New & Used Fermenters Products

This New Brunswick Scientific BioFlo III Batch / Continuous Benchtop Fermentor is used and in excellent condition.

This unit was decommissioned from a production facility. We do not have the expertise to test this unit, but we believe it to be in working order. A very good effort was made to retain its components and spares together and we have documented all the information we can gather from it in this page. It will require some consumables and accessories as well as expertise in setting up such a system to become complete and ready to operate. We have documented and included photos of these components, replacement parts, and accessories that are included with this instrument. As can be seen in the photos, this unit is equipped with the Reaction Vessel.

Reaction Vessel Volume: 3.5L

This unit comes with the accessories described below:

New Brunswick Scientific Motor (Model Number: C32-D-450X) (view Photo).

The M1226-0101 gasket pack including M1152-9904 and P0280-8062 (view Photo).

Two vials P0640-0180 and four connectors M11519519 (view Photo).

Accessory pack M1226-0101 including M1016-0890, P0280-5292, P0280-5302, P0280-5362, P0280-5342, P0280-5932, P0280-5422, P0280-5472, P0280-5322, P0280-5912, P0160-6389, M1077-1040, M1226-9430, P0240-7960, P0180-0170, M1132-946T, M1151-9419 (view Photo).

Accessory pack M1226-0010 which includes H-960, P0660-2090, H-958, P0740-2540, M1226-9414, P0280-5292, P0200-0491, M1226-9430, P0280-6093, P0660-3250, M1052-1260 (view Photo).

pH probes and cables (view Photo).

DO cable, Anti-Foam cables (yellow / black), and the Temperature probe cable (view Photo).

The condenser water out / in tubes, and the water in / out tubes (view Photo).

Artisan Technology Group is not selling this item to be used on human and/or animal subjects. Artisan Technology Group and its employees are not liable for accidents or injuries that may occur with use or improper use of this unit. This instrument should be handled and used only by a person qualified and familiar with its use. If purchased, this disclaimer will need to be signed.

This System Includes:
• Primary Control Unit, Part Number: M1273-3101

Vessel Configuration:
• 14.0L Glass Vessel, Part Number: M1273-9918
• Heat Blanket, Part Number: R11282A1
• Magmotor C32-E-450X Agitation Motor, Part Number: 500320061
• Headplate
• Cooling Coil
• Sparger, Part Number: M1273-5006
• Partial Vessel Stand
• Lifting Handle
• Bearing Housing
• Clamping Ring

Accessories:
• 500mL Addition Bottle With Two-Way Tube, Part Number: M1273-9990
• Probe RTD Assembly, All Vessels, Part Number: M2173-8019-E
• Tri-Port Assembly
• (3) Addition Bottle Holders
• (3) Sample Bottle Holders
• (4) Two-Way Addition Bottle Sample Tubes
• (2) 10L Sample Tubes, Part Number: M1273-9193
• 1/4 Inch x 1/4 Inch Nylon Hose, Part Number: P0245-0080
• Level Probe Assembly, Part Number: M1273-5036
• 5L/10L Level Probe Kit, Part Number: M1273-9960
• (2) Adjustable Adapter Assemblies, Part Number: M1273-5040
• Adapter Tube Assembly, Part Number: M1273-5042
• 1/4 Inch to 5/16 Inch Nylon Clamp Hose, Part Number: P0160-4701
• (2) Probe Sleeves, Part Number: M1273-9147
• (2) 1-1/2 Inch Black Vinyl Caps, Part Number: P0280-2760
• 6.35mm Port and Tube Adapter, Part Number: M1273-9403
• Restrictor Pad, Part Number: M1273-9491
• (2) 25/64 15/32 Inch Nylon Clamp Hoses, Part Number: P0160-4700
• (2) Molded Plastic Cap Closers, Part Number: P0720-5317
• 2-108 EPRP O-Ring, Part Number: P0280-5882
• (9) 2-013 EPRP O-Rings, Part Number: P0280-5352
• (5) 2-201 EPR O-Rings, Part Number: P0280-6662
• (4) 0.040 Inch / 0.266 Inch Washers, Part Number: P0100-9860
• (8) 0.050 Inch / 0.505 Inch Washers, Part Number: P0100-9870
• (8) 7mm x 13mm Rubber Stoppers, Part Number: P0280-2690
• 1/8 Inch Silicone Tubing, Part Number: P0740-2400
• (2) Power Plugs
• Angled Tube
     • Angled Tip, Inside Diameter: Approximately 4.4 mm
     • Angled Tip, Length: Approximately 4 in.
     • Straight Tip, Outside Diameter: Approximately 6.2 mm
     • Straight Tip, Length: Approximately 16 in.
• Straight Tube
     • Inside Diameter: Approximately 7.5 mm
     • Length: Approximately 19 11/16 in.
• (2) Straight Tubes
     • Inside Diameter: Approximately 11.03 mm
     • Length: Approximately 20 in.
• 12mm to 6.35mm Tube Adapter, Part Number: M1273-5056
• (6) 12mm Plugs, Part Number: M1273-9406
• (5) 12mm to 4.76mm Tube Adapters, Part Number: M1273-5055
• (5) 6.35mm Plugs, Part Number: M1273-9405
• 6.35mm to 6.35mm Tube Adapter, Part Number: M1273-5054
• 19mm Plug, Part Number: M1273-9407
• 5 Feet DB8 Serial Cable
• (5) 1 1/2 Feet DB9 to DB9 Cables
• BNC-Auxiliary to Probe Adapter
• 250V European Power Plug
• 100-240V Power Supply, Part Number: PS-2433APL10
• (8) Caps for Adapter of Various Sizes
• (6) M8x1.25 Adapters
• Approximately 7.3 mm to Approximately 17.22 mm Adapter
• Approximately 12.5 mm to Approximately 16.7 mm Adapter
• M10x1.25 to Approximately 12 mm Adapter
• Level/Foam Cable, Part Number: M1273-8020
• Tube Adapter Assembly, Part Number: M1273-5042

Input Voltage: 85-265 VAC

If you would like to purchase an individual component of this unit, please contact Artisan Technology Group Sales for pricing and availability.

Artisan Technology Group is not selling this item to be used on human and/or animal subjects. Artisan Technology Group and its employees are not liable for accidents or injuries that may occur with use or improper use of this unit. This instrument should be handled and used only by a person qualified and familiar with its use. If purchased, this disclaimer will need to be signed.

This System Includes:
• Power Control, Part Number: M1273-3100
• Primary Control Unit, Part Number: M1273-3101
• pH/DO Controller, Part Number: M1273-3102
• Foam/Levels Controller, Part Number: M1273-3103
• Gas Mix Controller, Part Number: M1273-3104
• Pump Module, Part Number: M1273-3106
• Mass Flow Controller, Part Number: M1273-3109

Vessel Configuration:
• 14.0L Glass Vessel, Part Number: M1273-9918
• Heat Blanket, Part Number: M1230-9933
• Agitation Motor, Part Number: M1273-3125
• Baffle, Part Number: M1273-9265
• Exhaust, Part Number: M1273-9957
• Headplate
• Cooling Coil
• Sparger, Part Number: M1273-5006
• Vessel Stand
• Lifting Handle
• Bearing Housing
• Clamping Ring

Accessories:
• 500mL Addition Bottle With Two-Way Tube, Part Number: M1273-9990
• Probe RTD Assembly, All Vessels, Part Number: M2173-8019-E
• Tri-Port Assembly
• (3) Addition Bottle Holders
• (3) Sample Bottle Holders
• (3) Two-Way Addition Bottle Sample Tubes
• (2) 10L Sample Tubes, Part Number: M1273-9193
• 1/4 Inch x 1/4 Inch Nylon Hose, Part Number: P0245-0080
• Level Probe Assembly, Part Number: M1273-5036
• (2) 5L/10L Level Probe Kits, Part Number: M1273-9960
• (2) Adjustable Adapter Assemblies, Part Number: M1273-5040
• Adapter Tube Assembly, Part Number: M1273-5042
• 1/4 Inch to 5/16 Inch Nylon Clamp Hose, Part Number: P0160-4701
• (2) Probe Shelves, Part Number: M1273-9147
• (2) 1-1/2 Inch Black Vinyl Caps, Part Number: P0280-2760
• 6.35mm Port and Tube Adapter, Part Number: M1273-9403
• Restrictor Pad, Part Number: M1273-9491
• (2) 25/64 15/32 Inch Nylon Clamp Hoses, Part Number: P0160-4700
• (2) Molded Plastic Cap Closers, Part Number: P0720-5317
• 2-108 EPRP O-Ring, Part Number: P0280-5882
• (9) 2-013 EPRP O-Rings, Part Number: P0280-5352
• (5) 2-201 EPR O-Rings, Part Number: P0280-6662
• (4) 0.040 Inch / 0.266 Inch Washers, Part Number: P0100-9860
• (8) 0.050 Inch / 0.505 Inch Washers, Part Number: P0100-9870
• (8) 7mm x 13mm Rubber Stoppers, Part Number: P0280-2690
• 1/8 Inch Silicone Tubing, Part Number: P0740-2400
• 8mm to 6.35mm Adapter
• (2) Power Plugs
• (3) Harvest Tubes
• 12mm to 6.35mm Tube Adapter, Part Number: M1273-5056
• 6.35mm to 6.35mm Adapter
• (6) 12mm Plugs, Part Number: M1273-9406
• (5) 12mm to 4.76mm Tube Adapters, Part Number: M1273-5055
• (3) Probe Tubes
• (5) 6.35mm Plugs, Part Number: M1273-9405
• 6.35mm to 6.35mm Tube Adapter, Part Number: M1273-5054
• 19mm Plug, Part Number: M1273-9407
• 5 Feet DB8 Serial Cable
• (5) 1 1/2 Feet DB9 to DB9 Cables
• BNC-Auxiliary to Probe Adapter
• 250V European Power Plug
• 100-240V Power Supply, Part Number: PS-2433APL10
• 8mm to 6.35mm Adapter
• (8) Caps for Adapter of Various Sizes

View Photo of the Vessel Configuration
View Photo of the System Configuration
View Photo of the First Set of Accessories
View Photo of the Second Set of Accessories

Input Voltage: 100-250 VAC

If you would like to purchase an individual component of this unit, please contact Artisan Technology Group Sales for pricing and availability.

Artisan Technology Group is not selling this item to be used on human and/or animal subjects. Artisan Technology Group and its employees are not liable for accidents or injuries that may occur with use or improper use of this unit. This instrument should be handled and used only by a person qualified and familiar with its use. If purchased, this disclaimer will need to be signed.

This System Includes:
• Power Control, Part Number: M1273-3100
• Primary Control Unit, Part Number: M1273-3101
• pH/DO Controller, Part Number: M1273-3102
• Foam/Levels Controller, Part Number: M1273-3103
• Gas Mix Controller, Part Number: M1273-3104
• Pump Module, Part Number: M1273-3106

Accessories:
• Probe, Part Number: 0405120008
• Mettler Toledo BNC Cable Assembly, Approximate Length: 40 in., Part Number: 410001000
• Mettler Toledo O2/45IN/NBS/Conn NBS Cable, Part Number: 412487031
• Automatic Switch SC8225B4V Solenoid Valve with Bracket
• SSA537 RO LPM Air Gauge with Bracket
• Power Control Power Cable, Approximate Length: 8 ft.
• (3) DB9 Male to DB9 Male Cables, Approximate Length: 18 in.
• DB9 Male to DB9 Male Cable, Approximate Length: 6 ft.

Input Voltage: 115/230 VAC

This New Brunswick Scientific BioFlo II Batch / Continuous Benchtop Fermentor is a parts unit and will be sold as-is without warranty. This is for the main system only and does not include any accessories.

If you would like to purchase an individual component of this unit, please contact Artisan Technology Group Sales for pricing and availability.

View Photo of interior of unit.

Input Voltage: 115 V