The 7035 9-Bank Multiplexer Card has nine 1x4 multiplexers. The switch contact configuration for each channel is 2-pole form A. The card's nine banks can be combined for a wide variety of switching configurations using external connections. This flexibility makes the Model 7035 well-suited for production testing of a variety of telecommunications products and systems and low power portable devices.
Features of the scanner include a low offset current error (<1pA specified, <30fA typical). The 7158 Low Current Scanner Card includes switching of AC or DC signals up to 100mA. This model provides BNC input and output connectors. Two outputs allow daisy-chaining of Model 7158 cards. This unit is configurable for low current or low voltage switching.
Each channel on the Model 7158 has a pair of single-pole single-throw (SPST), normally open (NO) relays. The relay pair switches signal HI between signal IQ (analog ground) and output HI. Signal LO (outside shell of the BNC) is common to all channels and outputs in the system
This Keithley DAS-1802ST-DA 12-Bit Multifunction I/O Board is used and in excellent condition.
Installed Option:
DA: Adds Digital to Analog Output
Part Number: DAS-1802ST-DA • Analog Inputs: 16 Single-Ended / 8 Differential • Gain-Channel Queue Length: 256 • Option DA: Adds (4) Digital to Analog Output
The 7011 Multiplexer Card has four independent banks of 1 x 10, 2-pole channel switching that can be combined for a wide variety of configurations-dual 1 x 20, a 1 x 10 plus 1 x 30, or one large 1 x 40-channel multiplexer. These cards will automatically configure the Model 7001 or 7002 mainframe. Each multiplexer output connects to the 7001/7002 analog backplane through removable jumpers for even greater flexibility.
This Keithley DAS-1802HR-DA 16-Bit Multifunctional I/O Board is new from surplus stock. This unit ships in the manufacturer's packaging with standard documentation and accessories.
Installed Option:
DA: Adds Digital to Analog Output
Part Number: DAS-1802HR-DA • Analog Inputs: 16 Single-Ended / 8 Differential • Gain-Channel Queue Length: 256 • Option DA: Adds (4) Digital to Analog Output
The 7001 is a half-rack, high density, two-slot mainframe that supports the widest range of signals in the test and measurement industry. DC switching capabilities from nanovolts to 1100V and femtoamps to 5A, as well as RF and optical switch support, make the 7001 a versatile production test tool for a wide array of applications.
Rackmount Chassis
Designed to fit into a 19 inch rack, this unit requires an extended rack mount tab to fill the rack. This extended rack mount tab is not included.
The 7011-C has a 96-pin mass terminated connector. The 7011 Multiplexer Card has four independent banks of 1 x 10, 2-pole channel switching that can be combined for a wide variety of configurations-dual 1 x 20, a 1 x 10 plus 1 x 30, or one large 1 x 40-channel multiplexer. These cards will automatically configure the Model 7001 or 7002 mainframe. Each multiplexer output connects to the 7001/7002 analog backplane through removable jumpers for even greater flexibility.
The 7001 is a half-rack, high density, two-slot mainframe that supports the widest range of signals in the test and measurement industry. DC switching capabilities from nanovolts to 1100V and femtoamps to 5A, as well as RF and optical switch support, make the 7001 a versatile production test tool for a wide array of applications.
This unit ships in the original manufacturer's packaging, with standard documentation and accessories. The item is for sale as pictured. View Photo of the documentation and accessories included in the packaging.
The 7056 is a 10-channel scanner card with electrical connection made through a quick disconnect screw terminal card (Model 7055). It is a cost-effective and versatile solution to relay switching applications. Each channel of the card has two Form A (SPNO) contacts. The switch can be wired for either 2-pole or 1-pole switching through the selection of the appropriate output. In 1-pole operation, channels HI and LO operate as independent, isolated inputs, thereby effectively doubling the number of input channels. In 20 channel mode, use as a one of 20 channel selector switch.
This unit has a chipped connector, which does not affect the operation. The 7011-MTC-2 is a 2m (6.6 ft) mass terminated cable assembly for connection to 7011-C and other switch cards. The cable has 45 pairs with outer shield. The cable is terminated at each end with 96-pin female DIN connectors with strain relief.
This unit does not include the light pen. It can be purchased here, Item Number: 7078-PEN. The 7002 Switch System is a 10-slot mainframe that supports up to 400 2-pole multiplexer channels or 400 matrix crosspoints. The front panel includes a unique interactive display of channel status for quick programming. Scanning speeds of up to 165 channels per second are possible with the high density switch cards. The wide selection of more than 30 different switch cards makes the 7002 one of the most flexible switching mainframes available.
The 7011-MTC-2 is a 2m (6.6 ft) mass terminated cable assembly for connection to 7011-C and other switching cards. The cable has 45 pairs with outer shield. The cable is terminated at each end with 96-pin female DIN connectors with strain relief.
This unit shows wear on the connector, which does not affect the operation. The 7011-MTC-2 is a 2m (6.6 ft) mass terminated cable assembly for connection to 7011-C and other switch cards. The cable has 45 pairs with outer shield. The cable is terminated at each end with 96-pin female DIN connectors with strain relief.
View Photo of an example of wear on the connector.
This Keithley KPCI-1801HC PCI Bus Data Acquisition Board is new from surplus stock. This unit ships in the manufacturer's packaging with standard documentation and accessories. Part Number: KPCI1801HC-102-06F
This unit ships with standard documentation and accessories. Features of the scanner include a low offset current error (<1pA specified, <30fA typical). The 7158 Low Current Scanner Card includes switching of AC or DC signals up to 100mA. This model provides BNC input and output connectors. Two outputs allow daisy-chaining of Model 7158 cards. This unit is configurable for low current or low voltage switching.
Each channel on the Model 7158 has a pair of single-pole single-throw (SPST), normally open (NO) relays. The relay pair switches signal HI between signal IQ (analog ground) and output HI. Signal LO (outside shell of the BNC) is common to all channels and outputs in the system
This Keithley 2520 Pulsed Laser Diode Testhead is used and in excellent condition. This unit's 14526-EZLB-2000OSC Cable has a cracked connector which does not affect functionality. Includes: • Keithley CA-265-1B Cable, 6.5 ft. (1.98 m) • 14526-EZLB-2000OSC Cable, 7 ft. (2.13 m)
The 7012-C assembly consists of a multi-pin (mass termination) connector card and the relay card. External test circuit connections to the matrix are made via the 96-pin male DIN connector on the connector card.
This Keithley SSIO-24 24-Channel Solid-State I/O Module Board is new from surplus stock. This unit ships in the original manufacturer's box with a driver CD. Cable sold separately.
The 706 is an IEEE-488 bus compatible scanner that can accommodate ten plug-in scanner cards. The front panel controls are clearly marked and easy to use. These controls serve several functions such as opening a selected channel, closing the channel, scanning a selectable first and last channel, selecting scan rate and mode.
Suggested replacement for the 706 Chassis is the Keithley 7002 400-Channel / 10-Slot Switch Mainframe.
The 706 is an IEEE-488 bus compatible scanner that can accommodate ten plug-in scanner cards. The front panel controls are clearly marked and easy to use. These controls serve several functions such as opening a selected channel, closing the channel, scanning a selectable first and last channel, selecting scan rate and mode.
Suggested replacement for the 706 Chassis is the Keithley 7002 400-Channel / 10-Slot Switch Mainframe.
The 7035-MTC-2 is a 2m (6.6 ft) mass terminated cable assembly for connection to 7035. The cable has 45 pairs with outer shield. The cable is terminated at each end with 96-pin female DIN connectors with strain relief.
This unit does not include the handle part number 428-329F. The 7001 is a half-rack, high density, two-slot mainframe that supports the widest range of signals in the test and measurement industry. DC switching capabilities from nanovolts to 1100V and femtoamps to 5A, as well as RF and optical switch support, make the 7001 a versatile production test tool for a wide array of applications.
The 7052 is a general-purpose switching card. The flexibility of matrix switching allows connection of any row to any column, singly or in combination. Ideal for complex signal and measurement device switching, this matrix card can help minimize your need for custom cables and patch panels because the routings can be customized in software. Switched guards assure high isolation between channels.
The 7058 is intended for high-quality switching of sensitive signal levels for up to 10 channels. The card is designed to introduce minimal offset current error (under 1pA). Guarding ensures that high isolation (1015Ω) is maintained between input HI to input HI. A contact life of >10,000,000 closures cold switching and >1,000,000 closures at maximum signal levels assures reliable operation.
The Model 7058 is engineered to simplify integration into larger test systems for sensitive measurements. Removable jumpers allow channels to be configured as voltage switches. Triaxial input connectors provide better shielding and permit direct connection to Keithley electrometers.
This Keithley DAS-1801HC 12-Bit Multifunctional I/O Board is new from surplus stock. This unit ships in the manufacturer's packaging with standard documentation and accessories.
Part Number: DAS-1801HC • High Channel Count • Analog Inputs: 64 Single-Ended / 32 Differential • Gain-Channel Queue Length: 64 • Digital Inputs: 4 • Digital Outputs: 8