Items/Page
Showing 1-100 of 160 Results
Aerotech BA30-320-S Servo Amplifier
This Aerotech BA30-320-S Servo Amplifier is used and in excellent condition.

Configuration:

• Output Current, Peak: 15 A Cont.
• Operating Bus Voltage: 30 A Peak Servo Amplifier/Power Supply
• Internal Shunt Power Resister: Yes

Part Number: BA30-320-S

This unit is also known as the Varian 00-873442-03.

Configuration:
• Stall Torque, Continuous: 1.48 (210) N-m (oz-in)

• Peak Torque: 7.1 (1000) N-m (oz-in)
• Max. Speed: 3,000 RPM
• Rated Power: 220 (0.3) W (hp)

Part Number: 1210-01-1601-03-01

This Aerotech U100M Unidex 100 Motion Controller is used and in excellent condition.

Connections:

• Receptacle for Screw-Type Connector
• COM (Female DB-9)
• I/O (Female DB-37)
• ENC LMT (Female DB-25)
• AUX. ENC. (Female DB-9)
• EXT. A (IEE488 Interface)

Input Voltage: 115 VAC

Part Number: U100M-A-160-F.8/IE488, U100M-A-160-F0.8/IE488
• U100M: Sub-panel mount package with microstepping drive installed

This Aerotech BA20-160 Servo Amplifier is used and in excellent condition.

Configuration:

• Standard Voltage: ±160
• Peak Output Current: 20
• Continuous Output Current (Peak): 10A

Part Number: BA20-160

Configuration:
• Peak Output Current: 10 A

• Continuous Output Current: 5 A

Part Number: SOLOISTMP10/ES15755-10, 734148

This Aerotech BAS20-160 SineDrive Servo Amplifier is used and in excellent condition.

Configuration:

• Standard Voltage: ±160
• Peak Output Current: 20
• Continuous Output Current (Peak): 10A

Part Number: BAS20-160, BAI/BAS20

Aerotech AS32020C 3U Height Brushless Motor Driver
Configuration:
• Control Type: Brushless
• Output Type; PWM
• Peak Current: 20 A

• Fuse Number: 4.5

Configuration:
• Peak Output Current: 10 A
• Continuous Output Current: 5 A

This Aerotech U100Z Unidex 100 Motion Controller is used and in excellent condition.

Connections:
• Receptacle for Screw-Type Connector

• COM (Female DB-9)
• I/O (Female DB-37)
• ENC LMT (Female DB-25)
• AUX. ENC. (Female DB-9)
• EXT. A (Dual 50-Pin)

Input Voltage: 115 VAC

Part Number(s): U100Z-A-160-F7, U100Z-A-160-F7.5, U100Z-A-160-F2.5, U100Z-A-160-F4, U100Z-A-160-F7.5/DISP-2, ES12907, ES13871, ES13871-1


• U100Z: Sub-panel mount package with brushless servo drive installed
• The difference in part numbers (-F7.5, -F2.5, etc.) reflects the different fuse sizes installed in the unit.

Input Voltage: 115 VAC

Part Number: U11R-2-A-40/X2-DSL4020-20A4-F5/I488

DM4005 Stepping Motor Drive Module Installed:
The DM4005 is designed to accurately control a
standard unipolar stepping motor by utilizing a unique sin/cos translator control.

Connections:

• XJ1
• YJ1
• J13: X ENC/LMT (Female DB-25)
• J14: Y ENC/LMT (Female DB-25)
• J10: X AUX. CONTROL (Male DA-15)
• J11: Y AUX. CONTROL (Male DA-15)
• J19: U ENC/LMT (Female DB-25)
• J20: V ENC/LMT (Female DB-25)
• J17: U AUX. CONTROL (Male DA-15)
• J18: V AUX. CONTROL (Male DA-15)
• J5: INPUT/OUTPUT (Female DA-15)
• J3: JOYSTICK (Female DA-15)
• J2: RS-232C
• J6: OPTO-INTERFACE
• J15: IEEE 488
View Photo of the connections on the back of this unit

Configuration:
• Output Voltage (Brushless): 40 to 320 VDC
• Input Voltage: 28 to 240 VAC

• Peak Output Current: 20 A(peak)
• Continuous Output Current: 10 A(peak)

Part Number: BAI20-320

This Aerotech BA30-320 Servo Amplifier is used and in excellent condition.

Configuration:

• Output Current, Peak: 15 A Cont.
• Operating Bus Voltage: 30 A Peak Servo Amplifier/Power Supply
• Internal Shunt Power Resister: No

Part Number: BA30-320

This Aerotech U100i-A Unidex 100 Multitasking Motion Controller is used and in excellent condition.

Configuration:
• Line Cord Option: A (100-115 VAC Input Plug USA)

• Stand-Alone Indexer
• COM (Female DB-9)
• I/O (Female DB-37)
• ENC LMT (Female DB-25)
• Aux ENC (Female DB-9)

Aerotech DR500R-A-40-40 Drive Chassis
This unit does not have any drives installed.

DR500R-A-40-40:
• Rackmount Chassis
• 115 VAC
• Vbus1: 40 VDC (175 W Power Supply)

• Vbus2: 40 VDC (175 W Power Supply)


Configuration:
• Peak Output Current: 20 A
• Continuous Output Current: 10 A

• -MXH: Programmable encoder multiplier up to x2,048, supports PSO (laser firing) and encoder quadrature output
Configuration:
• Peak Output Current: 20 A
• Continuous Output Current: 10 A

• -IO: Expansion board with 16 opto-isolated inputs (sinking or sourcing); 16 outputs (sinking or sourcing); 3 16-bit analog inputs; 3 16-bit analog outputs; and brake relay
• -MXH: Programmable encoder multiplier up to x2,048, supports PSO (laser firing) and encoder quadrature output

Configuration:
• Memory: 32 MB DRAM

Part Numbers: 690D1502, ESP00790
This Aerotech U100S Unidex 100 Motion Controller is used and in excellent condition.

Connections:
• Screw-Type Connector
• COM (Female DB-9)

• I/O (Female DB-37)
• ENC LMT (Female DB-25)
• AUX. ENC. (Female DB-9)

Input Voltage: 115 VAC

Part Number: U100S-A-40-F4, U100S-A-80-F5
• U100S: Sub-panel mount package with DC servo drive installed

This unit does not have the IEEE 488 / GPIB interface installed.

U511S-A-30-40

• (U511S): Desktop Unidex 511 with Integral Power Supply and Interconnection Panel for all Controller Signals
• (A): 115 VAC Input Power
• (30): 30 VDC Bus Voltage for Axis 1 and 2
• (40): 40 VDC Bus Voltage for Axis 3 and 4

Installed Amplifiers:
(Axis One) AS3005LC: 30 V Brushless Motor Driver
(Axis Three) DS16020: 160 V DC Servomotor Driver


This Aerotech U100Z Unidex 100 Motion Controller is used and in excellent condition.

Connections:
• Receptacle for Screw-Type Connector

• COM (Female DB-9)
• I/O (Female DB-37)
• ENC LMT (Female DB-25)
• AUX. ENC. (Female DB-9)
• EXT. A (Dual 50-Pin)

Input Voltage: 115 VAC

Part Number(s): U100Z-A-160-F7, U100Z-A-160-F7.5/INT, 54033B/12
• U100Z: Sub-panel mount package with brushless servo drive installed

Aerotech DR500-R-A-80-80 4-Axis Drive Chassis
This unit does not have any drives installed.

DR500-R-A-80-80:
• Rackmount Chassis
• 115 VAC

This Aerotech U100S Unidex 100 Motion Controller is used and in excellent condition.

Connections:
• Screw-Type Connector
• COM (Female DB-9)

• I/O (Female DB-37)
• ENC LMT (Female DB-25)
• AUX. ENC. (Female DB-9)

Input Voltage: 115 VAC

Part Number: U100S-A-40-F5
Alternate Part Number: U100S-A-40-F4/ES13518-2, U100S-80-A-F5/ES106
• U100S: Sub-panel mount package with DC servo drive installed

This Aerotech U100M Unidex 100 Motion Controller is used and in excellent condition.

Connections:

• Screw-Type Connector
• 50-Pin Connector
• COM (Female DB-9)
• I/O (Female DB-37)
• ENC LMT (Female DB-25)
• AUX. ENC. (Female DB-9)

Input Voltage: 115 VAC

Part Number: U100M-A-160-F3.5/IE488/DISP
• U100M: Sub-panel mount package with microstepping drive installed

This U100M Unidex 100 Motion Controller is used and in excellent condition.

Connections:
• Receptacle for Screw-Type Connector
• COM (Female DB-9)

• I/O (Female DB-37)
• ENC LMT (Female DB-25)
• AUX. ENC. (Female DB-9)
• EXT. A (Female 24-Pin)
• IEE488 Interface
• EXT. B (Dual 50-pin)

Input Voltage: 115-Volts

Part Number: U100M-A-160-F3.5/IE488/DISP
• U100M: Sub-panel mount package with microstepping drive installed

Aerotech DR500 4-Axis Drive Chassis
DR500R-A-80-80:
• Rackmount Chassis
• 115 VAC
• (4) AS32020C AC Brushless Drive Module Installed

AS32020C:

• Control Type: Brushless
• Output Type: PWM
• Peak Current: 20 A

Aerotech DR500-A-80-80 4-Axis Drive Chassis
DR500-A-80-80:
• Rackmount Chassis
• 115 VAC
• (4) AS32020C AC Brushless Drive Module Installed

AS32020C:

• Control Type: Brushless
• Output Type: PWM
• Peak Current: 20 A

Aerotech DR500R-A-160-160 3-Axis Drive Chassis
DR500R-A-160-160:
• Rackmount Chassis
• 115 VAC
• Vbus1: 160 VDC (325 W Power Supply)
• Vbus2: 160 VDC (325 W Power Supply)

• (3) AS32020C AC Brushless Drive Module Installed

AS32020-4.5:
• Control Type: Brushless
• Output Type: PWM
• Peak Current: 20 A
• Fuse Number: 4.5

This Aerotech U100M Unidex 100 Motion Controller is used and in excellent condition.

Connections:

• Receptacle for Screw-Type Connector
• COM (Female DB-9)
• I/O (Female DB-37)
• ENC LMT (Female DB-25)
• AUX. ENC. (Female DB-9)
• EXT. A (Dual 50-Pin)

Input Voltage: 115 VAC

Part Number: U100M-A-F.5/THM
• U100M: Sub-panel mount package with microstepping drive installed

This Aerotech U100Z Unidex 100 Motion Controller is used and in excellent condition.

Connections:
• Receptacle for Screw-Type Connector

• COM (Female DB-9)
• I/O (Female DB-37)
• ENC LMT (Female DB-25)
• AUX. ENC. (Female DB-9)
• EXT. A (IEEE-488)

Input Voltage: 115 VAC

Part Number(s): U100Z-A-160-F1.8/IEEE488
• U100Z: Sub-panel mount package with brushless servo drive installed

Configuration:
• Size: NEMA23
• Connectors: Integral Cable w/D25 Fbk and 4D Mtr

• Feedback: 1000 Lines/Rev TTL Incremental Encoder w/Hall Tracks
Configuration:
• Peak Output Current: 20 A
• Continuous Output Current: 10 A

• -IO: Expansion Board with 16 opto-isolated input (sinking or sourcing); 16 outputs (sinking or sourcing); 12-bit analog input; 16-bit analog output; brake relay

This Aerotech BA30-320/ES13250-2 Servo Amplifier is used and in excellent condition.

Configuration:

• Output Current, Peak: 15 A Cont.
• Operating Bus Voltage: 30 A Peak Servo Amplifier/Power Supply
• Internal Shunt Power Resister: Yes

Part Number: BA30-320/ES13250-2, 121242

This Aerotech BAL10-40-A Servo Amplifier is used and in excellent condition.

Configuration:

• Standard Voltage: ±40
• Peak Output Current: 10A
• Continuous Output Current (Peak): 5A

Part Number: BAL10-40-A

This Aerotech U100S Unidex 100 Motion Controller is used and in excellent condition.

Connections:
• Screw-Type Connector
• COM (Female DB-9)

• I/O (Female DB-37)
• ENC LMT (Female DB-25)
• AUX. ENC. (Female DB-9)

Input Voltage: 115 VAC

Part Number: U100S-A-80-F6
• U100S: Sub-panel mount package with DC servo drive installed

Configuration:
• Peak Output Current: 10 A
• Continuous Output Current: 5 A
• -A: 115 VAC Input

• -MXH: Programmable encoder multiplier up to x2,048, supports single/dual-axis PSO and real-time encoder quadrature output
• -AUXPWR: Auxiliary 85-240 VAC input to power logic circuitry

This Aerotech U100M Unidex 100 Motion Controller is used and in excellent condition.

Connections:

• Screw-Type Connect
• COM (Female DB-9)
• I/O (Female DB-37)
• ENC LMT (Female DB-25)
• AUX. ENC. (Female DB-9)

Input Voltage: 115 VAC

Part Number: U100M-A-160-F3/ES13331
• U100M: Sub-panel mount package with microstepping drive installed

Input Voltage: 115 VAC

Part Number: U11M-2-A/X2-DM1501-20

DM1501 Stepping Motor Drive Module Installed:
The DM1501 is designed to accurately control a standard
unipolar stepping motor by utilizing a unique sin/cos translator control.

Connections:

• XJ1
• YJ1
• J13: X LMT/MARKER (Female DB-25)
• J14: Y LMT/MARKER (Female DB-25)
• J5: INPUT/OUTPUT (Female DA-15)
• J3: JOYSTICK (Female DA-15)
• J2: RS-232C
• J6: OPTO-INTERFACE

View Photo of the connections on the back of this unit

Input Voltage: 115 VAC

Part Number: U11R-2-A/X2-DM4005-20-F5

DM4005 Stepping Motor Drive Module Installed:
The DM4005 is designed to accurately control a standard
unipolar stepping motor by utilizing a unique sin/cos translator control.

Connections:

• XJ1
• YJ1
• J13: X ENC/LMT (Female DB-25)
• J14: Y ENC/LMT (Female DB-25)
• J10: X AUX. CONTROL (Male DA-15)
• J11: Y AUX. CONTROL (Male DA-15)
• J19: U ENC/LMT (Female DB-25)
• J20: V ENC/LMT (Female DB-25)
• J17: U AUX. CONTROL (Male DA-15)
• J18: V AUX. CONTROL (Male DA-15)
• J5: INPUT/OUTPUT (Female DA-15)
• J3: JOYSTICK (Female DA-15)
• J2: RS-232C
• J6: OPTO-INTERFACE

View Photo of the connections on the back of this unit

Configuration:
• Peak Output Current: 10 A
• Continuous Output Current: 5 A
• Maximum Motor Supply Input: 240 VAC

• Control Supply Input: 85 - 240 VAC
• MXU: Programmable Encoder Multiplier up to x4096; No Real-Time Encoder Quadrature Output
• Power: Auxiliary


Input Voltage: 230 VAC

Part Number: U11R-4-B/X3-DM4005-20-F5/DM6006-4-F5.5

DM6006-4-F5.5 Stepping Motor Drive Module Installed:
The DM4001 is designed to accurately
control a standard unipolar stepping motor by utilizing a unique sin/cos translator control.

Connections:

• UJ1: Twist-Lock Connector
• VJ1: Twist-Lock Connector
• XJ1: Twist-Lock Connector
• YJ1: Twist-Lock Connector
• J13: X ENC/LMT (Female DB-25)
• J14: Y ENC/LMT (Female DB-25)
• J10: X AUX. CONTROL (Male DA-15)
• J11: Y AUX. CONTROL (Male DA-15)
• J19: U ENC/LMT (Female DB-25)
• J20: V ENC/LMT (Female DB-25)
• J17: U AUX. CONTROL (Male DA-15)
• J18: V AUX. CONTROL (Male DA-15)
• J5: INPUT/OUTPUT (Female DA-15)
• J3: JOYSTICK (Female DA-15)
• J2: RS-232C
• J6: OPTO-INTERFACE

View Photo of the connections on the back of this unit

Connections:
• Receptacle for Screw-Type Connector
• COM (Female DB-9)
• I/O (Female DB-37)

• ENC LMT (Female DB-25)
• AUX. ENC. (Female DB-9)
• EXT. A (IEE488 Interface)

Input Voltage: 115 VAC

Part Number: U100M-A-40-F1/IE488/ES12728
• U100M: Sub-panel mount package with microstepping drive installed

This unit has cosmetic wear from being stored outside the manufacturer's packaging; however, this does not affect its ability to function properly.

Configuration:
• Peak Output Current: 30 A
• Continuous Output Current: 10 A
• Continuous Internal Shunt Resistor: 40 W

Aerotech AWT 200/300 Video Microscope
This Aerotech AWT 200 Video Microscope is used and in excellent condition.

Accessories Include:
• Ruggedized Case

• AWT 200 65mm Short Barrel
• AWT 300 220mm Long Barrel
• Lens Extender
• Monitor M938-1A
• Camera Handle
• Battery Pack
• Universal Tip, Patchcord Tip, and Biconic Tip
• Audio and Video Connector
• USB VideoBus, Software and User Guide
• AWT-Brkout Adapter
• Power Adapter

Input Voltage: 100-240V

This stage has a Parker / Compumotor QM-57-83 drive attached to it.

Configuration:
• Total Travel: 300 mm (12 in)

• Ball Screw Accuracy (Standard): +2.0, -12.0 µm (+80, -480 µin)
• Straightness and Flatness (HALSF): ±3.0 µm (±120 µin)
• Straightness and Flatness (Standard): ±5.0 µm (±200 µin)
• Pitch and Yaw: 14 arc sec

QM-57-83 Configuration:
• Frame Size: 23
• Rotor Inertia: 1.10 oz-in2
• Bearings Thrust Load: 25 lb
• Bearings Radial Load: 15 lb
• End Play: 0.005 in
• Radial Play: 0.0008 in

Configuration:
• Peak Output Current: 10-150 A
• Continuous Output Current: 5-75 A
• Power Stage Option: 100 W Internal Shunt Resistor Network
U511S-A-160LT-160LT / X4-AS32020C-F4 / U511 / IEEE
• (U511S): Desktop Unidex 511 with Integral Power Supply and Interconnection Panel for all Controller Signals
• (A): 115 VAC Input Power
• (160LT): 160 VDC Bus Voltage for Axis 1 and 2
• (160LT): 160 VDC Bus Voltage for Axis 3 and 4
• (U511): UNIDEX 511 Software
• (IEEE): IEEE-488 Communications Interface

Installed Amplifiers:
(Axis One - Four) AS3005LC: 30 V Brushless Motor Driver

Aerotech DR500R-4-A-80/X2 2-Axis Drive Chassis
DR500R-4-A-80/X2:
• Rackmount Chassis
• 115 VAC
• Vbus1: 80 VDC (325 W Power Supply)
• Vbus2: 80 VDC (325 W Power Supply)

• (2) DS16020 DC Servomotor Driver Modules Installed

DS16020:
• Control Type: Servo
• Output Type: PWM
• Peak Current: 20 A
• Fuse Number: 4.5

Input Voltage: 115 VAC

Part Number: U11R-2-A-40/X2-DAV4008-20-F1/I488

DM4005 Stepping Motor Drive Module Installed:
The DM4005 is designed to accurately control a
standard unipolar stepping motor by utilizing a unique sin/cos translator control.

Connections:

• XJ1: Twist-Lock Connector
• YJ1: Twist-Lock Connector
• J13: X ENC/LMT (Female DB-25)
• J14: Y ENC/LMT (Female DB-25)
• J10: X AUX. CONTROL (Male DA-15)
• J11: Y AUX. CONTROL (Male DA-15)
• J19: U ENC/LMT (Female DB-25)
• J20: V ENC/LMT (Female DB-25)
• J17: U AUX. CONTROL (Male DA-15)
• J18: V AUX. CONTROL (Male DA-15)
• J5: INPUT/OUTPUT (Female DA-15)
• J3: JOYSTICK (Female DA-15)
• J2: RS-232C
• J6: OPTO-INTERFACE
• J15: IEEE-488

View Photo of the connections on the back of this unit

Configuration:
• Peak Output Current (1 sec): 30 A
• Continuous Output Current: 10 A

• Internal Shunt Resistor Option

Part Number: ENSEMBLECP30-S

This Aerotech DR300 2-Axis Drive Chassis is used and in excellent condition.

DR300R-A-30-30:
• Rackmount Chassis
• 115 VAC Input Only

• Vbus1: 30 VDC (100 W Power Supply)
• Vbus2: 30 VDC (100 W Power Supply)
• (2) AS3005LC AC Brushless Drive Modules Installed

AS3005LC:
• 30 V
• 1.5 A Cont.
• Peak Current: 5 A
• Linear
• 3U Height

AC Input Voltage: 115 VAC Only

This Aerotech DR300 4-Axis Drive Chassis is used and in excellent condition.

DR300R-A-40-40:
• Rackmount Chassis
• 115 VAC Input Only

• Vbus1: 40 VDC (175 W Power Supply)
• Vbus2: 40 VDC (325 W Power Supply)
• (4) AS32020C AC Brushless Drive Modules Installed

AS32020:
• Output Type; PWM
• Peak Current: 20 A

AC Input Voltage: 115 VAC Only

This Aerotech DR300 4-Axis Drive Chassis is used and in excellent condition.

DR300R-B-40-40:
• Rackmount Chassis
• 230 VAC Input Only

• Vbus1: 40 VDC (175 W Power Supply)
• Vbus2: 80 VDC (325 W Power Supply)
• Split Bus 1-2/3-4
• (4) AS32020C AC Brushless Drive Modules Installed

AS32020:
• Output Type; PWM
• Peak Current: 20 A

AC Input Voltage: 230 VAC Only

Aerotech DR500R-A-80/DS16020C-F5 4-Axis Drive Chassis
This unit does not have any drives installed.

DR500R-A-80:
• Rackmount Chassis
• 115 VAC

• Vbus1: 80 VDC (325 W Power Supply)
• Vbus2: 80 VDC (325 W Power Supply)

DS16020C-F5:
• Control Type: Servo
• Output Type: PWM
• Peak Current: 20 A
• Fuse Number: 4.5

Aerotech Unidex U511 PCB Controller Board
Configuration:
• Motorola DSP56002FC40 24-Bit Digital Signal Processor, 40MHz

• Intel i386 EX KU80386EX33 32-Bit Embedded Microprocessor, 33MHz
• 10MB SRAM
• 1MB Flash Memory

Aerotech Unidex U511 PCB Controller Board
Configuration:
• 64-Pin Female Connector on A1/B1-A32/B32
• 40-Pin Female Connector on C0/D0-C19/D19

• Motorola DSP56002FC40 24-Bit Digital Signal Processor, 40MHz
• Intel i386 EX KU80386EX33 32-Bit Embedded Microprocessor, 33MHz
• 4MB SRAM
• 1MB Flash Memory

The full model number of this unit is unknown

Part Number: EFN01009
Configuration:
• Peak Output Current: 10 A
• Continuous Output Current: 5 A
• I/O Expansion Board Option
This Aerotech Unidex U14R-2-A-40 Motion Controller is used and in excellent condition. This unit does not have the J15 IEEE-488 connection.

Connections:
• XJ1

• YJ1
• J13: X ENC/LMT (Female DB-25)
• J14: Y ENC/LMT (Female DB-25)
• J10: X AUX. CONTROL (Male DA-15)
• J11: Y AUX. CONTROL (Male DA-15)
• J19: U ENC/LMT (Female DB-25)
• J20: V ENC/LMT (Female DB-25)
• J17: U AUX. CONTROL (Male DA-15)
• J18: V AUX. CONTROL (Male DA-15)
• J25: DIO/HSB (Female DA-15)
• J5: INPUT/OUTPUT (Female DA-15)
• J3: JOYSTICK (Female DA-15)
• J2: RS-232C
• J6: OPTO-INTERFACE


10-40-MXU Configuration:
• Output Current": 10-40

• Control Option: MXU, Programmable Encoder Multiplier up to x1024; No Real-Time Output
This Aerotech DR300 1-Axis Drive Chassis is used and in excellent condition.

DR300R-A-30-30:
• Rackmount Chassis
• 115 VAC Input Only

• Vbus1: 30 VDC (100 W Power Supply)
• Vbus2: 30 VDC (100 W Power Supply)
• (1) AS3005LC AC Brushless Drive Module Installed

AS3005LC:
• 30 V
• 1.5 A Cont.
• Peak Current: 5 A
• Linear
• 3U Height

AC Input Voltage: 115 VAC Only

Input Voltage: 110 VAC

Part Number: U12R-4-B-40/X3-DSL4020-20-F5/DM4005-20-F5

DM4005 Stepping Motor Drive Module Installed:
The DM4005 is designed to accurately
control a standard unipolar stepping motor by utilizing a unique sin/cos translator control.

Connections:

• UJ1 DC: 14-Pin Plastic Style Power Connector
• VJ1 DC: 14-Pin Plastic Style Power Connector
• XJ1 DC: 14-Pin Plastic Style Power Connector
• YJ1 DC: 14-Pin Plastic Style Power Connector
• J13: X ENC/LMT (Female DB-25)
• J14: Y ENC/LMT (Female DB-25)
• J10: X AUX. CONTROL (Male DB-15)
• J11: Y AUX. CONTROL (Male DB-15)
• J19: U ENC/LMT (Female DB-25)
• J20: V ENC/LMT (Female DB-25)
• J17: U AUX. CONTROL (Male DB-15)
• J18: V AUX. CONTROL (Male DB-15)
• J25: DIO/HSB (Female DB-15)
• J5: INPUT/OUTPUT (Female DB-15)
• J3: JOYSTICK (Female DB-15)
• J2: RS-232C
• J6: OPTO-INTERFACE

This Aerotech DR300 3-Axis Drive Chassis is used and in excellent condition.

DR300R-A-30-30:
• Rackmount Chassis
• 115 VAC Input Only

• Vbus1: 30 VDC (100 W Power Supply)
• Vbus2: 30 VDC (100 W Power Supply)
• (3) AS3005LC AC Brushless Drive Modules Installed

AS3005LC:
• 30 V
• 1.5 A Cont.
• Peak Current: 5 A
• Linear
• 3U Height

AC Input Voltage: 115 VAC Only

This Aerotech DR300 3-Axis Drive Chassis is used and in excellent condition.

DR300R-A-40-40:
• Rackmount Chassis
• 115 VAC Input Only

• Vbus1: 40 VDC (175 W Power Supply)
• Vbus2: 40 VDC (325 W Power Supply)
• (3) AS32020C AC Brushless Drive Modules Installed

AS32020:
• Output Type; PWM
• Peak Current: 20 A

AC Input Voltage: 115 VAC Only

Configuration:
• Peak Output Current: 10 A
• Continuous Output Current: 5 A

• J201 Connector

Part Number: SoloistMP10/ES15755-11

This Aerotech U100Z Unidex 100 Motion Controller is used and in excellent condition.

Connections:
• Receptacle for Screw-Type Connector

• COM (Female DB-9)
• I/O (Female DB-37)
• ENC LMT (Female DB-25)
• AUX. ENC. (Female DB-9)
• EXT. A (Dual 50-Pin)

Input Voltage: 230 VAC

Part Number(s): U100Z-A-160-F7, U100Z-A-160-F7.5/INT, ES12907
• U100Z: Sub-panel mount package with brushless servo drive installed

This Aerotech U100Z Unidex 100 Motion Controller is used and in excellent condition.

Connections:
• Receptacle for Screw-Type Connector

• COM (Female DB-9)
• I/O (Female DB-37)
• ENC LMT (Female DB-25)
• AUX. ENC. (Female DB-9)
• EXT. A (Dual 50-Pin)
• EXT. B (Female 25-Pin)

Input Voltage: 115 VAC

Part Number(s): U100Z-A-160-F7, U100Z-A-160-F7, ES13870
• U100Z: Sub-panel mount package with brushless servo drive installed

Input Voltage: 115 VAC

Part Number: U11S-4-A/X3-DM4001-20-F1/JP4D

DM4001 Stepping Motor Drive Module Installed:
The DM4001 is designed to accurately control a
standard unipolar stepping motor by utilizing a unique sin/cos translator control.

Connections:

• J13: X ENC/LMT (Female DB-25)
• J14: Y ENC/LMT (Female DB-25)
• J10: X AUX. CONTROL (Male DA-15)
• J11: Y AUX. CONTROL (Male DA-15)
• J19: U ENC/LMT (Female DB-25)
• J20: V ENC/LMT (Female DB-25)
• J17: U AUX. CONTROL (Male DA-15)
• J18: V AUX. CONTROL (Male DA-15)
• J5: INPUT/OUTPUT (Female DA-15)
• J3: JOYSTICK (Female DA-15)
• J2: RS-232C
• J6: OPTO-INTERFACE

View Photo of the connections on the back of this unit

Aerotech DS16020C Drive Rack Amplifier
Configuration:
• Control Type: Brush
• Output Type; PWM
• Peak Current: 20 A
Input Voltage: 115 VAC

Part Number: UNIDEX XI-1/6KB/RS232/DM4001-400/ACL DCL

DM4001 Stepping Motor Drive Module Installed:
The DM4001 is designed to accurately
control a standard unipolar stepping motor by utilizing a unique sin/cos translator control.

Connections:

• XJ1
• J13: X LMT/MARKER (Female DB-25)
• J14: Y LMT/MARKER (Female DB-25)
• J5: INPUT/OUTPUT (Female DA-15)
• J3: JOYSTICK (Female DA-15)
• J2: RS-232C

View Photo of the connections on the back of this unit

This Aerotech U1B-LM-A-40 Unidex 1 Motion Controller is used and in excellent condition.

Configuration:

• Low Power Panel/Desktop Mount
• Translater Part Number: DM4005
• Stepping Motor Part Number: 101SM
• Input Power: 115/230-240 V, 50/60 Hz, 1 A

This Aerotech U1C-SM-A-40 Unidex 1 Motion Controller is used and in excellent condition.

Configuration:

• Low Power Panel/Desktop Mount
• Translator Part Number: DM6006
• Stepping Motor Part Number: 300SM
• Input Power: 115/230-240 V, 50/60 Hz, 1 A

Input Voltage: 115 VAC

Part Number: U11M-2-A/X2-DM4001-40/JP4C

DM4001 Stepping Motor Drive Module Installed:
The DM4001 is designed to accurately control a standard
unipolar stepping motor by utilizing a unique sin/cos translator control.

Connections:

• XJ1
• YJ1
• J13: X LMT/MARKER (Female DB-25)
• J14: Y LMT/MARKER (Female DB-25)
• J5: INPUT/OUTPUT (Female DA-15)
• J3: JOYSTICK (Female DA-15)
• J2: RS-232C
• J6: OPTO-INTERFACE

Input Voltage: 230 VAC

Part Number: U11M-2-B/X2-DM4001-20-F1/ES11916

DM4001 Stepping Motor Drive Module Installed:
The DM4001 is designed to accurately control a
standard unipolar stepping motor by utilizing a unique sin/cos translator control.

Connections:

• XJ1
• YJ1
• J13: X LMT/MARKER (Female DB-25)
• J14: Y LMT/MARKER (Female DB-25)
• J5: INPUT/OUTPUT (Female DA-15)
• J3: JOYSTICK (Female DA-15)
• J2: RS-232C
• J6: OPTO-INTERFACE

Configuration:
• Peak Output Current: 20
• Continuous Output Current (Peak): 10

• MXH: Programmable Encoder Multiplier
• AUXPWR: Auxiliary 85-240 VAC Input to Power Logic Circuitry

Part Number: 20B-MXH-AWXPWR, NDRIVE20B-MXH-AWXPWR

Input Voltage: 230 VAC

Part Number: U11M-2-B/X2-DM4001-20-F1/JP4/ES12449

DM4001 Stepping Motor Drive Module Installed:
The DM4001 is designed to accurately control a
standard unipolar stepping motor by utilizing a unique sin/cos translator control.

Connections:

• XJ1
• YJ1
• J13: X LMT/MARKER (Female DB-25)
• J14: Y LMT/MARKER (Female DB-25)
• J5: INPUT/OUTPUT (Female DA-15)
• J3: JOYSTICK (Female DA-15)
• J2: RS-232C
• J6: OPTO-INTERFACE

This unit has no amplifiers installed.

Unidex U511S-A-30-30 / U511:

• (U511S): Desktop Unidex 511 with Integral Power Supply and Interconnection Panel for all Controller Signals
• (A): 115 VAC Input Power
• (30): 30 VDC Bus Voltage for Axis 1 and 2
• (30): 30 VDC Bus Voltage for Axis 3 and 4
• (U511): UNIDEX 511 Software


Input Voltage: 115 VAC

Part Number: U11R-XI-4R/6KB/OPI/RS232/ACL DCL/DM4005-4000-2M/D3001-400-2M

DM4005 and D3001 Stepping Motor Drive Module Installed:
The DM4005
is designed to accurately control a standard unipolar stepping motor by utilizing a unique sin/cos translator control. The The D3001 is designed to accurately control a standard 6 wire unipolar stepping motor

Connections:

• XJ1
• YJ1
• UJ1
• VJ1
• J13: X ENC/LMT (Female DB-25)
• J14: Y ENC/LMT (Female DB-25)
• J19: U ENC/LMT (Female DB-25)
• J20: V ENC/LMT (Female DB-25)
• J5: INPUT/OUTPUT (Female DA-15)
• J3: JOYSTICK (Female DA-15)
• J2: RS-232C
• J6: OPTO-INTERFACE

View Photo of the connections on the back of this unit

This Aerotech TEA Teach Pendant is used and in excellent condition. This unit does not include the 200-foot cable or RS-232/RS-422 converter.

Part Number: TEA
This Aerotech BM75 Brushless Rotary Motor is used and in excellent condition.

Configuration:
• Frame Size: NEMA 23

• Continuous Torque: 78.3 oz-in
• Motor Weight: 2.42 lbs

Input Voltage: 115 VAC

Part Number: U12S-2-A-60/X2-DSL8020-50.8L4-F2/JP4E/ES12808

Connections:

• XJ1 DC: 14-Pin Plastic Style Power Connector
• YJ1 DC: 14-Pin Plastic Style Power Connector
• J13: X ENC/LMT (Female DB-25)
• J14: Y ENC/LMT (Female DB-25)
• J10: X AUX. CONTROL (Male DB-15)
• J11: Y AUX. CONTROL (Male DB-15)
• J19: U ENC/LMT (Female DB-25)
• J20: V ENC/LMT (Female DB-25)
• J17: U AUX. CONTROL (Male DB-15)
• J18: V AUX. CONTROL (Male DB-15)
• J25: DIO/HSB (Female DB-15)
• J5: INPUT/OUTPUT (Female DB-15)
• J3: JOYSTICK (Female DB-15)
• J2: RS-232C
• J6: OPTO-INTERFACE


This Aerotech ATS50-25-8/4 Linear Positioning Stage is used and in excellent condition.

Configuration:

• Total Travel: 25 mm (1 in)
• English Bolt Hole and Mounting Patterns
• Low Profile Table Top
• Motor: ZSS 33-200-1 2-Phase Hybrid Stepper Motor with 8 Ft Integral Cable


Showing 1-100 of 160 Results
Contact Us
Fax:

(240) 376-1381