Items/Page
Showing 1-100 of 531 Results
Configuration:
• Cable Length: 0.5 m (1.6 ft)
• Connector: Miniature ClickLoc Coaxial

• Agency Approval: Not Required


Configuration:
• Cable Length: 0.5 m (1.6 ft)
• Connector: Miniature ClickLoc Coaxial

• Agency Approval: Multiple Approvals


This unit ships in the original manufacturer's packaging. Probes and Extension Cables are sold separately.

Configuration:

• Total Length and Mounting Option: 5 Meters System Length, DIN Mount
• Agency Approval Option: Multiple Approvals

The GE / Bently 3300 XL 5/8mm Proximitor Sensor is compatible with all 5 and 8 mm 3300 and 3300 XL probes. The 3300 XL Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DINrail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting "footprint" with older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates.

Part Number: 330180-51-05

Probes and Extension Cables are sold separately.

Configuration:

• Total Length and Mounting Option: 9 Meters System Length, DIN Mount
• Agency Approval Option: Multiple Approvals

The GE / Bently 3300 XL 5/8mm Proximitor Sensor is compatible with all 5 and 8 mm 3300 and 3300 XL probes. The 3300 XL Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DINrail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting "footprint" with older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates.

Part Number: 330180-91-05

This unit is also known as the 3500/22 10 Base-T/100 Base-TX I/O Module.

Part Number: 146031-01
Probes and Extension Cables are sold separately.

Configuration:

• Total Length and Mounting Option: 5 Meters System Length, Panel Mount
• Agency Approval Option: Multiple Approvals

The GE / Bently 3300 XL 5/8mm Proximitor Sensor is compatible with all 5 and 8 mm 3300 and 3300 XL probes. The 3300 XL Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DINrail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting "footprint" with older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates.

Part Number: 330180-50-05

Configuration:
• Cable Length: 0.5 m (1.6 ft)
• Connector: Miniature ClickLoc Coaxial

• Agency Approval: Multiple Approvals


Each Accelerometer has the CE, CSA, ATEX, and Brazil agency approvals engraved on the side casing.

Configuration:

• Mounting Thread Option: M8 x 1 Integral Stud

Part Number: 330400-02-00

Configuration:
• Cable Length: 8 m (26.2 ft.)
• Connector Protector and Cable Option: Standard Cable

• Agency Approval Option: None
Probes and Extension Cables are sold separately.

Configuration:

• Total Length and Mounting Option: 9 Meters System Length, DIN Mount
• Agency Approval Option: Multiple Approvals

The GE / Bently 3300 XL 5/8mm Proximitor Sensor is compatible with all 5 and 8 mm 3300 and 3300 XL probes. The 3300 XL Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DINrail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting "footprint" with older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates.

Part Number: 330180-91-05

Probes and Extension Cables are sold separately.

Configuration:

• Total Length and Mounting Option: 9 Meters System Length, Panel Mount
• Agency Approval Option: Multiple Approvals

The GE / Bently 3300 XL 5/8mm Proximitor Sensor is compatible with all 5 and 8 mm 3300 and 3300 XL probes. The 3300 XL Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DINrail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting "footprint" with older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates.

Part Number: 330180-90-05

Probes and Extension Cables are sold separately.

Configuration:

• Total Length and Mounting Option: 5.0 Meter (16.4 feet) System Length, DIN Mount (Extension Cable Sold Separately)
• Agency Approval Option: Multiple approvals

Part Number: 330780-51-05

Configuration:
• Cable Length: 1 m (3.3 feet)
• Connector: Miniature ClickLoc Coaxial

• Agency Approval: Multiple Approvals


Probes and Extension Cables are sold separately.

Configuration:

• Total Length and Mounting Option: 5.0 Meter (16.4 feet) System Length, DIN Mount (Extension Cable Sold Separately)
• Agency Approval Option: Multiple Approvals

Part Number: 330780-51-05

Probes and Extension Cables are sold separately.

Configuration:

• Total Length and Mounting Option: 9 Meters System Length, Panel Mount
• Agency Approval Option: Not Required

The GE / Bently 3300 XL 5/8mm Proximitor Sensor is compatible with all 5 and 8 mm 3300 and 3300 XL probes. The 3300 XL Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DINrail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting "footprint" with older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates.

Part Number: 330180-90-00

Configuration:
• Unthreaded Length: 0.0 in
• Overall Case Length: 3.0 in
• Total Length: 1.0 m (3.3 ft)

• Connector and Cable-Type: Miniature Coaxial ClickLoc Connector, Standard Cable
• Agency Approval: Multiple Approvals

Each Accelerometer has the CE, CSA, ATEX, and Brazil agency approvals engraved on the side casing.

Configuration:

• Mounting Thread Option: 1/4-28 UNF Integral Stud

Part Number: 330400-01-05

This unit ships in the original manufacturer's packaging. Each Accelerometer has the CE, CSA, ATEX, and Brazil agency approvals engraved on the side casing.

Configuration:
• Mounting Thread Option: M8 x 1 Integral Stud

Part Number: 330400-02-00

Configuration:
• Cable Length: 8 m (26.2 ft.)
• Connector Protector and Cable Option: Standard Cable

• Agency Approval Option: None
Probes and Extension Cables are sold separately.

Configuration:

• Total Length and Mounting Option: 9 Meters System Length, Panel Mount
• Agency Approval Option: Multiple Approvals

The GE / Bently 3300 XL 5/8mm Proximitor Sensor is compatible with all 5 and 8 mm 3300 and 3300 XL probes. The 3300 XL Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DINrail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting "footprint" with older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates.

Part Number: 330180-90-05

Configuration:
• Cable Length: 4.5 metres (14.8 feet)
• Connector Protector and Cable Option: Standard Cable

• Agency Approval Option: Not Required


Probes and Extension Cables are sold separately.

Configuration:

• Total Length and Mounting Option: 5 Meters System Length, Panel Mount
• Agency Approval Option: Multiple Approvals

The GE / Bently 3300 XL 5/8mm Proximitor Sensor is compatible with all 5 and 8 mm 3300 and 3300 XL probes. The 3300 XL Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DINrail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting "footprint" with older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates.

Part Number: 330180-50-05

Configuration:
• Cable Length: 1 m (3.3 feet)
• Connector: Miniature ClickLoc Coaxial

• Agency Approval: None Required


This is the older version of the 18745-04 and only supports 5mm 7200 probes.

Additional part number: 18745-02
Probes and Extension Cables are sold separately.

Configuration:

• Total Length and Mounting Option: 5 Meters System Length, DIN Mount
• Agency Approval Option: Multiple Approvals

The GE / Bently 3300 XL 5/8mm Proximitor Sensor is compatible with all 5 and 8 mm 3300 and 3300 XL probes. The 3300 XL Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DINrail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting "footprint" with older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates.

Part Number: 330180-51-05

The mount is not included. Probes and Extension Cables are sold separately.

Configuration:

• Total Length and Mounting Option: 9 Meters System Length, Panel Mount
• Agency Approval Option: Multiple Approvals

The GE / Bently 3300 XL 5/8mm Proximitor Sensor is compatible with all 5 and 8 mm 3300 and 3300 XL probes. The 3300 XL Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DINrail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting "footprint" with older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates.

Part Number: 330180-90-05

Configuration:
• Cable Length: 4.5 metres (14.8 feet)
• Connector Protector and Cable Option: Standard Cable

• Agency Approval Option: Not Required


Part Number: 126398-01G, 149371-01G, 149369-01H, 149369-01
Configuration:
• Type (01): Standard
• Approvals Option (00): None

Part Number: 89998-01, 87890-01
The full model Number of this unit is unknown.

Part Number: 288055-01
Probes and Extension Cables are sold separately.

Configuration:

• Total Length and Mounting Option: 5 Meters System Length, Panel Mount
• Agency Approval Option: Not Required

The GE / Bently 3300 XL 5/8mm Proximitor Sensor is compatible with all 5 and 8 mm 3300 and 3300 XL probes. The 3300 XL Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DINrail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting "footprint" with older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates.

Part Number: 330180-50-00

Configuration:
• Unthreaded Length: 0.0 in
• Overall Case Length: 2.4 in
• Total Length: 0.5 m (1.6 ft)

• Connector and Cable-Type: Miniature Coaxial ClickLoc Connector, Standard Cable
• Agency Approval: Multiple Approvals


This unit is also known as the 3500/22 10 Base-T/100 Base-TX I/O Module.

Part Number: 146031-01
Configuration:
• Minimum Operating Frequency (RPM): 600

• Angular Range of Operation (Degrees from Zero): 90° ±10°
• Mounting Base Option: Circular ¼-28 Tap
• Connector Mounting Option: Side Mount

Configuration:
• Full Scale Range Option(03): 0-10 mils peak-to-peak(pp)
• Transducer Input Option(01): 7200, 200 mV/mil

• Alarm Relay Option(01): Expoxy-sealed
• Agency Approval Option(00): Not Required
• Safety Barrier Option(00): None
• Trip Multiply Option(00): None

Part Number: 86827-01

Configuration:
• Total Length Option: 1.0 Meter (3.3 Feet)
• Connector Option: Miniature ClickLoc Coaxial Connector

• Agency Approval Option: Multiple Approvals
Configuration:
• Full Scale Range Option(02): 0-5 mils peak-to-peak(pp)
• Transducer Input Option(01): 7200, 200 mV/mil

• Alarm Relay Option(00): No Relays
• Agency Approval Option(00): Not required
• Safety Barrier Option(00): None
• Trip Multiply Option(00): None

Part Number: 86827-01, 135305-01

Configuration:
• Mounting Thread Adapter Option: 1/4 - 28 UNF
• Agency Approval Option: Not Required

Probes and Extension Cables are sold separately.

Configuration:

• Total Length and Mounting Option: 9 Meters System Length, Panel Mount
• Agency Approval Option: Not Required

The GE / Bently 3300 XL 5/8mm Proximitor Sensor is compatible with all 5 and 8 mm 3300 and 3300 XL probes. The 3300 XL Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DINrail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting "footprint" with older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates.

Part Number: 330180-90-00

This unit does not include the display panel. The 3300 Six-Channel Temperature Monitor provides six independent channels of on-line temperature monitoring. Each monitor is suitable for virtually all types of temperature measurements.

Configuration:
• Transducers: RTD

Part Number: 81228-01, 79492-01

Configuration:
• Cable Length: 4.5 Meters (14.8 Feet)
• Connector Protector and Cable Option: Standard Cable

• Agency Approval Option: Multiple Approvals
Configuration:
• Cable Length: 4.0 metres (13.1 feet)
• Connector Protector and Cable Option: Standard Cable

• Agency Approval Option: Not Required


Probes and Extension Cables are sold separately.

Configuration:
• 9 Meter System Length
• Panel Mount

• No Approvals

Part Number: 330850-90-00

Configuration:
• Full Scale Range Option(02): 0-5 mils peak-to-peak(pp)
• Transducer Input Option(01): 7200, 200 mV/mil

• Alarm Relay Option(02): Hermetically-sealed
• Agency Approval Option(03)
• Safety Barrier Option(00): None
• Trip Multiply Option(00): None

Part Number: 86827-01

The 3300 ac Power Supply delivers reliable, regulated power for up to 12 monitors and their associated transducers. A second Power Supply in the same rack is never required. The Power Supply is installed in the left-most location (position 1) in a 3300 rack, and converts 115 Vac or 220 Vac into dc voltages used by the monitors installed in the rack. The Power Supply is equipped with a line noise filter as standard.

Configuration:
• Input Voltage Option (01): 95-125 VAC
• Power Input Module Option (20): Standard
• Agency Approval Option (01): CSA/NRTL/C

Part Number: 88219-01

Probes and Extension Cables are sold separately.

Configuration:

• Total Length and Mounting Option: 5 Meters System Length, Panel Mount
• Agency Approval Option: Not Required

The GE / Bently 3300 XL 5/8mm Proximitor Sensor is compatible with all 5 and 8 mm 3300 and 3300 XL probes. The 3300 XL Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DINrail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting "footprint" with older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates.

Part Number: 330180-50-00

Configuration:
• Unthreaded Length: 0.0 in
• Overall Case Length: 2.5 in
• Total Length: 1 m (3.3 ft)

• Connector and Cable-Type: Miniature Coaxial ClickLoc Connector, Standard Cable
• Agency Approval: Not required


Configuration:
• Rack Interface Type: Standard RIM (Use for Standard Monitoring Applications)

Part Number: 125744-02
This unit is electronically powered.

Part Number: 14700-01


View Photo of interior.

Configuration:
• Full Scale Range Option(03): 0-10 mils peak-to-peak(pp)
• Transducer Input Option(01): 7200, 200 mV/mil

• Alarm Relay Option(01): Expoxy-sealed
• Agency Approval Option(01): CSA/NRTL/C
• Safety Barrier Option(00): None
• Trip Multiply Option(00): None

Cables not included.

Configuration:
• Total Length Compatibility: 9 Meters (29.5 Feet)

• Agency Approvals: None Required

Part Number: 330100-90-00

Probes and Extension Cables are sold separately.

Configuration:

• Total Length and Mounting Option: 9 Meters System Length, DIN Mount

The GE / Bently 3300 XL 5/8 mm Proximitor Sensor is compatible with all 5 and 8 mm 3300 and 3300 XL probes. The 3300 XL Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DINrail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting "footprint" with older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates.

Part Number: 330180-91-00

This unit comes in a traveling case.

View Photo of traveling case.


Part Number: 108000-02

This unit has defects in the LCD screen; however, this will not prevent it from functioning properly.
This is the newer version of the 18745-04 and supports both 5mm and 8mm 7200 probes. Probes and Extension Cables are sold separately.

This GE / Bently Nevada CP95 Connector Protector Kit is new from surplus stock.

Inlcudes:

• Connector Protectors (Pack of 10 Pairs) , Part Number: 40180-02
• (2) Application Tools, Female and Male

Configuration:
• Cable Length: 8 m (26.2 ft.)
• Connector Protector and Cable Option: Standard Cable

• Agency Approval Option: Multiple Approvals
This GE / Bently Nevada 1701/05 FieldMonitor Terminal Base is used and in excellent condition.
Configuration:
• Unthreaded Length: 0.0 in
• Overall Case Length: 1.6 in
• Total Length: 1.0 m (3.3 ft)

• Connector and Cable-Type: Miniature Coaxial ClickLoc Connector, Standard Cable
• Agency Approval: Multiple Approvals

Configuration:
• Type (01): Standard
• Approvals Option (01): CSA/NRTL/C

Part Number: 89998-01, 87890-01
Configuration:
• I/O Module Type: Modbus RS485 I/O Module

Part Number: 133323-01
Configuration:
• Type (01): Standard
• Approvals Option (03): Basic to DDI Upgrade

Part Number: 89998-01, 87890-01
Configuration:
• Full Scale Range Option(11): 0-100 µm peak-to-peak(pp)
• Transducer Input Option(01): 7200, 200 mV/mil

• Alarm Relay Option(02): Hermetically-Sealed
• Agency Approval Option(00): Not Required
• Safety Barrier Option(00): None
• Trip Multiply Option(01): 2X


Configuration:
• Minimum Operating Frequency (RPM): 600

• Angular Range of Operation (Degrees from Zero): 0° ±100°
• Mounting Base Option: No Mounting Base
• Connector Mounting Option: Terminal Block, Top Mounted

Part Numbers: 125792-01B, 125794-01, 126398-01F, 125792-01C
Configuration:
• Transducer Mounting Angle: 0° ± 100°
• Minimum Operating Frequency: 10Hz (600cpm)

• Mounting Base Option: No Mounting Base, 1/2-in 20 UNF-3A Stud
• Connector Option: Terminal Black Top Mount
• Agency Approval Option: No Approvals Required

Configuration:
• Cable Length: 4.00 meters (157 in)
• Armor Option: Without Armor
Showing 1-100 of 531 Results
Contact Us
Fax:

(240) 376-1381