run at one time.

For very high throughput applications the Genevac HT-12 presents a triple-deck rotor, pushing up the capacity even further to 48 microplates or 480 tubes 13 x 100mm. Formats may also be mixed within the evaporator, provided balance is maintained, so that combinations of tubes, vials, reaction blocks and microplates can be run simultaneously, although this is not recommended due to uneven parts wear.

Product Family: HT8, HT12, HTI2

Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.

Contact Us


Contact Us

Item Images

Click a thumbnail to view larger image:

SP Scientific / Genevac HT-8 / HT-12 Series II High Performance Evaporator

Contact Us

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection

Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!

InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Item to Inspect: 97934-10 - SP Scientific / Genevac 04-0817 Vent Valve Regulator PCB

All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html