Inficon
This Inficon IC-6000 OSC S / S Card is used and in excellent condition.
Part Number: 205-340-B
Part Number: 205-340-B
This Inficon XTC Thin Film Thickness and Rate Monitor is used and in excellent condition. This unit does not include rackmount handles.
Configuration:
(...) • Thickness Display Range: 0 - 999.9 kÅ
• Rate Display and Control Range: 0 - 999.9 Å/sec
• Measurement and Control Update Period: 0.25 sec
• Shutter Delay: ±5% of Rate Set Point
• Power Requirements: 120 / 240 V (+5, -25%), 50 - 60 Hz, 50 VA
• Operating Temperature: 0 - 50°C
Part Number: 751-001-G1
Configuration:
(...) • Thickness Display Range: 0 - 999.9 kÅ
• Rate Display and Control Range: 0 - 999.9 Å/sec
• Measurement and Control Update Period: 0.25 sec
• Shutter Delay: ±5% of Rate Set Point
• Power Requirements: 120 / 240 V (+5, -25%), 50 - 60 Hz, 50 VA
• Operating Temperature: 0 - 50°C
Part Number: 751-001-G1
This Inficon IC-6000 Vacuum Deposition Controller is used and in excellent condition.
Includes:
• (1) OSC Source S/S Card
• (2) I/O Cards
Includes:
• (1) OSC Source S/S Card
• (2) I/O Cards
This is a demo unit that was installed but never put into commission.
Configuration:
•Measurement Channels: 3
(...) •Display: LCD
•Display Range, mbar: 5x10-10...1500
•Display Range, Torr: 3.75x10-10...1125
•Setpoint Relays: 6
Input Voltage: 90-250V~
Part Number: 398-021
Configuration:
•Measurement Channels: 3
(...) •Display: LCD
•Display Range, mbar: 5x10-10...1500
•Display Range, Torr: 3.75x10-10...1125
•Setpoint Relays: 6
Input Voltage: 90-250V~
Part Number: 398-021
This Inficon IPN 013-001 Oscillator is used and in excellent condition. It comes with a 6 in OSC cable, part number IPN 013-070.
This Inficon XTM Thin Film Deposition Monitor is used and in excellent condition. This unit includes a D/A cable.
Part Number: 353-502
This Inficon XTC Thin Film Thickness and Rate Monitor is used and in excellent condition. This unit comes with the 007-251 oscillator kit and extra BNC cables.
Configuration:
(...) • Thickness Display Range: 0 - 999.9 kÅ
• Rate Display and Control Range: 0 - 999.9 Å/sec
• Measurement and Control Update Period: 0.25 sec
• Shutter Delay: ±5% of Rate Set Point
• Power Requirements: 120 / 240 V (+5, -25%), 50 - 60 Hz, 50 VA
• Operating Temperature: 0 - 50°C
View Photo of oscillator kit.
View Photo of extra BNC cables.
Part Number: 751-001-G1
Configuration:
(...) • Thickness Display Range: 0 - 999.9 kÅ
• Rate Display and Control Range: 0 - 999.9 Å/sec
• Measurement and Control Update Period: 0.25 sec
• Shutter Delay: ±5% of Rate Set Point
• Power Requirements: 120 / 240 V (+5, -25%), 50 - 60 Hz, 50 VA
• Operating Temperature: 0 - 50°C
View Photo of oscillator kit.
View Photo of extra BNC cables.
Part Number: 751-001-G1
This Inficon IC-6000 Vacuum Deposition Controller is used and in excellent condition.
Includes:
• (1) Interface Card
• (4) OSC Source S/S Cards
(...) • (2) I/O Cards
• (1) DAC Card
Includes:
• (1) Interface Card
• (4) OSC Source S/S Cards
(...) • (2) I/O Cards
• (1) DAC Card
This Inficon 007-029 Remote Oscillator Cable Assembly is used and in excellent condition.
This Inficon XMS-1 Deposition Controller is used and in excellent condition.
Configuration:
• Thickness Measurement Range: 0 tp 999.9 kÅ
(...) • Rate Control Range: 0 to 999 Å/second
• Rise Time: 0.1 to 99.9 minutes
• Power: ±10%, 115 / 230 VAC, 50-60 Hz, 70 Watts
• Instrument Operating Temperature: 0 to 50°C
• Sensor Head Operating Temperature: -20 to 105°C
Configuration:
• Thickness Measurement Range: 0 tp 999.9 kÅ
(...) • Rate Control Range: 0 to 999 Å/second
• Rise Time: 0.1 to 99.9 minutes
• Power: ±10%, 115 / 230 VAC, 50-60 Hz, 70 Watts
• Instrument Operating Temperature: 0 to 50°C
• Sensor Head Operating Temperature: -20 to 105°C
This Inficon IC-6000 Vacuum Deposition Controller is used and in excellent condition.
Includes:
• (2) OSC Source S/S Cards
(...) • (1) I/O Card
Part Numbers: 013-075
Includes:
• (2) OSC Source S/S Cards
(...) • (1) I/O Card
Part Numbers: 013-075
This Inficon XTC Thin Film Thickness and Rate Monitor is used and in excellent condition. This module is a combination of (2) Inficon XTC Controllers. These controllers can be sold separately if(...) required. Please contact Artisan Technology Group sales for pricing and availability.
Configuration:
• Thickness Display Range: 0 - 999.9 kÅ
• Rate Display and Control Range: 0 - 999.9 Å/sec
• Measurement and Control Update Period: 0.25 sec
• Shutter Delay: ±% of Rate Set Point
• Power Requirements: 120 / 240 V (+5, -25%), 50 - 60 Hz, 50 VA
• Operating Temperature: 0 - 50°C
Part Number: 751-001-G1
Configuration:
• Thickness Display Range: 0 - 999.9 kÅ
• Rate Display and Control Range: 0 - 999.9 Å/sec
• Measurement and Control Update Period: 0.25 sec
• Shutter Delay: ±% of Rate Set Point
• Power Requirements: 120 / 240 V (+5, -25%), 50 - 60 Hz, 50 VA
• Operating Temperature: 0 - 50°C
Part Number: 751-001-G1
This unit includes a DN 40 CF-R Flange.
Configuration:
• Seal with Center Ring and Filter
BPG400 Part Number: 353-502
Sensor Part Number: 354-491
Configuration:
• Seal with Center Ring and Filter
BPG400 Part Number: 353-502
Sensor Part Number: 354-491
This Inficon IC-6000 Vacuum Deposition Controller is used and in excellent condition.
Includes:
• (3) OSC Source S/S Cards
• (1) I/O Card
(...) • (1) DAC Card
Includes:
• (3) OSC Source S/S Cards
• (1) I/O Card
(...) • (1) DAC Card
This Inficon IC-6000 Vacuum Deposition Controller is used and in good condition. The monitor does not work on the unit; however, the unit functions appropriately when attached to an external(...) monitor.
Includes:
• (1) E/D and I/O Switch Card
Includes:
• (1) E/D and I/O Switch Card
This Inficon IC-6000 Vacuum Deposition Controller is used and in good condition. The monitor does not work on the unit; however, the unit functions appropriately when attached to an external(...) monitor.
Includes:
• (1) OSC Source S/S Card
• (1) I/O Card
Includes:
• (1) OSC Source S/S Card
• (1) I/O Card
This Inficon XTC Thin Film Thickness and Rate Monitor is used and in good condition. This unit is missing the prop stand. This unit does not include rackmount handles.
(...)
Configuration:
• Thickness Display Range: 0 - 999.9 kÅ
• Rate Display and Control Range: 0 - 999.9 Å/sec
• Measurement and Control Update Period: 0.25 sec
• Shutter Delay: ±5% of Rate Set Point
• Power Requirements: 120 / 240 V (+5, -25%), 50 - 60 Hz, 50 VA
• Operating Temperature: 0 - 50°C
View Photo missing prop stand.
Part Number: 751-001-G1
(...)
Configuration:
• Thickness Display Range: 0 - 999.9 kÅ
• Rate Display and Control Range: 0 - 999.9 Å/sec
• Measurement and Control Update Period: 0.25 sec
• Shutter Delay: ±5% of Rate Set Point
• Power Requirements: 120 / 240 V (+5, -25%), 50 - 60 Hz, 50 VA
• Operating Temperature: 0 - 50°C
View Photo missing prop stand.
Part Number: 751-001-G1
This Inficon XTC Thin Film Thickness and Rate Monitor is used and in good condition. This unit has a dent on the front panel and is missing the prop stand. This unit does not include rackmount(...) handles.
Configuration:
• Thickness Display Range: 0 - 999.9 kÅ
• Rate Display and Control Range: 0 - 999.9 Å/sec
• Measurement and Control Update Period: 0.25 sec
• Shutter Delay: ±5% of Rate Set Point
• Power Requirements: 120 / 240 V (+5, -25%), 50 - 60 Hz, 50 VA
• Operating Temperature: 0 - 50°C
View Photo dent on faceplate.
View Photo missing prop stand.
Part Number: 751-001-G1
Configuration:
• Thickness Display Range: 0 - 999.9 kÅ
• Rate Display and Control Range: 0 - 999.9 Å/sec
• Measurement and Control Update Period: 0.25 sec
• Shutter Delay: ±5% of Rate Set Point
• Power Requirements: 120 / 240 V (+5, -25%), 50 - 60 Hz, 50 VA
• Operating Temperature: 0 - 50°C
View Photo dent on faceplate.
View Photo missing prop stand.
Part Number: 751-001-G1
This Inficon BPG402-SP Bayard-Alpert Pirani ATM to Ultra-High Vacuum Gauge is used and in excellent condition.
Configuration:
(...) • Profibus
• DN 25 ISO-KF
Part Number: 353-574
Configuration:
(...) • Profibus
• DN 25 ISO-KF
Part Number: 353-574
This Inficon IC-6000 I / O card is used and in excellent condition.
Part Numbers: 205-350-B, 205-350-D, 205-350-E, 205-350-F
Part Numbers: 205-350-B, 205-350-D, 205-350-E, 205-350-F
Configuration:
• CPU: Z0840004PSC
Part Number: 017-332
• CPU: Z0840004PSC
Part Number: 017-332
This Inficon IC-6000 RS-232C Card is used and in excellent condition.
Part Number: 205-460E
Part Number: 205-460E
This Inficon IC-6000 Vacuum Deposition Controller Power Supply is used and in good condition. The power outlet is damaged but it does not effect functionality.
(...) View Photo of power outlet.
(...) View Photo of power outlet.
Loading Next...