15 / 8585 Results
Items/Page
GE / Bently Nevada 330180-91-05 5/8 mm Proximitor Sensor
Probes and Extension Cables are sold separately.

Configuration:
(...)
• Total Length and Mounting Option: 9 Meters System Length, DIN Mount
• Agency Approval Option: Multiple Approvals

The GE / Bently 3300 XL 5/8mm Proximitor Sensor is compatible with all 5 and 8 mm 3300 and 3300 XL probes. The 3300 XL Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DINrail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting "footprint" with older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates.

Part Number: 330180-91-05

Parker / Compumotor AT6400 4-Axis Indexer PC Card
This Parker Compumotor AT6400 Four-Axis Indexer PC Card is used and in excellent condition. This unit is the newer style of the AT6400.

(...)
Configuration:
• External Connector
• 1.5 / 2 MB RAM

Product Family: AT6400-AUX1, AT6400-AUX1-120V, AT6400-AUX1-240V

Part Number: PCA 71-011823-03

GE / Bently Nevada 330400-02-00 Accelerometer Acceleration Transducer
Each Accelerometer has the CE, CSA, ATEX, and Brazil agency approvals engraved on the side casing.

Configuration:
(...)
• Mounting Thread Option: M8 x 1 Integral Stud

Part Number: 330400-02-00

Rockwell / Allen-Bradley 1771-IBD 10 to 30V DC Input Module
This Rockwell / Allen-Bradley 1771-IBD 10 to 30V DC Input Module is used and in excellent condition.
(...)

Rockwell / Allen-Bradley 1771-IBD Installation Instructions (pdf)

Part Number: 1771-IBD, 96134475, 96134473

GE / Bently Nevada 146031-01 I/O Module for 3500/22
This unit is also known as the 3500/22 10 Base-T/100 Base-TX I/O Module.

Part Number: 146031-01
Parker / Compumotor SX6 Microstepping System
This Parker Compumotor SX6 Microstepping System is used and in excellent condition.
(...)

The SX series of Drives and Indexers utilize Compumotor's X-Language and have more complex built-in functioning. The SX6 Drive can be configured by on-board switches to be any of the following models:

SX57-51, SX57-83, SX57-102, SX83-62, SX83-93, SX83-135

If you would like an ATG technician to set the switches to configure the SX6 to one of these particular models, please let us know when placing the order.

If the High Voltage Home inputs are needed, please contact for pricing and availability.

Input Voltage: 120 V

This model is also known as the Electric Cylinder Control S5201.

Baccara GEM-SOL 24V DC 5.5W Coil
Configuration:
• Coil Winding Insulation: H 180°
• Temp Range: -20°C to 150°C
• Duty Cycle: 100% ED. (Coil Temp 70°C at 20°C ambient)
(...)
• Protection: IP65 with Connector
• Voltage Range: Standard Industrial Voltage 6 to 415VAC or DC

Danaher Motion / IDC NextStep Single Axis Microstepping Drive
Configuration:
• AC Power Input: 90-120 VAC Single Phase, 50/60 Hz; 500 VA Max. at 7.9 amp Setting
(...)
• Motor Current: 0 - 7.9 amps, 0.1 amp Increments
• Fold Back: Automatic
• Bus Voltage: 160 VDC Nominal

GE / Bently Nevada 330130-080-00-00 3300 XL Standard Extension Cable
Configuration:
• Cable Length: 8 m (26.2 ft.)
• Connector Protector and Cable Option: Standard Cable
(...)
• Agency Approval Option: None
National Instruments ER-16 Electromechanical SPDT Relay
Configuration:
• Number of Channels: 16
(...)
• Relay Type: SPDT (1form C) non Latching

Part Number: 183064B-02, 777081-01

GE / Panametrics Magna-Mike 8500 Hall Effect Precision Thickness Gage
This unit is also known as the Olympus Magna-Mike 8500 Hall Effect Precision Thickness Gage. Probes are sold separately.

Includes:
(...)
•85RPC: Rubber Protective Carrying Case
•External Power Supply/charger for 8500

Cognex Checker 4G1 Vision Sensor
This unit does not include power supply, interface cables or software. Please contact manufacturer for pricing and availability.

(...)
Configuration:
• Sensor: Part Finding
• Inspection Sensors: Presence, Measurement or Position
• Maximum Inspection Rate: 400 Hz
• Lighting and Filter Options: Integrated Red, Blue, Green, and Infrared LEDs; Integrated Bright White LEDs Polarization

Part Number: 821-0070-1R, 821-0070-3R, 825-0178-1R, C4G1-24G-E00

GE / Bently Nevada 330400-01-05 Accelerometer Acceleration Transducer
Each Accelerometer has the CE, CSA, ATEX, and Brazil agency approvals engraved on the side casing.

Configuration:
(...)
• Mounting Thread Option: 1/4-28 UNF Integral Stud

Part Number: 330400-01-05

National Instruments PXI-7358 8-Axis High-Performance Stepper/Servo Motion Controller
This National Instruments PXI-7358 8-Axis High-Performance Stepper/Servo Motion Controller is a demo unit that was installed but never put into commission.

This is a hybrid-slot(...)
compatible PXI module that can be used in both PXI Express hybrid slots and standard PXI slots.

Configuration:

• PXI Module
• 8 Axes

Part Numbers: 190974E-08, 190974F-08L, 190974G-08L, 778540-08

Emerson / Asco EF8344G074 RedHat Piston/Poppet Solenoid Valve
Configuration:
• Solenoid: Single
• Pipe Size: 1/2 in.
• Orifice Size: 3/8 in.
(...)
• Cv Flow Factor, Press.: 1.4
• Operating Pressure Differential (PSI), Min.: 10
• Option: Explosionproof and Watertight

Part Number: EF8344G074
Rebuild Kit Number: 302711
Solenoid Cata. Number: EF8003G1

Ajax Loader

Loading Next...

Contact Us
Fax:

(240) 376-1381