Items/Page
Showing 1-100 of 223 Results
Configuration:
• Input Voltage: 24-40 VDC
• Output Current (Switch Selectable): 1.0-3.5 Amps
This Driver is also known as a Warner Electric SS2000D6 Motor Driver.

Configuration:
• Input Voltage: 115 VAC

• Output Current: 1.0-6.0 Amps
This unit has some minor wear due to storage.

Configuration:
• Input Voltage: 115 VAC

• Output Current: 1.0-6.0 Amps

This Danaher Motion / Superior Electric 440-EPI10 Indexer Drive is used and in excellent condition.

Part Number: PAC-440EPI10
The SS2000D6i series drive includes all of the superior features of the SS2000D6 with additional features like optically isolated I/O (8 inputs, 4 outputs). This driver is also known as a Warner Electric SS2000D6i Motor Driver.

Configuration:
• Input Voltage: 115 VAC
• Output Current: 1.0-6.0 Amps

This Danaher Motion / Superior Electric 440-EPI Indexer Drive is used and in excellent condition.
This SS2000I unit has the Memory Module installed.

Part Numbers: SS2000I, SS2000I-101
This Danaher Motion / Superior Electric SLO-SYN 430-EPI Indexer Motor Drive is used and in excellent condition.

Part Number: 430-T
• Current Per Phase: 3.5 Amps Peak
• VA Per Phase: 96 VA Nominal
M062-LS03 Motor:
• Stack Length: Double Stack
• Connections: 6-Lead Cable
• Voltage (Unipolar): 5.3 VDC
• Current (Unipolar): 1.6 A

• Min Holding Torque (Unipolar): 100 oz-in
• Rotor Inertia: 0.0034 oz-in-s² (0.24 kg-cm²)
• Minimum Residual Torque: 1.4 oz-in (0.99 Ncm)

Configuration:
• Input Voltage: 115/230 VAC
• Output Current: 0.1 Amps
This Danaher Motion/Superior Electric SLO-SYN 430-PI Indexer Motor Drive is used and in excellent condition.
M061-LS-301 Motor:
• Stack Length: Single Stack
• Connections: 6-Lead Cable
• Min Holding Torque (Unipolar): 53 oz-in

• Rotor Inertia: 0.0017 oz-in-s² (0.12 kg-cm²)
• Minimum Residual Torque: 1.0 oz-in (0.71 Ncm)

SS400-1122U Motor:
• Input Voltage: 120 VAC
• Min. Torque: 720 oz-in
• RPM: 72
M063-LE09 Motor:
• Stack Length: Triple Stack
• Connections: 8-Lead Cable
Part Number: MX2000-2A

Configuration:

• Slot 1: Power Supply Board Including Digital I/O Interface

• Slot 2: 32-Bit DSP Controller
• Slot 3: Dual-Axis Interface Board

Part Numbers: 224042, 221794-2, 221797

M062-LS09 Motor:
• Stack Length: Double Stack
• Connections: 6-Lead Cable (Cable length and config might be different than photo)

• Voltage (Unipolar): 1.7 VDC
• Current (Unipolar): 4.7 A
• Min Holding Torque (Unipolar): 100 oz-in
• Rotor Inertia: 0.0034 oz-in-s² (0.24 kg-cm²)
• Minimum Residual Torque: 1.4 oz-in (0.99 Ncm)

Configuration:
• Input Voltage: 24-75 VDC
• Output Current (Switch Selectable): 1.0-7.0 Amps

• Step Resolution: Full, 1/16, 1/64, 1/128
This unit ships in manufacturer's box.

Part Number: 230-T
• Current Per Phase: 2 Amps Peak
• VA Per Phase: 56 VA Nominal
This Danaher Motion / Superior Electric 440-EPI10 Indexer Drive is new from surplus stock.

Part Number: 440EPI10, PAC-440EPI10
M092-FD-8109 Motor:

• Frame Diameter: 3.4"
• Double Stack
• 8 Lead Connection

• Coil Rating: 8109


Configuration:
• Input Voltage: 24-40 VDC
• Output Current (Switch Selectable): 0.5-3.5 Amps
M063-LS09 Motor:
• Stack Length: Triple Stack
• Connections: 6-Lead Cable
• Min Holding Torque: 150 oz-in
SS452 Motor:
• Input Voltage: 208/240 VAC
• Min Torque: 450 oz-in
• Load Inertia: 7.5 lb-in2

• 0.30 Amps

Superior Electric Synchronous MotorsDatasheet (pdf)

Part Number: 230-TH
• Current Per Phase: 2 Amps Peak
• VA Per Phase: 56 VA Nominal
TS25-1008 Motor:

• 6-Lead Cable
• 20 oz-in Static Torque
• Nominal DC Volts: 5.4

• Max Driver Current: 1.5 A
• Steps/Rev.: 72


Product Family: 6105-00-406-7619, 6105004067619

This unit includes the the optional communication card.

Configuration:
• Input: 115V
SS25 Motor:
• Frequency: 50/60 Hz
• RPM: 72 @ 60 Hz
• Input Voltage: 120 V
Configuration:
• Input Voltage: 24-75 VDC
• Output Current (Switch Selectable): 1.0-7.0 Amps
M092-FF-402:
• Frame Diameter: 3.4"
• Double Stack
• 4 Lead Connection
• Coil Rating 402


Part Number: 221794, 221794-2B, 221794-2F, 221794-2G, 221795-001-C
M062-LE09 Motor:
• Stack Length: Doube Stack
• Connections: 8-Lead Cable
• Min Holding Torque (Unipolar): 100 oz-in

• Rotor Inertia: 0.0034 oz-in-s² (0.24 kg-cm²)
• Minimum Residual Torque: 1.4 oz-in (0.99 Ncm)

Configuration:
• Frame: 4.2 in (10.67 cm)
• Stack: Single
• Connections/Flange: 6 Terminal
• Coil Rating: 12
Installed Boards
• (3) SLO-SYN Dual-Axis Interface Boards
• (1) 32-Bit DSP Controller
• (1) SLO-SYN 2000 I/O Expansion Board

• (1) SLO-SYN MX8 Power Supply

Input Voltage: 115/230V

Part Numbers: 221797-2C, 221797-1F, 221794-2F, 221803-1C

If you would like to purchase part of this system contact an Artisan Technology Group Sales Associate for pricing and availability.

The SS2000D3i series drive includes all of the superior features of the SS2000D3 with additional features like optically isolated I/O.

Configuration:
• Input Voltage: 120 VAC
• Output Current (Switch Selectable): 0.5-3.0 Amps


Accompanying resistor and capacitor for operation are sold separately.

SS50-P1 Motor:

• 3-Lead Cable

• Geared Shaft
• Rated 120 oz-in Static Torque
• Input Voltage: 120 V
• Rated RPM: 16.6 at 60 Hz


This Danaher Motion / Superior Electric SS241-1032 Slo-Syn Indexer Motor is new from surplus stock.

Configuration:

• Torque: 240 oz-in / 169 N-cm
• Voltage: 120 VAC
• Load Inertia: 2.5 lb-in2/ 7 kg-cm2


M062-LS09E Motor:
• Stack Length: Double Stack

• Connections: 6-Lead Cable (Cable length and config might be different than photo)
• Voltage (Unipolar): 1.7 VDC
• Current (Unipolar): 4.7 A
• Min Holding Torque (Unipolar): 100 oz-in
• Rotor Inertia: 0.0034 oz-in-s² (0.24 kg-cm²)
• Minimum Residual Torque: 1.4 oz-in (0.99 Ncm)
• Shaft: Double Ended

M063-LS09 Motor:
• Stack Length: Triple Stack
• Connections: 6-Lead Cable
• Min Holding Torque: 150 oz-in
M061-LS-311 Motor:
• Stack Length: Single Stack
• Connections: 6-Lead Cable
• Min Holding Torque (Unipolar): 53 oz.-in.

• Steps: 200 Per Revolution
• Voltage: 20.0 VDC
• Amperage: 0.22A

SS50E-P1 Motor:
• 3-Lead Cable
• Rated 120 oz-in Static Torque
• Input Voltage: 120 V

• Rated RPM: 16.6 at 72 Hz

M092-FC09 Motor:
• Frame Diameter: 3.4"
• Double Stack
• 6 Lead Connection
• Coil Rating: 09
This SS2000I unit has the Encoder Module installed. With this module added to the SS2000I, it becomes operationally identical to an SS2000I-V.
This unit includes the the optional communication card.

Configuration:
• Input: 115V
Configuration:
Input Voltage: 24-75 VDC
Output Current (Switch Selectable): 1.0-7.0 Amps
Configuration:
• Input Voltage: 24-40 VDC
• Output Current (Switch Selectable): 0.5-3.5 Amps
Configuration:
• Input Voltage: 24-75 VDC
• Output Current (Switch Selectable): 1.0-7.0 Amps
Installed Boards
• (3) SLO-SYN Dual-Axis Interface Boards
• (1) 32-Bit DSP Controller
• (2) SLO-SYN 2000 I/O Expansion Board

• (1) SLO-SYN MX8 Power Supply

Input Voltage: 115/230V

Part Numbers: 221797-1B, 221794-2F, 221803-1C

If you would like to purchase part of this system contact an Artisan Technology Group Sales Associate for pricing and availability.

This Danaher Motion / Superior Electric SLO-SYN 430-PTX Translator Motor Drive is the "X" version of the PT Series which operates with input voltage from 187 to 264 V.

Configuration:
• Input Voltage: 187 to 264 V
• J2 Connector: 8-Pin Female

Configuration:
• Stack Length: Single Stack
• Connections: 8-Lead Cable (Cables are of Varying Lengths)

• Volts: 1.25 VDC
• Amps: 3.8 Amps
• Steps: 200 Steps/Rev

This unit ships in the manufacturer's box.

SS50-1204 Motor:

• 6-Lead Cable
• Geared Shaft

• Rated 50 oz-in Static Torque


M061-FC02 Motor:
• Stack Length: Single Stack
• Connections: 4-Lead Cable
• Min Holding Torque (Unipolar): 60 oz-in

• Rotor Inertia: 0.0017 oz-in-s² (0.12 kg-cm²)
• Minimum Residual Torque: 1.0 oz-in (0.71 Ncm)

Installed Boards
• (3) SLO-SYN Dual-Axis Interface Boards
• (1) SLO-SYN 32-Bit DSP Controller

• (1) SLO-SYN MX2 Power Supply

Input Voltage: 115/230V

If you would like to purchase part of this system contact an Artisan Technology Group Sales Associate for pricing and availability.

SS131-2001E Motor:
• 18 Steps / Rev
• 120 VAC, 50/60 Hertz
• 0.3-Amps
M063-FC09 Motor:
• Stack Length: Triple Stack
• Connections: 6-Lead Cable
Installed Boards
• (2) SLO-SYN Dual-Axis Interface Board
• (1) 32-Bit DSP Controller

• (1) SLO-SYN Power Supply

Input Voltage: 115/230V

If you would like to purchase part of this system contact an Artisan Technology Group Sales Associate for pricing and availability.

This Danaher Motion / Superior Electric 440-TH10 Translator Motor Drive is used and in excellent condition.
Configuration:
• Stack Length: Triple Stack
• Connections: 6-Lead Cable
This unit has sustained damage to the housing and has a broken screw terminal; however, this will not prevent it from functioning.

M093-FF-402:
• Frame Diameter: 3.4"
• Triple Stack
• 4 Lead Connection
• Coil Rating 402

View Photo of damage to housing.

View Photo of broken screw terminal.

This unit includes Motion Controller Programming Interface (MCPI) Software as well as an Installation and Operation Manual.
This unit has been customized. This unit is also known as Design Components Model Number MNC-002.

M062-LS09 Motor:
• Stack Length: Double Stack

• Connections: 4-Lead Cable
• Voltage (Unipolar): 1.7 VDC
• Current (Unipolar): 4.7 A
• Min Holding Torque (Unipolar): 100 oz-in
• Rotor Inertia: 0.0034 oz-in-s² (0.24 kg-cm²)
• Minimum Residual Torque: 1.4 oz-in (0.99 Ncm)

M062-LF-402 Motor:
• Stack Length: Double Stack
• Connections: 4-Lead Cable
• Min Holding Torque (Unipolar): 100 oz-in

• Rotor Inertia: 0.0034 oz-in-s² (0.24 kg-cm²)
• Minimum Residual Torque: 1.4 oz-in (0.99 Ncm)

Cable is short. Customer will need to replace connection cable.

M062-LS03 Motor:
• Stack Length: Double Stack
• Connections: 6-Lead Cable

• Voltage (Unipolar): 5.3 VDC
• Current (Unipolar): 1.6 A
• Min Holding Torque (Unipolar): 100 oz-in
• Rotor Inertia: 0.0034 oz-in-s² (0.24 kg-cm²)
• Minimum Residual Torque: 1.4 oz-in (0.99 Ncm)

The housing on this unit has been altered and the center of the shaft has been drilled and tapped.

M062-LF-402 Motor:
• Stack Length: Double Stack

• Connections: 4-Lead Cable
• Min Holding Torque (Unipolar): 100 oz-in
• Rotor Inertia: 0.0034 oz-in-s² (0.24 kg-cm²)
• Minimum Residual Torque: 1.4 oz-in (0.99 Ncm)

View Photo of altered housing.
View Photo of drilled and tapped shaft.

This Danaher Motion / Superior Electric 440-EPI-V Indexer Drive is used and in excellent condition.
M063-LS-502 Motor:
• Stack Length: Triple Stack
• Connections: 6-Lead Cable
• Min Holding Torque: 150 oz-in
This Danaher Motion / Superior Electric M093-FD-301 SLO-SYN Stepper Motor is used and in good condition. This unit has a chipped housing; however, this does not affect its ability to function properly.

M093-FD-301 Motor:

• Frame Diameter: 3.4"
• Triple Stack
• 6 Lead Connection
• Coil Rating: 301


View Photo of chipped housing.

This is for the motor board component only, this unit does not come with the connection board.

Input Voltage: 120 VAC
This Danaher Motion / Superior Electric SLO-SYN 230-EPI Indexer Motor Drive is used and in excellent condition.
M093-FD-8014 Motor:

• Frame Diameter: 3.4"
• Triple Stack
• 6 Lead Connection

• Coil Rating: 8014


The XWC-D6i External Wiring Card provides easy access for wiring I / O and RS232 / RS485 communications.

Part number: 226436-001-B
Part Number: MX2000-2

Configuration:

• Slot 1: Power Supply Board
• Slot 2: 32-Bit DSP Controller

• Slot 3: Dual-Axis Interface Board

Part Numbers: 222416-1B, 222416-1F, 221794-2B, 221794-2F, 221797-1B

M091-LS09 Motor:
• Frame Diameter: 3.4"
• Single Stack
• 6 Lead Connection

• Coil Rating: 08

Similar to Model #: M091-FD09

Showing 1-100 of 223 Results
Contact Us
Fax:

(240) 376-1381