New & Used Ovens Products

Configuration:
• Electrical Ratings (50/60 Hz):
     • Volts: 120
     • Amps: 11.3
     • Watts: 1350
• Operating Temperature Range: 100-1200°C
• Control Option: Digital Single Set Point Control
• Opening Diameter: 2 Inches (52 mm)

This unit includes a Saunders Model 2255 Control Panel.

Configuration:
• Input Voltage: 105-130 VAC

This Despatch Industries LAC 1-38A-6 Laboratory Convection Oven is used and in excellent condition.

LAC 1-38A-6 Configuration:
• Recirculating Fan CFM: 300
• Max Temp: 260 C (500ºF)
• Heater Watts: 1600

Chamber Size W x D x H: 18.75 x 18 x 19 (in)
Input Voltage: 120V

View Photo of Oven Chamber

This Precision Scientific Thelco 130D Laboratory Oven is used and in excellent condition.

This Saunders Temperature Test Chamber is used and in excellent condition. This unit includes a Saunders Model 2250 Control Panel.

Input Voltage: 110 VAC Only

This unit has a large dent on it's side next to the I/O array (see photos), it's shipping damage and is cosmetic.

Configuration:
• Temperature Range: Approximately -70 to +150 Degrees C
• Humidity Range: Approximately 10% to 98% RH
• Chamber Volume: 225 L or 8 Cubic Feet
• Active Cooling Type: Water
• Temperature Control: SCP-220 Controller
• Paperless Recorder to Floppy Disk: Yokogawa DX106-1-2
• Input Voltage: 115 VAC
Includes
• (1) Wire Shelf with Rails
• (2) 4 Inch Flexible Plugs for Standard Port

Includes:
• Phino Power Cord: Part Number: PHS-301; Approximately 9.5 ft.
• Dwyer Gauge SCFH Air 1-20

Input Voltage: 110-120 V

Part Number: 9100902

This Delta Design 9023 Environmental Test Chamber is used and in good condition. It has been tested and is fully operational.

This unit has a custom hinged plexiglass door w/access port.

Note: Requires liquid CO2 to cool from ambient.

This Thermo / Precision Scientific C1483 Incubator Gravity Oven is used and in excellent condition. This unit comes with one wire rack shelf. This unit was initially made for Curtin Matheson Scientific.

Input Voltage: 120 V
Input Current: 1.3 A
Input Frequency: 50/60 Hz
Max Temp: 75C

External Dimensions: 22" L X 22" W X 38.7" H (55.88cm L X 55.88cm W X 98.298cm H)
Internal Dimensions: 18" L X 17" W X 27.75" H (45.72cm L X 43.18cm W X 70.485cm H)

This Thermo / Lindberg / Blue M STF54454C 1700°C High Temperature Tube Furnaces is new from surplus stock. This unit is in excellent condition as shown in the photos. The controller is not included and sold separately. Several controllers are compatible with this furnace: CC59256PCOMC, CC59256PBCOMC, CC59256PCOM2KT, CC59256PBCOM2CKTC. Please contact manufacturer for pricing and availability of the Control Console and Remote Control Software.

This Item includes:
• STF54454C Tube Furnace
• 13 - 3” Diameter Ceramic Sleeve
• 4 - 2” Diameter Ceramic Sleeve
• 2 - 3” Diameter Ceramic Vestibules
• STF54434C Operating and Maintenance Manual (Applies to STF54454C)

Outside Dimensions (L x W x H) | 34" x 17" x 19"
Inside Chamber Dimensions | 3" Vestibule I.D. x 19" Long

View Photo of 3” Diameter Ceramic Sleeve
View Photo of 3” Diameter Ceramic Vestibules
View Photo of Ceramic Sleeves