Items/Page
Showing 1-100 of 238 Results
Battery is used.

Part Number: IC693PWR321AA, IC693PWR321N, IC693PWR321W, IC693PWR321Y, IC693PWR321T, IC693PWR321CA
This GE Fanuc IC693CMM321-JJ Series 90-30 PLC Ethernet TCP/IP Module is used and in excellent condition.

P/N: IC693CMM321-JJ
This GE Fanuc IC610CHS110A 5-Slot Rack with High Capacity Power Supply is used and in excellent condition.

Configuration:
• Output: 24 VDC

• Input: 115 / 230 VAC


This GE Fanuc IC609SJR100C Series One Junior Basic Unit is new from surplus stock. This unit ships with standard accessories and documentation in manufacturer's box. Controller board sold separately.

Part Number(s): IC609SJR100C, GEJ-6050A

This GE Fanuc IC693CMM321-EE Series 90-30 PLC Ethernet TCP/IP Module is used and in excellent condition.

P/N: IC693CMM321-EE
This GE Fanuc HEPCX693 Communications Card is used and in excellent condition.
This GE Fanuc IC610CPU101C PLC Module is used and in excellent condition. This unit has an on board battery, which has unknown remaining life.
This unit has a broken front cover and lower front post, which will not affect the operation of the unit.

Horner Electronics is the original manufacturer.
Configuration:
• 24 VDC Input
\• Negative Logic (16 Points)

Part Number: IC693MDL644B
Configuration:
• 12/24 VDC output
• Positive Logic (16 Points)

Part Number: IC693MDL740C
This unit is missing the front cover for the 15-pin connector; however, this does not effect the functionality. Battery is used.

Part Number: IC693PWR321K, IC693PWR321M, IC693PWR321N, IC693PWR321S, IC693PWR321R, IC693PWR321X

This GE Fanuc A0R16G Relay Output Module is new from surplus stock. This unit ships in manufacturers plastic case.

Part Number: A03B-0807-C161
Configuration:
• 12/24 VDC Output
• Positive Logic (32 Points)

Part Number: IC693MDL753G
This GE Fanuc IC660ELB921 Single-Channel Genius I/O PCIM is used and in excellent condition. This PC Interface Module was modified by the end user to hold (1) MicroGENI daughterboard and operate as a channel PCIM module.

PCIM Part Number: HE660ELB100D
MicroGENI Daughterboard Part Number: IC660ELB912

This unit has a minor scratch on the display. However this does affect its functionality in any way.

Part Number: DP021250

Configuration:

• Intel Pentium III 1 GHz Processor
• 40 GB HDD
• 128 MB RAM
• Windows 2000 Operating System
• Entellisys Version 4.01 Installed
• Touchscreen Display

View Photo of Front Connector

View Photo of IDE Connectors

View Photo of Ethernet Connector

This GE Fanuc IC693APU302 Power Mate 2-Axis APM Module is used and in excellent condition.

Configuration:
• 120/240 VAC Output
• 8 Points

Part Number: IC693MDL330F
This unit has a chipped housing; however, this will not prevent it from functioning properly. Battery is used.

Part Number: IC693PWR321N


View a Representative Photo of the chipped housing.

Part Number: IC693CHS391, IC693CHS391L, IC693CHS391M, IC693CHS391K, IC693CHS391C, IC693CHS391N, IC693CHS391G
This GE Fanuc IC610MDL129A 16-Point 115VAC Input Module is used and in excellent condition.

Key not included.

Configuration:
• 32 K User Memory

Part Number: IC693CPU350-BD
Key not included.

Configuration:
• 32 K User Memory

Part Number: IC693CPU350-CE
This GE Fanuc IC693UAA003BP1 Series 90 Micro Programmable Controller is used and in excellent condition.

Configuration:

• Inputs: Eight AC Inputs
• Outputs: Six AC Outputs
• Range: 100-15% to 240+10% VAC
• Frequency: 50-5% to 60+5% Hz
• Hold-Up: 10 ms at 85 VAC

Model: IC693UAA003BP1

This GE Fanuc IC609SJR120C Series One Junior Basic Unit is used and in excellent condition. Controller board sold separately.

Part Number(s): IC609SJR120C
This GE Fanuc IC693CPU331 Series 90-30 CPU Module is used and in excellent condition.

P/N: IC693CPU331J, IC693CPU331X, IC693CPU331K, IC693CPU331M, IC693CPU331U, IC693CPU331-CE, IC693CPU331-AA, IC693CPU331-AB

Configuration:
• 240K User Memory

Part Number: IC693CPU374-JY, IC693CPU374-HX
This GE Fanuc A20B-0007-0010/06C 6A Masterboard is used and in excellent condition.

Configuration:
• Software: 99x

• Maximum Memory: 320 Meters
This unit does not have a front panel cover.

View Photo of control module interface.

Part Number: IC693CMM311F, IC693CMM311G, IC693CMM311L, IC693CMM311N, IC693CMM311M, IC693CMM311H

This unit features a 3V internal battery source and does not have a front panel cover.

View Photo of interface and battery.

Part Number: IC693CMM311F

This GE Fanuc Panel C 15" Flat Panel Computer is used and in excellent condition. This unit is missing the front connector door. However this does affect its functionality in any way.

Part Number: DP021250

Configuration:
• Intel Pentium III 1 GHz Processor
• 40 GB HDD
• 128 MB RAM
• Windows 2000 Operating System
• Entellisys Version 4.01 Installed
• Touchscreen Display

View Photo of Front Connector

View Photo of IDE Connectors

View Photo of Ethernet Connector

This GE Fanuc IC697ALG441 Voltage Expander Module is new from surplus stock. This unit ships in the original manufacturer's packaging.
This GE Fanuc IC610CHS111A 5-Slot Rack with High Capacity Power Supply is used and in excellent condition.
Configuration:
• 24 VDC Input

• Negative / Positive Logic (16 Points)

Part Number: IC693MDL645A, IC693MDL645B, IC693MDL645D

Configuration:
• 12/24 VDC Output
• Positive Logic (32 Points)

Part Number: IC693MDL753G
This GE Fanuc IC609SJR120C Series One Junior Basic Unit is used and in good condition. The access cover is missing. Controller board sold separately.

Part Number(s): IC609SJR120C
This unit has a cracked front cover, which will not affect the operation of the unit.

Configuration:

• 12/24 VDC output
• Positive Logic (16 Points)

Part Number: IC693MDL740C

Configuration:
• 24 VDC Input
• Negative / Positive Logic (32 Points)

Part Number: IC693MDL655F
This GE Fanuc Series One 5-Slot Rack with High Capacity Power Supply is used and in excellent condition. This module is also known as the DirectLogic D3-05B-1, Siemens Simantic 305-02B, or Koyo E-02B.
It is missing the front plastic cover and their is a chip in the housing; however, it will still function properly.

Configuration:
• 120/240 VAC Output
• 8 Points

View Photo of chip in housing.

Part Number: IC693MDL330F

Part Numbers: DP021250, DP02250, D021250

Configuration:
• Intel Pentium III 1 GHz Processor
• 40 GB HDD
• 128 MB RAM

• Windows 2000 Operating System
• Entellisys Version 4.01 Installed
• Touchscreen Display

View Photo of Front Connector

View Photo of IDE Connectors

View Photo of Ethernet Connector

This unit has no PCI / ISA module installed.

Part Numbers: DP021250, DP02250

Configuration:
• Intel Pentium III 750 MHz - 1 GHz Processor

• 40 GB HDD
• 128 MB RAM
• Windows 2000 Operating System
• Entellisys Version 4.01 Installed
• Touchscreen Display

View Photo of Front Connector

View Photo of IDE Connectors

View Photo of Ethernet Connector

This GE Fanuc IC697VRM015 Fiber-Optic Reflective Memory with Interrupts is new from surplus stock.

Configuration:

• Memory: 256 KB Reflective Memory (SRAM)

Part Number: 332-000430-000 B

This GE Fanuc IC697CMM711 Communications Coprocessor Module is used and in excellent condition.

Configuration:
• Memory: 128 KB SRAM

• Processor: Intel 80C186
• Processor Speed: 12 MHz


This does not come in the travel case. It ships as photoed.
This GE Fanuc Genius IC660EBD110M 115 VAC 16-Circuit Discrete Input Block Electronics Assembly is used and in excellent condition.
The front panel terminal block is missing.

Configuration:
• 24 VDC Input

• Negative / Positive Logic (16 Points)

Part Number: IC693MDL645A, IC693MDL645B, IC693MDL645D

Configuration:
• 5/12/24V DC Output
• Negative Logic (32 Points)

Part Number: IC693MDL752E
Battery is used. This module comes with a PCM communications cable.

Part Number: IC693PCM300C, IC693PCM300D
This unit is missing the battery compartment cover; however, this will not prevent it from functioning.

Part Number: IC693PWR330H


View Photo of missing battery compartment cover.

This unit does not have the front cover panel.

Configuration:
• 24 VDC Input

• Negative / Positive Logic (32 Points)

Part Number: IC693MDL655E

This unit has a chipped PCB; however, this does not affect its ability to function properly.

Configuration:

• Processor: OCTEON CN3850-SCP, 12-core; 500 MHz
• SIMMS: None Installed
• SFP Modules: None Installed

View Photo of chipped PCB.

Part Number: 87002020-R011

This GE Fanuc IC610MDL107 16-Point 24VDC Current Sourcing Input Module is new from surplus stock. This module is also known as the DirectLogic D3-16ND2-1, Siemens Simatic 305-05N, or Koyo E-05N.
This GE Fanuc IC697PWR710 PLC Power Supply is used and in excellent condition.

Input Power: 120/240 VAC, 125 VDC
This unit does not include a power supply. This unit is missing the front connector door. However this does affect its functionality in any way.

Part Numbers: DP021250, DP02250


Configuration:
• Intel Pentium III 1 GHz Processor
• 40 GB HDD
• 128 MB RAM
• Windows 2000 Operating System
• Entellisys Version 4.01 Installed
• Touchscreen Display

View Photo of Front Connector

View Photo of IDE Connectors


This GE Fanuc HMPK Module is used and in excellent condition. This unit has the DMPK Module, Part Number: DS3800DMPK1E1D.

Part Number: DS3800HMPK1K1K
Configuration:
• Relay Output
• 16 Points

Part Number: IC693MDL940C, IC693MDL940D, IC693MDL940H, IC693MDL940F
This GE Fanuc IC697CMM741H Ethernet Controller is new from surplus stock. This unit ships in the manufacturer's box and static bag with standard documentation.
This GE Fanuc Genius IC660 CBD100 115 VAC I/O Block is new from surplus stock.

CBD100

• Input voltage: 115V

• Dimension: 8.83 x 3.5 x 3.94 inches
• Weight: 4 lbs

This unit is missing the front connector door. However this does affect its functionality in any way.

Configuration:
• Intel (R) Mobile 1.6 GHz Processor

• No HDD Installed
• 1 GB RAM
• No Operating System

View Photo of Front Connector

View Photo of Serial Connectors

This unit does not have the front panel terminal block.

Configuration:
• Relay Output

• 16 Points

Part Number: IC693MDL940C, IC693MDL940D, IC693MDL940H, IC693MDL940F

This unit is missing a front panel cover, however, this will not prevent it from functioning properly.

P/N: IC693CMM321-EE
This unit does not have a faceplate cover.

Configuration:
• 24 VDC In (Positive / Negative) RelayOut

• 120 VAC Power Supply
This GE Fanuc IC697BEM711M Bus Receiver is new from surplus stock. This unit ships in the manufacturer's original packaging.
This GE Fanuc IC655PER500B Operator Interface Unit is used and in excellent condition.
This GE Fanuc IC300OCS200G Operator Control Station is used and in excellent condition. This unit includes an IC300DIQ722A SmartStack 14/10 Point Digital I/O installed.

This GE Fanuc IC600YB831 High-Density Input Module is used and in excellent condition.

Part Number: IC600YB831A, IC600YB831B, IC600BF831B
This GE Fanuc IC697CPU772 PLC CPU is used and in excellent condition. Battery is used.

IC697CPU772 Configuration:
• Processor Speed: 12 MHz, 80C186 Microprocessor

• Floating Point Math
• RS-485 Compatible Serial Port
• Analog I/O: Up to 8 KB
• Option Board IC697MEM717: 256 KB CMOS Expansion Memory

Part Number: IC697CPU772

GE Fanuc IC697CPU772 Datasheet (pdf)

Configuration:
• 24 VDC Input
• Negative / Positive Logic (16 Points)

Part Number: IC693MDL646B, IC693MDL646C
This GE Fanuc IC610MDL176A Isolated AC Output Module is used and in excellent condition.
This GE Fanuc IC600CB537M Communications Control Module Type 3 is used and in excellent condition.

Configuration:

• Protocol: Remote Terminal Unit (RTU) Slave

Part Number: 44A720886-001

This GE Fanuc IC600BF904K AC Output Module is used and in excellent condition. This unit does not have a faceplate.

Configuration:
• 115 Vac

Part Number: IC600BF904K, IC600YB904K

This GE Fanuc Genius IC660BBD025 5/12/24 VDC 32-Circuit Sink Block is used and in excellent condition.

Configuration:

• Terminal Assembly: IC660TBD025B
• Electronics Assembly: IC660EBD025B

Configuration:
• CPU: RS485 and Multi-Mode ST 100Base-FX
• Software: No Software Options

• Mount: Horizontal (19" Rack)
• Display: English
• Power Supply: 125 / 250 VAC/VDC
• CT/VT Modules: Standard 4CT/4VT
• Digital Inputs/Outputs: 6 Form-A (No Monitoring) Outputs, 4 Digital Inputs

Part Number: D60J00HCHF8FH6UM6UPXXUXXWXX

This GE Fanuc Motion Mate DSM302 Digital Motion Controller is used and in excellent condition.

The DSM302 Module is a two-axis motion control module, which is highly integrated with
the logic solving and communications functions of the IC693 PLC. Two primary control loop configurations are provided: Standard mode and Follower mode.

Configuration:

• DSP Gives Vector Control of GE Fanuc AC Servos
• Servo Loop Update: 250 µs (Torque), 1 ms (Velocity), 2 ms (Position)
• Block Processing Time Under 5 ms
• Velocity Feed Forward and Position Error Integrator
• High Resolution of Programming Units

Part Number: IC693DSM302-AE

This GE Fanuc IC600CB503A I/O Control Module is used and in excellent condition. This unit does not have a faceplate; however, this does not affect its functionality.

Part Number: 44A712769-002
This GE Fanuc Motion Mate DSM314 Digital Motion Controller is used and in excellent condition.

The DSM314 Motion Mate Module, is a multi-axis motion control module. Two primary
control loop configurations are provided: Standard mode and Follower mode.

Configuration:

• 1 to 4-Axis Motion Programs
• 13 bit Analog Output can be Controlled by PLC or Used as Digital Servo Tuning Monitor
• Non-Volatile Storage for 10 Programs and 40 Subroutines
• Velocity Feed Forward and Position Error Integrator
• High Resolution of Programming Units

Part Number: IC694DSM314-AA

This GE Fanuc IC600BF800K I/O Receiver Module is used and in excellent condition. This unit does not have a faceplate; however, this will not prevent it from functioning properly.

Part Numbers: 44A296391-001, 44A297020-G01

This GE Fanuc IC600BF802K AC/DC Input Module is used and in excellent condition. This unit does not have a faceplate; however, this will not prevent it from functioning properly.

Configuration:
• 24-48 Vac/dc

Part Number: IC600BF802K, IC600YB802K

This GE Fanuc IC600BF804K AC/DC Input Module is used and in excellent condition. This unit does not have a faceplate; however, this will not prevent it from functioning properly.

Configuration:
• 115 Vac/dc

Part Number: IC600BF804K, IC600YB804K

Configuration:
• 120 VAC Input
• 16 Points

Part Number: IC693MDL240E
This GE Fanuc IC610CPU105A PLC Module is used and in excellent condition. This unit has an on board battery, which has unknown remaining life.
This GE Fanuc IC610CPU105B PLC Module is used and in excellent condition. This unit has an on board battery, which has unknown remaining life.
This GE Fanuc IC610MDL100A Filler Module is used and in excellent condition.
This GE Fanuc IC610MDL151 8-Point 5-24 VDC Current Sinking Output Module is used and in excellent condition. This module is also known as the DirectLogic D3-08TD1, Siemens Simatic 305-10T, or Koyo E-10T.
This GE Fanuc IC610MDL157 24 VDC Output Module is used and in excellent condition. This module is also known as the DirectLogic D3-16TD1-1, Siemens Simatic 305-15T, or Koyo E-15T.
This GE Fanuc IC610MDL158 16-PT 5-24VDC Current Sourcing Output Module is used and in excellent condition. It is also known as the DirectLogic D3-16TD2, the Siemens Simatic 305-55T, or the Koyo E-55T.
This GE Fanuc IC610MDL157B 24 VDC Sink Output Module is used and in excellent condition.

This GE Fanuc IC610MDL175 115/230VAC Output Module is used and in excellent condition. This module is also known as the DirectLogic D3-08TA-2, Siemens Simatic 305-20T, or Koyo E-20T.

GE Fanuc IC610MDL175 Datasheet (pdf)

Showing 1-100 of 238 Results
Contact Us
Fax:

(240) 376-1381