Items/Page
Showing 1-100 of 124 Results
This Anritsu J0617B FC Quick Release Optical Connector - Option 37 is used and in excellent condition.

This item is also known as Agilent P/N 1005-0999 and JDSU / Acterna BN 2150/00.51.

This Anritsu MN924A Optical Attenuator is used, and in excellent condition. Optical Interface: FC/PC.

Measured Insertion Loss: ≤ 3.6 dB
This Anritsu J1409A / J0618D ST Quick Release Optical Connector - Option 38 is used and in excellent condition.

This is also known as JDSU / Acterna BN 2150/00.32.

This Anritsu MW9040B Optical Time Domain Reflectometer is used and in excellent condition.

Configuration:
• OTDR Mainframe

Opt 01: GPIB Remote Interface
• No Plug-In Optical Modules Included

This Anritsu MG922A White Light Source is used, and in excellent condition. Optical interface: FC.
This Anritsu HFT-40 Digital Surface Thermometer is used, and in excellent condition.

It comes with the N-347E-01 Wand and a Soft Leather Case.
This Antritsu MD8470A Signal Tester is used and in excellent condition.

Configuration:

• MU847010A W-CDMA Signalling Unit Installed
• MU847020A GSM Signalling Unit Installed
• MU847090B ISDN Interface Installed

Software:

• MX847000A Platform Software Installed
• MX847010A W-CDMA/GSM Simulation Kit Installed
• MX847011A W-CDMA Ciphering Software Installed
• MX847090B ISDN Software Installed

Accessories:

• Keyboard and Mouse
• MX847010A-20 Support Service CD-ROM
• Windows XP Professional CD-ROM
• Anritsu V101-04299 USIM Card

This Anritsu MT8802A Radio Communication Analyzer is used and in excellent condition.

Software Installed Version
• MX880201A: CDMA Measurement Software

• MX880213A: IS-136A Measurement Software
• MX880215A: GSM Measurement Software
• MX880216A: PDC Measurement Software

Option MT8802A-07:
• Spectrum Analyzer

This Anritsu MD0625A 1.430 192kb/s Interface Unit is used, and in excellent condition. It is a plug-in module for the MD6420A Data Transmission Analyzer.
This Anritsu MN9672A 2x8 Optical Channel Selector is used, and in excellent condition. Includes front panel cover plate. Optical Interface: FC/PC.

Our Technician, using a JDS PS3, measured: <1.8 dB IL & <0.03 dB PDL for both channels

This Anritsu MS9715B WDM Tester is used, and in excellent condition. Optical Interface: FC/PC.

Click here for spectrum of (2) attenuated Agilent 81662A DFB sources viewed with this MS9715B.

This Anritsu MP1656A Portable STM-16 Analyzer is used, and in excellent condition.

Features:
• Optical Interface: FC/SPC

• Opt 01: 1550 nm Optical Output
• Opt 21: High Performance WDM Optical Receiver

Input Voltage: 120 VAC

Configuration:
Option 06:
PDH/SDH Jitter (Tx)/frequency offset

Option 07:
PDH/SDH Jitter (Rx)
Option 10:
Built-in CMI 156Mb/s (Specifications same as MP0105A Module)
MP0109A Module Installed:
1310 nm, 156M/622M Optical I/O Unit
• Optical Interface: FC/PC

This unit can Tx and Rx at these speeds: 2, 8, 34, 140, 155 and 622 Mb/s (MHz)

This Anritsu MG9638A Tunable Laser Source is used, and in excellent condition. Includes front cover face plate. Optical Interface: FC/PC. This particular unit has a programmable wavelength range of 1498.740 to 1581.293 nm.

Our Technician, using an Anritsu MS9710B OSA, measured:
• Sustained output power over entire tunable range: > +8 dBm
• Half width over entire tunable range: ~0.1 nm

Click here for spectrum output at low end (~1498.740 nm)
Click here for spectrum output at center (~1540.000 nm)
Click here for spectrum output at high end (~1581.293 nm)


This Anritsu MS9001B1 Optical Spectrum Analyzer is used, and in excellent condition.

Optical Interface: FC

Input Voltage: 120 VAC
This Anritsu MN938A Programmable Optical Attenuator is used and in excellent condition.

Optical Interface: FC/PC
Fiber Type: Multimode, 50/125 µm


Our technician measured at 1300 nm:
Insertion Loss: < 1.5 dB

Input Voltage: 120 VAC

This Anritsu MN938A Programmable Optical Attenuator is used and in excellent condition. The output connector does not include the standard Anritsu dust cap. An Artisan Technology Group provided dust cap will be included. Please see photo for more detail.

Optical Interface: FC/PC
Fiber Type: Multimode, 50/125 µm

Our technician measured at 1300 nm:
Insertion Loss: < 1.2 dB

Input Voltage: 120 VAC

This Anritsu J1411A / J0618F SC Quick Release Optical Connector - Option 40 is used and in excellent condition.

This item is also known as Agilent P/N 1005-1000 and JDSU / Acterna BN 2150/00.58.

*This item is an accessory and not sold separately. It must be combined with the purchase of a compatible piece of Anritsu / Agilent optical equipment.*

This Anritsu MS2601A Spectrum Analyzer is used and in excellent condition.
This Anritsu MP1656A Portable STM-16 Analyzer is used, and in excellent condition.

Features:
• Optical Interface: FC/SPC

• Opt 02: 1310/1550 nm Switchable Optical Output

Input Voltage: 120 VAC

This Anritsu MW9002C Optical Time Domain Reflectometer is used and in excellent condition.

Configuration:
• Laser Module: MW0938A

• Wavelengths: 1300 and 1550 nm
• Fiber Type: Singlemode
• Optical Connector: FC/PC
• Built in Printer

This Anritsu MU120011A E1/E3/E4 Module is used, and in excellent condition. It is a plug-in module for the MP1220A ATM quality analyzer.
Configuration:
• Optical Power Measurement Range: +10 to -80 dBm
• Wavelength Range: 750 to 1700 nm

• Optical Interface Adapter is sold separately
This Anritsu MF9619B Optical Modulator is used, and in excellent condition. It is an essential component of the Anritsu ME7890A or ME7890B Optical Amplifier Test Systems in qualifying WDM performance of EDFAs.

Optical Interface: FC

MU931421A Optical Sensors:
Measurement ranges of +10 to -80 dBm, A highly accurate optical sensor that achieves a measurement accuracy of ±2% and linearity of ±0.01 dB.
This Anritsu MP1552B SDH/PDH/ATM Analyzer is used, and in excellent condition. This unit has modules that test SDH and PDH electrical and SDH optical. Optical Interface: FC/PC. Front panel cover included.

Installed Modules:
MP0121A:
2/8/34/139/156M Unit
MP0129A:
2.5G (1310 and 1550nm) Unit, With Optical Power Meter

Installed Options:
MP1552B-01:
RS-232C
MP1552B-02:
GPIB

This Anritsu MF9619C Optical Modulator is used, and in excellent condition. Includes front panel cover plate. It is an essential component of the Anritsu ME7890A or ME7890B Optical Amplifier Test Systems in qualifying WDM performance of EDFAs.

Optical Interface: FC

This Anritsu MX789000B Optical Amplifier Test System Software for ME7890B System is used, and in excellent condition. (10) disks total. Software is version 1.0 for Windows 95 and Windows 3.1. Software sold by Artisan does not included a warranty and therefore cannot be returned.

*This item is an accessory and not sold separately. This software can only be purchased with an Anritsu MF9619 series modulator on the same order.*

This Anritsu MP1552B SDH/PDH/ATM Analyzer is used and in excellent condition. This unit has modules that test SDH and PDH electrical and SDH optical. Optical Interface: FC/PC. Front panel cover included.

Installed Modules:
MP0111A:
Optical 156M/622M (1310nm) Unit
MP0121A:
2/8/34/139/156M Unit
MP0129A:
2.5G (1310 and 1550nm) Unit, With Optical Power Meter

Installed Options:
MP1552B-01:
RS-232C
MP1552B-02:
GPIB

This Anritsu MG9001A Stabilized Light Source Unit is used and in excellent condition. This unit comes with a single plug in unit: MG0934E (850nm Multimode LD Source). Optical Interface: FC/PC.

Our Technician Measured (using GI/Multimode cable):
• Power: -3.38dBm (@ 0dB attenuation)
• Center Wavelength: 855.98nm
• FC type connector

Click here for the output spectrum of this unit.

This Anritsu MG9001A Stabilized Light Source Unit is used and in excellent condition. This unit comes with the MG0928D Edge-Emitting LED Source. The MG0928D is a single plug in unit that uses both channel slots. Optical Interface: FC/PC.

Our Technician Measured:
Center Wavelength: ~1550.2 nm
Half Width: ~18.2 nm
Maximum Optical Output Power: -28.9 dBm (peak)

Click here for output spectrum of half-width output viewed with Anritsu MS9710B.
Click here for output spectrum of output power vs wavelength viewed with Anritsu MS9710B.


This Anritsu MP1777A 10GHz Jitter Analyzer is used and in excellent condition.

Configuration:
• Modulation Input and Output Connectors: BNC

• Clock Input and Output Connectors: SMA
• Standard Measurement Speeds Installed: 2488.32, 4976.64, 9953.28 Mb/s
Opt 01: Additional Measurement Speeds Installed: 2494.16, 4988.32, 9976.64 Mb/s
Opt 02: Additional Measurement Speeds Installed: 2666.0571, 5332.1143, 10664.2286 Mb/s
Opt 10: High Sensitive Input installed which allows the unit to measure the jitter of input signals with amplitudes down to 150 mVp-p.

This Anritsu MP1580A Portable 2.5G/10G Jitter Analyzer is used and in excellent condition.

MP1580A Main Frame Option:

• Option 02 - GPIB

MU150018A 2.5G/10G Jitter Card Options:
• Option 02 - Wander Measurement
• Option 03 - Wander Reference Output Phase Modulation

Software Rev. 1.03

Dimensions 320 x 100 x 350 mm (W x H x D)
Voltage Input 100-120V/200-240V

This Anritsu MG922A White Light Source is used, and in excellent condition. This unit includes a 2M Fiber Optic Wand. Optical interface: FC.

View Photo of 2M Fiber Optic Wand.

This Anritsu MG99B Visible Light Source is used and in excellent condition. Optical Interface: FC / PC. This unit operates only at 115 VAC.

Our Technicians Measured:

• Center Wavelength: 633.048 nm
• Power Output: -8 dB Using Multimode Fiber

View Photo of the unit's output spectrum viewed with dBm Optics CSA.

This Anritsu MG9001A Stabilized Light Source Unit is used and in excellent condition. This unit comes with (2) 1300nm LED light source units MG0917A (Accepting Singlemode or Multimode fiber). Optical Interface: FC/PC.

Our Technician Measured (using GI/Multimode cable*):
• Ch1: Center: ~1289nm, Power: -17.36 dBm (@0dB attenuation)
• Ch2: Center: ~1293nm, Power: -17.76 dBm (@0dB attenuation)
*total output power is lower when using singlemode cable.

Click here for output spectrum of Channel 1.
Click here for output spectrum of Channel 2.


This Anritsu MG9001A Stabilized Light Source Unit is used and in excellent condition. This unit comes with the MG0928D Edge-Emitting LED Source. The MG0928D is a single plug in unit that uses both channel slots. Optical Interface: FC/PC.

Click here for output spectrum view with Anritsu MS9710B.

This Anritsu MW9060A Optical Time Domain Reflectometer (OTDR) Mainframe is used and in good condition. This unit does not include the necessary optical plug-in module. It is just the mainframe. This unit does come with an operating manual.

This unit has a crack in the translucent protective cover of the screen which can be seen here. Also there is a crack on the bottom left corner of the unit which can be seen here. This crack does not impact the operation of the unit.

This Anritsu MP1777A 10GHz Jitter Analyzer is used and in excellent condition.

Configuration:
• Modulation Input and Output Connectors: BNC

• Clock Input and Output Connectors: SMA
• Standard Measurement Speeds Installed: 2488.32, 4976.64, 9953.28 Mb/s
Opt 02: Additional Measurement Speeds Installed: 2666.0571, 5332.1143, 10664.2286 Mb/s

This Anritsu MF91A Optical Wavelength Meter is used and in excellent condition.

Configuration:

• Installed Optical Wavelength Module MH932A: 1.0-1.6 µm
• Optical Interface: FC/APC

This Anritsu ML4803A Power Meter is used and in excellent condition. This unit includes an MZ5003A power supply, an MA4001A range calibrator, and an MA4601A power sensor.

Input Power: 120 VAC
This Anritsu ML4803A Power Meter is used and in excellent condition. This unit includes an MZ5003A power supply, an MA4001A range calibrator, and a 5 ft connector cable.

Input Power: 120 VAC
This Anritsu MN939C Programmable Optical Attenuator is used and in excellent condition.

Optical Interface: FC/PC
Fiber Type: Singlemode, 9/125 µm

Our
Technician Measured, using a JDS PS3:
• Insertion Loss: < 3.0 dB

Input Voltage: 115 VAC

This Anritsu MG99A Visible Light Source is used and in excellent condition. Optical Interface: FC / PC. This unit operates only at 100 VAC.

Our Technicians Measured:

• Center Wavelength: 632 nm
• Power Output: -9 dB Using Multimode Fiber

View Photo of the unit's output spectrum viewed with dBm Optics CSA.

This Anritsu MD8480A W-CDMA Signaling Tester is used and in excellent condition.

Modules Installed

• (1) MU848059A Timing Generator
• (3) MU848058A TX Baseband
• (2) MU848057A Frame Coder
• (2) MU848053A RX Baseband
• (1) MU848055A ISDN
• (1) MU848052A Frame Decoder
• (1) MU848056A Voice Codec
• (1) MU848051A CPU

Software

• Firmware Ver. 5.50
• MX702600B CDMA2000 Scenario Composer

Accessories

• (2) Anritsu Monitor Boards
• Some Cabling Included See Photo

View Photo of the accessories and cabling.

This Anritsu MP1656A Portable STM-16 Analyzer is used, and in excellent condition.

Features:
• Optical Interface: FC/SPC

• Opt 03: 1310 nm Optical Output

Input Voltage: 120 VAC

This Anritsu MG923A Stabilized Light Source is used, and in excellent condition. Optical Interface: FC/PC.

Our Technician Measured:
• Wavelength: ~1558.4

• Maximun Optical Output Power: -5.44 dBm (peak)

Click here for output spectrum viewed with Anritsu MS9710B.


This Anritsu ME520A Digital Transmission Analyzer Transmitter is used and in excellent condition. This unit does not include the Digital Transmission Analyzer Receiver.

Input Voltage: 240 VAC

Specifications:

• Operating Frequency: 10 MHz to 3.2 GHz

• External Clock Input: 0.5 to 2 Vp-p

View Photo of this module from the perspective of the MP1632A front panel

This Anritsu MG9586A Wavelength Reference Light Source is used, and in excellent condition. Includes front panel cover plate.

Specs:

• Center wavelength: ~1547.5 nm
• Half width: 138.0 nm
• Total Output Power: -15.93 dBm

Click here for spectrum of half-width output.
Click here for spectrum of output power vs wavelength.


This Anritsu MN939A Programmable Optical Attenuator is used and in excellent condition.

Optical Interface: FC/PC
Fiber Type: Singlemode, 9/125 µm

Our Technician
Measured, using a JDS PS3:
• Insertion Loss: < 3.0 dB

Input Voltage: 120 VAC

This Anritsu MZ113A Stabilized Light Source Mainframe is used and in excellent condition. This unit comes with (6) MH917A (LED 1.3µm) Modules.

Features:

• Optical Interfaces: FC
• Unit Accepts Singlemode and Multimode Fiber

an Artisan Technology Group technician Measured Directly into a Power Meter without Fiber:
• Total Output Power of Each MH917A: ≥ -12 dBm

Click here for a representative diagram of the output power spectrum for the MH917A laser.

This Anritsu MP1656A Portable STM-16 Analyzer is used, and in excellent condition.

Features:
• Optical Interface: FC/SPC

• Opt 03: 1310 nm Optical Output

Input Voltage: 230 VAC

This Anritsu MN9320A Optical Channel Drop Unit is used, and in excellent condition. Includes front cover face plate. Anritsu Interchangeable Optical Interfaces Installed: (1) FC/PC and (1) SC/PC. Windows NT 4.0 SP5 Installed. 32 MB RAM.

Our Technician Measured: Insertion Loss: < 5 dB


This Anritsu MZ113A Stabilized Light Source Mainframe is used and in excellent condition. This unit comes with (2) MH917A (LED 1.3µm) modules 1300nm and (2) MH966A (LED 1.55µm) modules 1550nm.

Features:
• Optical Interfaces: FC
• Unit Accepts Singlemode and Multimode Fiber

an Artisan Technology Group technician Measured Directly into a Power Meter without Fiber:
• Total Output Power of Each MH917A: ≥ -14 dBm
• Total Output Power of Each MH966A: ≥ -16 dBm

Click here for a representative diagram of the output power spectrum for the MH917A laser.
Click here for a representative diagram of the output power spectrum for the MH966A laser.

Mainframe Options:
• Option 01: GPIB Interface Board
• Option 02: Ethernet Interface Board

Installed Options:

• MU163000A: 200M Clock Generator Unit with Option 01 Jitter Addition
• MU163020B: 200M 16-Channel Pulse Pattern Generator Unit
• MU163040B: 200M 16-Channel Error Detector Unit

Software Version 1.2

This unit includes the Anritsu MP1630B Manual, Anritsu MP1630B Operation Manual, and Anritsu MU163020B and MU163040B Operation Manual. View Photo of included manuals.

This Anritsu MD0623A G.703/G.704 2.048 Mb/s Bipolar interface module is used, and in excellent condition. It is a plug-in module for the MD6420A Data Transmission Analyzer.
This Anritsu MD0630B Codec Interface Unit is used, and in excellent condition.
This Anritsu MD0620A GP-IB Remote Unit Interface is used, and in excellent condition. It is a plug-in module for the MD6420A Data Transmission Analyzer.
This Anritsu ML93B Optical Power Meter w/ MA98A Optical Power Sensor is used, and in excellent condition. Optical Interface connector not included. This unit requires a Cal Factor for every wavelength for proper operation.

Our Technician Measured and Calculated the Cal Factor for 1550.92 nm: +1.46 dB


This Anritsu MP1220A ATM Quality Analyzer is used, and in excellent condition. A pen stylus is included. Keyboard and mouse sold separately.

Windows 3.1 Installed

ATM Quality Analyzer Software Ver. 2.6

This Anritsu MD1620B Signaling Tester is used, and in excellent condition.

Features:
• Japanese menu system
• Opt 01: PDC 1.5 GHz

• Opt 03: Extended 800 MHz frequency reange
• Opt 02 and 12 also installed
• MD1260B Floppy Disk v3.2
• MD1260B Floppy Disk v4.4
• TDK Circulator (810 to 956 MHz)
• TDK Circulator (1429 to 1513 MHz)

This Anritsu MU120020A QoS Module is used, and in excellent condition.
This Anritsu MU120002A STM-1/OC-3 Module is used, and in excellent condition.

Optical Interface: SC
Configuration:

Optical Interface: PC*
Fiber Type: Singlemode, 9/125 um
Rated Output Power: 10 ± 1 dBm

Opt 08:
193.80 THz / 1546.92 nm

*The Anritsu J14 / J06 Series Quick Release Optical Connectors are sold separately. They are available for purchase from our website here: (Item #62894).

This Anritsu MU120001A STM-4/OC-12 Module is used, and in excellent condition. It is a plug-in module for the MP1220A ATM quality analyzer.

P/N: 32076400
This Anritsu MU952502A DFB Laser Source Module, Option 01 is used and in excellent condition.

Configuration:

Optical Interface: PC*
Fiber Type: Singlemode, 9/125 um
Rated Output Power: 10 ± 1 dBm
Opt 01:
192.10 THz / 1560.61 nm

*The Anritsu J14 / J06 Series Quick Release Optical Connectors are sold separately. They are available for purchase from our website here: (Item #62894).

This Anritsu MG0937C 2-Slot LD Source Module is used and in excellent condition.

Wavelength: 1310 nm
Optical Interface: FC/PC
This Anritsu J1412A / J0619B HMS-10/A Quick Release Optical Connector - Option 43 is used and in excellent condition.

*This item is an accessory and not sold separately. It must be combined with the purchase of a compatible piece of Anritsu / Agilent optical equipment.*

This Anritsu J1410A / J0618E DIN47256 Quick Release Optical Connector - Option 39 is used and in excellent condition.

*This item is an accessory and not sold separately. It must be combined with the purchase of a compatible piece of Anritsu / Agilent optical equipment.*

This Anritsu MP0121A 2/8/34/139/156M Unit is used and in excellent condition.
This Anritsu MA96A Optical Power Sensor is used and in excellent condition.

Sensor Cable is not included. Please contact manufacturer for pricing and availability.

Configuration:

• Wavelength Range: 0.75 µm to 1.8 µm
• Power Range: -80 to 0 dBm (at 1.3 µm)
• Sensor: Ge
• Optical Connector: Biconic

Mainframe Options:
• Option 01: GPIB Interface Board
• Option 02: Ethernet Interface Board

Installed Options:

• MU163000A: 200M Clock Generator Unit with Option 01 Jitter Addition
• MU163020B: 200M 16-Channel Pulse Pattern Generator Unit
• MU163040B: 200M 16-Channel Error Detector Unit

Software Version 1.2

This unit includes the Anritsu MP1630B Manual, Anritsu MP1630B Operation Manual, and Anritsu MU163020B and MU163040B Operation Manual. View Photo of included manuals.

Channel 1 is bad. View pass / fail information: MP1630B Selftest Data (pdf).

Power Supply and Cables are not included.
This Anritsu MN9320A Optical Channel Drop Unit is used, and in excellent condition. Includes front cover face plate. Optical Interface: FC/PC. Windows NT 4.0 SP5 Installed. 32 MB RAM.

Our Technician Measured: Insertion Loss: < 5 dB


This Anritsu ME0315B Optical Receiver is used and in excellent condition.

Configuration:

• Operation Bit Rates: 622 Mb/s, 2.5 Gb/s
• Option 40: SC Optical Connector

This Anritsu MG0303A Burst Function Unit is used and in excellent condition.
This unit includes an Anritsu MP529A, which is rated at 50Ω.

Mainframe Options:

• Option 01: GPIB Interface Board
• Option 03: 3.2G Internal Synthesizer

Installed Options:
• MU163220A: 3.2G Pulse Pattern Generator
• MU163240A :3.2G Error Detector

Software Version 1.17

View Photo of Anritsu MP529A.

The Anritsu J14 / J06 Series Quick Release Optical Connectors are sold separately. They are available for purchase from our website here: (Item #62894).
This Anritsu MP1201C Error Rate Tester is used and in excellent condition.

Dimensions: 4"H x 18"W x 20"D

Transmitter Internal Clock Output Frequency:

• 100 Hz, 300 Hz, 600 Hz, 1.2 kHz, 2.4 kHz, 4.8 kHz, 8 kHz, 9.6 kHz, 16 kHz, 32 kHz

Transmitter External Clock Input:
• Frequency: 40 Hz to 1.2 MHz
• Input Level: TTL
• Input Impedence: High
• Connector: BNC

Transmitter NRZ Output:
• Frequency: 40 Hz to 1.2 MHz
• Output Level: TTL
• Load: 75Ω
• Connector: BNC

Receiver NRZ Input:
• Frequency: 40 Hz to 1.2 MHz
• Input Level: TTL
• Input Impedance: High
• Connector: BNC

This Anritsu A04 Transform Module is used and in excellent condition. This unit includes all cables, as pictured. This unit was removed from an Anritsu MP1632A.

Part Number:
422U16802

Configuration:

• 3.24 GB Hard Drive Installed

This Anritsu A03 Sub CPU Module is used and in excellent condition. The A03 Sub CPU Module is a CPU card for the MP1220A. This unit was removed from an Anritsu MP1632A.

Part Number: 422U16804
This Anritsu A10 SRAM Module is used and in excellent condition. This unit was removed from an Anritsu MP1632A.

Part Number: 422U16818
This Anritsu GP-IB ISA Module is used and in excellent condition. This unit was removed from an Anritsu MP1632A.

Part Number: 422U16928
Showing 1-100 of 124 Results
Contact Us
Fax:

(240) 376-1381