ESD Electronics VME-CAN4 Intelligent Board for 4 CAN or DeviceNet Channels
  • ESD_Electronics_VME_CAN4_View1_2018112891727
  • ESD_Electronics_VME_CAN4_View2_2018112891727
  • ESD_Electronics_VME_CAN4_View3_2018112891727
  • ESD_Electronics_VME_CAN4_View4_2018112891727

ESD Electronics VME-CAN4 Intelligent Board for 4 CAN or DeviceNet Channels



Configuration:
• 4 Independant CAN Channels
• 11 and 29 bit CAN Identifier
• Integrated Firmware with CAL/CMS
• CANopen Support

Part Number: VME-CAN4, VME-CAN4-4, 1408.02




Have a quote from somewhere else? Click Here
Stock # 98675-1
Quick Quote
Sell Yours
Repair Quote
  • More Info
  • Tech Specs
  • Additional Photos
  • Datasheets / Manuals 
  • View It Live Request 
Contact Us
Share:
ESD Electronics VME-CAN4 Intelligent Board for 4 CAN or DeviceNet Channels

Features
  • Full CAN Controller by Integrated Firmware for Any Identifier
  • Each Channel with Separate Microcontroller and its Own CAN Controller
  • Lossless Data Exchange with VMEbus

Description

The ESD Electronics VME-CAN4 Intelligent Board 4 CAN or DeviceNet Channels are equipped with their own micro controller of type 68331 at 20 MHz clock frequency. Each micro controller has a working memory of 256 kbytes available. After a RESET, the micro controller program code is loaded from the local Flash EPROM. Program updates can be loaded into the Flash EPROM via the VMEbus.

The CAN data transfer from and to the VMEbus is performed via a Shared RAM with a capacity of 512 kbytes and FIFOs. Received Rx data generates a local interrupt, which will be processed by the belonging micro controller. It stores the data in the Shared RAM and the identifier is stored in the FIFO (FIFO to master). Then it generates a VMEbus interrupt. For each of the four CAN channels an individual interrupt vector is generated.

To transmit CAN data, the VMEbus master enters the data into the Shared RAM. With this, automatically a pointer to the identifier is stored in the FIFO (FIFO to slave). The belonging micro controller reads FIFO and RAM and starts the data transmission.


Product Family: VME-CAN4, VMECAN4, VME CAN4


Important Notice: Please note that any additional items included with this equipment such as accessories, manuals, cables, calibration data, software, etc. are specifically listed in the above stock item description and/or displayed in the photos of the equipment. Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information.


Contact Us
Share:

Specifications

Contact Us
Share:

Item Images

Click a thumbnail to view larger image:

ESD Electronics VME-CAN4 Intelligent Board for 4 CAN or DeviceNet ChannelsESD Electronics VME-CAN4 Intelligent Board for 4 CAN or DeviceNet ChannelsESD Electronics VME-CAN4 Intelligent Board for 4 CAN or DeviceNet Channels
ESD Electronics VME-CAN4 Intelligent Board for 4 CAN or DeviceNet Channels


Contact Us
Share:
Manuals, Datasheets, Drivers, Links

ESD Electronics VME-CAN4 Datasheet (pdf) 
Link to ESD Electronics Website 


Contact Us
Share:

View It Live

View equipment LIVE - Before you buy!

InstraView™ Equipment Inspection



Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.

Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.

InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.

It's like having the store come to you!


InstraView Request Form

To get started:

  1.   Fill in the request form below
  2.   We'll send you an email letting you know exactly when your piece of equipment will be available for viewing

Name:
Email:
Item to Inspect: 98675-1 - ESD Electronics VME-CAN4 Intelligent Board for 4 CAN or DeviceNet Channels


All you need is a web browser (ie. Microsoft Internet Explorer or Netscape) and Sun's Java Runtime Environment installed. If you need to install the Sun Java Runtime, you may download the latest Java SE Runtime Environment (JRE) http://www.oracle.com/technetwork/java/javase/downloads/index.html