Newport / Klinger
Internal circuitry for the Local Lockout disabled for use without the key.
The local lock-out key is not included.
Input Voltage: 115V
View Photo of the back of the unit.
The local lock-out key is not included.
Input Voltage: 115V
View Photo of the back of the unit.
Configuration:
• Length: Approximately 6 ft
• Length: Approximately 6 ft
Configuration:
• Input: 115 VAC
• IEEE-488 Port
• RS-232-C Port
• Fuse: 3A Fast-Blo
• Input: 115 VAC
• IEEE-488 Port
• RS-232-C Port
• Fuse: 3A Fast-Blo
The local lock-out key is not included.
The local lock-out key is not included.
Display Output connectors are present.
Internal circuitry for the Local Lockout disabled for use without the key.
The local lock-out key is not included.
Input Voltage: 115V
View Photo of the back of the unit.
Internal circuitry for the Local Lockout disabled for use without the key.
The local lock-out key is not included.
Input Voltage: 115V
View Photo of the back of the unit.
Internal circuitry for the Local Lockout disabled for use without the key.
The local lock-out key is not included.
Input Voltage: 115V
View Photo of the back of the unit.
The local lock-out key is not included.
Input Voltage: 115V
View Photo of the back of the unit.
This unit includes a 7-foot adapter cable.
This Newport / Klinger CD4.4 Motor Controller / Driver is used and in excellent condition.
Installed Motor Cards:
• (2) UE-30 200 MA
• (2) UE-72 1.6 AMP
Installed Motor Cards:
• (2) UE-30 200 MA
• (2) UE-72 1.6 AMP
Configuration:
• Length: Approximately 7 ft
• Length: Approximately 7 ft
Display Output connectors are present.
The local lock-out key is included.
Input Voltage: 115V
There is some cosmetic damage to the top of this unit as show here, however this does not affect the functionality of the unit.
View Photo of the back of the unit.
The local lock-out key is included.
Input Voltage: 115V
There is some cosmetic damage to the top of this unit as show here, however this does not affect the functionality of the unit.
View Photo of the back of the unit.
Internal circuitry for the Local Lockout disabled for use without the key.
The local lock-out key is not included.
Input Voltage: 115V
View Photo of the back of the unit.
The local lock-out key is not included.
Input Voltage: 115V
View Photo of the back of the unit.
Configuration:
• Axes W, X, Y, and Z set up for use with motors: UE-30 Motors (Current: 0.2 Amps)
• Axes W, X, Y, and Z set up for use with motors: UE-30 Motors (Current: 0.2 Amps)
Configuration:
• Axis X set up for use with motor: UE-72 Motors (Current: 1.6 Amps)
• Axis X set up for use with motor: UE-72 Motors (Current: 1.6 Amps)
Configuration:
• Axes W and Y set up for use with motors: UE-72 Motors (Current: 4.7 Amps)
• Axes W and Y set up for use with motors: UE-72 Motors (Current: 4.7 Amps)
Configuration:
• Axes W, X, Y, and Z set up for use with motors: UE-72PP Motors (Current: 1.9 Amps)
• (3) DB-15 Input Cables
• Axes W, X, Y, and Z set up for use with motors: UE-72PP Motors (Current: 1.9 Amps)
• (3) DB-15 Input Cables
This Newport / Klinger SA15AN Gimbal Optical Mount is used and in excellent condition.
• Travel, Coarse: 360°
• Travel, Fine (Using Micrometers with 4 mm of Travel): ±1.15°
• Mirror: AAA87-101812-00
• Mirror Diameter: 150 mm
• Mirror Thickness: 30 mm
• Transmitted Beam: 95 mm
• Reflected Beam/Clear Aperture Through Base: 58 mm
• Cover Installed Behind Mirror
Configuration:
• Travel, Coarse: 360°
• Travel, Fine (Using Micrometers with 4 mm of Travel): ±1.15°
• Mirror: AAA87-101812-00
• Mirror Diameter: 150 mm
• Mirror Thickness: 30 mm
• Transmitted Beam: 95 mm
• Reflected Beam/Clear Aperture Through Base: 58 mm
• Cover Installed Behind Mirror
There is a small piece of plastic framing missing from the lock; however, this does not affect the functionality of the unit.
Configuration:
• Input: 115 VAC
• IEEE-488 Port
• RS-232-C Port
• Fuse: 3A Fast-Blo
View Photo of broken lock.
Configuration:
• Input: 115 VAC
• IEEE-488 Port
• RS-232-C Port
• Fuse: 3A Fast-Blo
View Photo of broken lock.
Configuration:
• Axes W, X, Y, and Z set up for use with motors: UE-71 Motors (Current: 1 Amps)
• Axes W, X, Y, and Z set up for use with motors: UE-71 Motors (Current: 1 Amps)
This Newport / Klinger DCS750 3-Axis Motor Controller is used and in excellent condition.
Configuration:
• Axis 1 Motor: UE-42
• Axis 2 Motor: UE-42
• Axis 3 Motor: UE-32
Configuration:
• Axis 1 Motor: UE-42
• Axis 2 Motor: UE-42
• Axis 3 Motor: UE-32
The local lock-out key is included.
Configuration:
• TK2 Talker Board Option: X Axis
Input Voltage: 115V
View Photo of the back of the unit.
Configuration:
• TK2 Talker Board Option: X Axis
Input Voltage: 115V
View Photo of the back of the unit.
The local lock-out key is included.
Configuration:
• Axes X and Y: Motor UE-31 (Current: 0.5 Amps)
• GPI/O Module
• IEEE-488 Module
• RS-232C Module
• Encoder/Pulse Interface Module
Input Voltage: 110 VAC
Configuration:
• Axes X and Y: Motor UE-31 (Current: 0.5 Amps)
• GPI/O Module
• IEEE-488 Module
• RS-232C Module
• Encoder/Pulse Interface Module
Input Voltage: 110 VAC
Configuration:
• Axes W and X set up for use with motor: UE-71 Motors (Current: 1 Amps)
• Axis Y set up for use with motor: UE-73 Motors (Current: 2.9 Amps)
• Axis Z set up for use with motor: UE-30 Motors (Current: 0.2 Amps)
• Axes W and X set up for use with motor: UE-71 Motors (Current: 1 Amps)
• Axis Y set up for use with motor: UE-73 Motors (Current: 2.9 Amps)
• Axis Z set up for use with motor: UE-30 Motors (Current: 0.2 Amps)
This Newport / Klinger SA15AN Gimbal Optical Mount is used and in excellent condition.
• Travel, Coarse: 360°
• Travel, Fine (Using Micrometers with 4 mm of Travel): ±1.15°
• Mirror: 87-101811-03
• Mirror Diameter: 150 mm
• Mirror Thickness: 25.5 mm
• Transmitted Beam: 95 mm
• Reflected Beam/Clear Aperture Through Base: 58 mm
Configuration:
• Travel, Coarse: 360°
• Travel, Fine (Using Micrometers with 4 mm of Travel): ±1.15°
• Mirror: 87-101811-03
• Mirror Diameter: 150 mm
• Mirror Thickness: 25.5 mm
• Transmitted Beam: 95 mm
• Reflected Beam/Clear Aperture Through Base: 58 mm
This unit includes the Male 25-Pin Display Output Connector. The local lock-out key is not included.
View Photo of Male 25-Pin Display Output Connector.
View Photo of Male 25-Pin Display Output Connector.
Configuration:
• Axes W, X, Y, Z set up for use with motor: UE-16CC Motors (Voltage: 12VDC)
• Axes W, X, Y, Z set up for use with motor: UE-16CC Motors (Voltage: 12VDC)
Configuration:
• Axes W, X, Y, and Z set up for use with motors: UE-31 Motors (Current: 0.5 Amps)
• Axes W, X, Y, and Z set up for use with motors: UE-31 Motors (Current: 0.5 Amps)
Configuration:
• Axes W, X, Y and Z set up for use with motors: UE-72 Motors (Current: 1.9 Amps)
• Axes W, X, Y and Z set up for use with motors: UE-72 Motors (Current: 1.9 Amps)
This unit includes an installed bottom fan assembly.
Configuration:
• Axis X set up for use with motor: UE93 (Current 4.9 Amps)
• Axis W set up for use with motor: UE-42CC (Current 10 Amps)
Configuration:
• Axis X set up for use with motor: UE93 (Current 4.9 Amps)
• Axis W set up for use with motor: UE-42CC (Current 10 Amps)
This Newport / Klinger DCS750 2-Axis Motor Controller is used and in excellent condition.
Configuration:
• Axis 1 Motor: UE-72
• Axis 2 Motor: UE-72
Configuration:
• Axis 1 Motor: UE-72
• Axis 2 Motor: UE-72
This Newport / Klinger 87.09.04.103 is the MC1 Programmable Motor Controller Power Supply Board.
This Newport / Klinger 360-Point Rotary Stage is used and in excellent condition.
This Newport / Klinger 87.09.04.106 is the MC1 Programmable Motor Controller Circuit Board.
Part Number: 40002A, 40002F
Part Number: 40002A, 40002F
This is the front panel for the MC4 Stepping Motor Controller Driver.
This Newport / Klinger 87.09.04.120 is the MC1 Programmable Stepping Motor Controller Control Board.
This Newport / Klinger 87.09.05.06 is the MC1 Programmable Stepping Motor Controller Power Supply Module.
This Newport 87.09.05.08 is the MC1 Programmable Stepping Motor Controller RS-232C Board.
This Newport / Klinger 87.09.05.09 is the MC1 Programmable Motor Controller Backplane Board.
This Newport / Klinger 87.09.05.11 is the MC1 Programmable Motor Controller Backplane Bridge Board.
This Newport / Klinger 12-Bit ISA Motor Controller is used and in excellent condition. This unit has (3) DC 12 Modules installed.
This Newport / Klinger 87.09.05.17 is the MC1 Programmable Stepping Motor Controller IEEE-488 Board.
This Newport / Klinger 89.09.05.29 is the MC1 Programmable Motor Controller Backplane Board.
This Newport / Klinger 89.09.05.30 is the MC1 Programmable Stepping Motor Controller Interface Encoder / Pulse Board.
This is also known as the Gaertner CC1.2G. The local lock-out key is included.
Input Voltage: 115V
Input Voltage: 115V
This is the Newport / Klinger MC1 Programmable Stepping Motor Controller GPI/O Board.
This Newport / Klinger 87.09.05.02 is the MC1 Programmable Stepping Motor Controller Front Panel.
These are the Newport / Klinger MC1 Programmable Stepping Motor Controller Rails.
This unit is missing the front panel cover; however, this will not prevent it from functioning properly.
View Photo of the Front Panel.
Configuration:
• Axes X-Z Set Up for Use with Motor: UE-30 Motors (Current: 200mA)
• Axis W Set Up for Use with Motor: UE-72 Motors (Current: 1.6A)
View Photo of the Front Panel.
Configuration:
• Axes X-Z Set Up for Use with Motor: UE-30 Motors (Current: 200mA)
• Axis W Set Up for Use with Motor: UE-72 Motors (Current: 1.6A)
New Arrivals
Newport / Klinger