Items/Page
Showing 1-50 of 108 Results
Pilz PSS 3032 Programmable Safety System Fail-Safe Module
The Pilz PSS 3032 is a compact safety system within a single housing. Connections are made via screw terminals. The system can be connected to other controller types via I/Os or via a serial(...) interface. Safety systems in the PSS-range are divided into a failsafe section and a standard section. Safety-related functions can only be processed through the failsafe section. The failsafe and standard sections communicate without feedback, i.e. potential program errors in the standard section will not affect the safety section. The failsafe section of the CPU operates through three diverse channels, ensuring a high level of safety. All inputs and outputs are processed separately by each channel. Each channel compares the result with the two adjacent channels. Input and output signals are only valid if all three channels reach the same result (3oo3). The PSS 3032 has an integral Flash-EPROM program memory with 64 KByte for both the standard and failsafe section. The unit has two serial interfaces: an RS 232 interface that is available to the user, and an RS 485 that is used for programming.

Pilz PSS 3032 Datasheet (pdf)
Pilz PSS 3032 Installation Manual (pdf)

Pilz PSS SB DI16 Digital I/O Module
This Pilz PSS SB DI16 Digital I/O Module is used and in excellent condition.

Configuration:
• Digital Inputs: 16
• Test Pulse Outputs: 4
(...)
• Supply Voltage: 24 VDC

Part Number: 301130

Pilz PSS 3056-1 Compact Safety System
Configuration:
• Inputs: 40
• Single-Pole Outputs: 16
• Dual-Pole Outputs: 4
(...)
• Supply Voltage: 24 VDC

Pilz PSS 3056 Series Datasheet (pdf)
Pilz PSS 3056 Series Manual (pdf)

Pilz PSS SB 3056 Compact Safety System
This unit is equipped with SafetyBUS p® Connection.

Configuration:
• Inputs: 32
(...)
• Single-Pole Outputs: 16
• Dual-Pole Outputs: 8
• Supply Voltage: 24 VDC

Pilz PSS SB 3056 Datasheet (pdf)

Pilz PSS SB DI8OZ4 Decentralized Digital I/O Circuit
This Pilz PSS SB DI8OZ4 Decentralized Digital I/O Circuit is used and in excellent condition. This may or may not have all screw terminal blocks installed.

Configuration:
(...)
• Digital Inputs: 8
• Supply Voltage: 24 VDC
• Positive-Switching Digital Outputs: 4
• Negative-Switching Digital Outputs: 4

Part Number: 301120

Pilz PSS1 DI2O T Digital Input/Output Module
The Pilz PSS1 DI2O T has digital input and output circuits / test pulses with integral software algorithms and redundant design for safety-related functions.

(...)
Configuration:
• Inputs: 16 digital
• Outputs: 16 digital (2 Amp) or pulsed

Model Number: PSS1 DI2O T EIN-AUSGABE 16E+16A

View Photo of the opened front panel.

Pilz PSS1 DI2O T Datasheet (pdf)
Pilz PSS1 DI2O T Operating Manual (pdf)

Pilz PSS1 SB CPU Central Processing Unit with SafetyBUS Connection
The Pilz PSS 1 SB CPU has Central processing unit with integral test algorithms and redundant design, for use as part of a modular safety-related system with connection to SafetyBUS.
(...)

Model Number: PSS 1 SB CPU ZENTRALEINHEIT

View Photo of the opened front panel.

Pilz PSS 1 SB CPU Datasheet (pdf)
Pilz PSS 1 SB CPU Operating Manual (pdf)

Pilz PSS1 DI2O T Digital Input/Output Module
The Pilz PSS1 DI2O T has digital input and output circuits / test pulses with integral software algorithms and redundant design for safety-related functions.

(...)
Configuration:
• Inputs: 16 digital
• Outputs: 16 digital (2 Amp) or pulsed

Model Number: PSS1 DI2O T EIN-AUSGABE 16E+16A

View Photo of the opened front panel.

Pilz PSS1 DI2O T Datasheet (pdf)
Pilz PSS1 DI2O T Operating Manual (pdf)

Pilz PSS1 BMP 5/2 Module Chassis
The PSS1 BMP 5/2 is a module rack designed for the mechanical installation of PSS 3100 modules and for the internal electrical wiring of the safety-related system. The module rack has a redundant(...) bus for installing failsafe modules such as the PSS1 DI2 or PSS1 DO. Slots 0 and 1 also have a single-channel bus for installing standard modules such as the PSS1 IBS-S PCP or PSS1 DP-S communications modules or, for example, the P9 DI or P9 DO.

This does NOT include a PSS1 PS 24 power supply. They are sold separately.

Chassis Part Number: 302006

Pilz PSS1 302156 CN Adapter Module
The Pilz PSS1 ControlNet-Adapter is a standard communications card for connecting to ControlNet.
(...)

Pilz PSS1 CN Adapter Datasheet (pdf)
Pilz PSS1 CN Adapter Hardware Manual (pdf)
Pilz PSS1 CN Adapter Declaration of Conformity (pdf)

Pilz PX 30 PGS5 Display and Operator Terminal
This Pilz PX 30 PGS5 Display and Operator Terminal is new from surplus stock.

Part Number: 307671
Pilz PSS SB DI808 Digital Input / Output Module
This Pilz PSS SB DI808 Digital Input / Output Module is new from surplus stock.

Part Number: 301140
Pilz PSS SB DI808 Digital Input / Output Module
This Pilz PSS SB DI808 Digital Input/Output Module is used and in excellent condition.

Part Number: 301140
Pilz PSS1 PS 24 Power Supply Module
The battery is used. The Pilz PSS1 PS 24 Power Supply Module has integral protection and monitoring circuits, for use as part of a modular safety-related system.

(...)
Configuration:
• Supply Voltage: 24VDC

Model Number: PSS1 PS 24 Netzteil Fail-Safe+Standard

View Photo of the opened front panel.

Pilz PSS1 PS 24 Power Supply Module Datasheet (pdf)
Pilz PSS1 PS 24 Power Supply Module Operating Manual (pdf)

Pilz PSS1 DIO Z Digital Input/Output Module
The Pilz PSS1 DIO Z has dual-pole switching input and output circuits with integral software algorithms and redundant design for safety-related functions.

(...)
Configuration:
• Digital Inputs: 16
• Digital Outputs 8 (Dual-Pole, 2 Amp)

View Photo of the opened front panel.

Pilz PSS DIO Z Datasheet (pdf)
Pilz PSS DIO Z Operating Manual (pdf)

Pilz PNOZ XV2 2S 2SZ Emergency Stop Relay
This Pilz PNOZ XV2 Emergency Stop Relay is used and in excellent condition.

Configuration:
• t: 3 s
(...)
• Ub: 24 VDC

Part Number: 774 502


Pilz GP270-LG21-24VP Mini-Touch 270 Monochrome Touchscreen Operator Panel
This is the monochrome version. It ships in the manufacturer's box with mounting hardware and a hard copy of the handling guide.

Part Numbers: GP270-LG21-24VP, 0680028-01
Pilz PSS 3056 Compact Safety System
Configuration:
• Inputs: 32
• Single-Pole Outputs: 16
• Dual-Pole Outputs: 8
(...)
• Supply Voltage: 24 VDC

Pilz PSS 3056 Series Datasheet (pdf)
Pilz PSS 3056 Series Manual (pdf)

Pilz PSS CPU Central Processing Unit
The PSS CPU is to be used with the PSS 3000 safety system. The PSS CPU controls the integral on-board and, where necessary, decentralized periphery modules. It processes and stores the user program(...) and variable data.

Pilz PSS CPU Operating Manual (pdf)

Part Number: 301060

Pilz PSS SB DI16 Digital I/O Module
This Pilz PSS SB DI16 Digital I/O Module is new from surplus stock. This unit ships in the original manufacturer's box.

Pilz H-DOWNLOADKABEL PITOUCH Download Cable
This item is also known as the Proface / Digital Electronics GPW-CB02 Download Cable.

Part Number: 374165
Pilz PSS SB DI16 Digital I/O Module
This Pilz PSS SB DI16 Digital I/O Module is used and in good condition. The housing on this unit is chipped; however, this does not affect its ability to function properly.
(...)

Configuration:
• Digital Inputs: 16
• Test Pulse Outputs: 4
• Supply Voltage: 24 VDC

View Representative Photo of chipped housing.

Part Number: 301130

Pilz PKB 110A 390-460VAC Compact Brake
This Pilz PKB 110A 390-460VAC Compact Brake is new from surplus stock.

Part Number: 496772
Pilz PXT 90 PGS5 Operator Terminal
This Pilz PXT 90 PGS5 Operator Terminal is new from surplus stock.

Pilz PSS1 PS 24 Power Supply Module
The Pilz PSS1 PS 24 Power Supply Module has integral protection and monitoring circuits, for use as part of a modular safety-related system. Battery has unknown remaining life.

(...)
Configuration:
• Supply Voltage: 24VDC

Model Number: PSS1 PS 24 Netzteil Fail-Safe+

View Photo of the opened front panel.

Pilz PSS1 PS 24 Power Supply Module Datasheet (pdf)
Pilz PSS1 PS 24 Power Supply Module Operating Manual (pdf)

Pilz PXT 5 SER Display and Operating System
This Pilz PXT 5 SER Display and Operating System is new from surplus stock.

Part Number: 308695
Pilz PI-Panel Keyboard Control Monitor
DC Input Voltage: 24 VDC

Part Number: 243008
Pilz PSS SB 3006 CN-A Compact Safety System
The PSS SB 3006 CN-A is a compact safety system with SafetyBUS p and Interbus interface, suitable for safety-related functions because of its multi-channel diverse structure.

(...)
Configuration:
• 6 Digital Inputs
• Data Memory (Failsafe Section/Standard Section): 16 KB / 170 KB
• Program Memory (Failsafe Section/Standard Section): 256 KB / 512 KB

Pilz PSS SB 3006 CN-A Datasheet (pdf)

Pilz PSS1 CPU2 Central Processing Unit
The PSS1 CPU2 controls the integral on-board and, where necessary, decentralized periphery modules. It processes and stores the user program and variable data.
(...)

Part Number: PSS1 CPU2 ZENTRALEINHEIT (PSS1 CPU2 Central Unit)

View Photo of the opened front panel.

Pilz PSS1 CPU2 Operating Manual (pdf)

Pilz PKB-M/30A/470-550V AC Mini Compact Brake
This Pilz PKB-M/30A/470-550V AC Mini Compact Brake is used and in excellent condition.

Part Number: 796743
Pilz GP270-LG21-24VP Mini-Touch 270 Monochrome Touchscreen Operator Panel
This is the monochrome version.

Part Numbers: GP270-LG21-24VP, 0680028-01
Pilz PSS1 DI2O Z Digital Input/Output Module
The hinge on the front panel is broken. The Pilz PSS1 DI2O Z has dual-pole switching input and output circuits with integral software algorithms and redundant design for safety-related functions.(...)

Configuration:
• Inputs: 16 digital
• Outputs: 16 digital

Part Number: PSS1 DI2O Z EIN-AUSGABE 16E+8A

View Photo of the opened front panel.

View Photo of the broken hinge on the front panel.

Pilz PSS1 DI2O Z Datasheet (pdf)
Pilz PSS1 DI2O Z Operating Manual (pdf)

Pilz PSS 3032 Programmable Safety System Fail-Safe Module
The Pilz PSS 3032 is a compact safety system within a single housing. Connections are made via screw terminals. The system can be connected to other controller types via I/Os or via a serial(...) interface. Safety systems in the PSS-range are divided into a failsafe section and a standard section. Safety-related functions can only be processed through the failsafe section. The failsafe and standard sections communicate without feedback, i.e. potential program errors in the standard section will not affect the safety section. The failsafe section of the CPU operates through three diverse channels, ensuring a high level of safety. All inputs and outputs are processed separately by each channel. Each channel compares the result with the two adjacent channels. Input and output signals are only valid if all three channels reach the same result (3oo3). The PSS 3032 has an integral Flash-EPROM program memory with 64 KByte for both the standard and failsafe section. The unit has two serial interfaces: an RS 232 interface that is available to the user, and an RS 485 that is used for programming.

Pilz PSS 3032 Datasheet (pdf)
Pilz PSS 3032 Installation Manual (pdf)

Pilz PX 150-40-AR DISPLAY Display and Operator Terminal
This Pilz PX 150-40-AR DISPLAY Display and Operator Terminal is used and in excellent condition.

Part Number: 308636
Pilz PI-Panel S Keyboard Control Monitor
This unit ships in the manufacturer's packaging with standard documentation and accessories.

AC Input Voltage: 115/230 VAC

Part Number: 243932
Pilz PSS1 CPU Central Processing Unit
The PSS1 CPU controls the integral on-board and, where necessary, decentralized periphery modules. It processes and stores the user program and variable data.
(...)

Model Number: PSS1 CPU ZENTRALEINHEIT (PSS1 CPU Central Unit)

View Photo of the opened front panel.

View Photo of the included operating manual.

Pilz PSS1 CPU Operating Manual (pdf)

Pilz PNOZ m1p Configurable Control System Base Unit
This module does not include a CHIP-Card.

Part Number: 773100
Pilz PSS1 DIO Z Digital Input/Output Module
The Pilz PSS1 DIO Z has dual-pole switching input and output circuits with integral software algorithms and redundant design for safety-related functions.

(...)
Configuration:
• Digital Inputs: 16
• Digital Outputs 8 (Dual-Pole, 2 Amp)

Part Number: 302108, SP2000-3703

Pilz PSS DIO Z Datasheet (pdf)
Pilz PSS DIO Z Operating Manual (pdf)

Pilz PSS1 BMP 5/2 Module Chassis
The PSS1 BMP 5/2 is a module rack designed for the mechanical installation of PSS 3100 modules and for the internal electrical wiring of the safety-related system. The module rack has a redundant(...) bus for installing failsafe modules such as the PSS1 DI2 or PSS1 DO. Slots 0 and 1 also have a single-channel bus for installing standard modules such as the PSS1 IBS-S PCP or PSS1 DP-S communications modules or, for example, the P9 DI or P9 DO.

Chassis Part Number: 302006
Installed Power Module: PSS1 PS 24
Power Module Part Number: 302051

View Photo of the opened front panel of the PSS1 PS 24.

Pilz PSS1 PS 24 Datasheet (pdf)
Pilz PSS1 PS 24 Operating Manual (pdf)

Pilz PI-Panel S Keyboard Control Monitor
DC Input Voltage: 24 VDC

Part Number: 243932
Pilz PNOZ m1p Configurable Control System Base Unit
Configuration:
(...)
• 8 KB - 32 KB* Chip Card

Part Number: 773100, -A100

*If a specific memory size is required, please contact Artisan Technology Group Sales for pricing and availability. Otherwise, memory sizes will be within the specified range.

Showing 1-50 of 108 Results
Contact Us
Fax:

(240) 376-1381