This unit has a cracked housing.
Configuration:
• Bearing: Air
• EC Motor (Brushless DC) with High-Resolution Optical Encoder: Yes
• Permanent Torque (60 min), No Signal Drift: Yes
• EC Mode (Controlled Shear Rate and Shear Stress): Yes
• Maximum Torque: 200 mNm
• Minimum Torque, Rotation: 10 nNm
• Minimum Torque, Oscillation: 2 nNm
• Torque Resolution: 0.1 nNm
• Angular Deflection, Set Value: 0.1 to ∞ µrad
• Angular Deflection, Resolution: 10 nrad
• Step Rate, Time Constant: 5 ms
• Step Strain, Time Constant: 10 ms
• Step Time (Rate, Strain), 99% of Set Value (All Samples): 30 ms
• Minimum Angular Velocity: 10
-9 rad/s
• Maximum Angular Velocity: 314 rad/s
• Minimum Angular Frequency: 10
-7 rad/s
• Maximum Angular Frequency: 628 rad/s
• Normal Force Range: 0.005 to 50 N
• Normal Force Resolution: 0.5 mN
• Toolmaster, Measuring System: Yes
• Toolmaster, Measuring Cell: Yes
• QuickConnect for Measuring Systems, Screwless: Yes
• Electronic Trimlock for the Measuring System: Yes
• Virtually Gradient-Free (Horizontal, Veritcal) Temperature Control: Yes
• CoolPeltier, Peltier System with Built-In Cooling Option: -5 to 200°C
• Peltier-Based Convection Oven, Does Not Require LN
2 for Cooling: -20 to 180°C
• Actively Peltier-Controlled Hood, Peltier Technology: -40 to 200°C
• Concentric-Cylinder Peltier Temperature Control: -30 to 200°C
• Maximum Temperature Range: -150 to 1000°C
• Automatic Gap Control / Setting, AGC / AGS: Yes
• TruGap for In-Place Measurement and Control of the Gap: Yes
• T-Ready: Yes
• Direct Strain, Amplitude Controller: Yes
• Direct Stress, Amplitude Controller: Yes
• TruRate: Yes
• TruStrain: Yes
• Normal Force and Velocity Profiles, Tack, Squeeze: Yes
• Piezo Axial Actuator (PAA): No
Input Voltage: 100-230 VAC
View Photo of cracked housing.
Part Number: MCR 302