Items/Page
Showing 1-100 of 132 Results
Schneider Electric / Invensys / Foxboro FPS400-24 I/A Series DIN Rail Mounted Power Supply
Configuration:
• Input Power: 120/240 VAC or 125VDC Input

Part Number: P0922YU
Schneider Electric / Invensys / Foxboro 75RTA-PDEFB Single Loop Microprocessor Based Ratemeter/Totalizer
This Schneider Electric / Invensys / Foxboro 75RTA-PDEFB Single Loop Microprocessor Based Ratemeter/Totalizer is used and in excellent condition.

Configuration:
• Enclosure: Panel Mounting
• Language: English
• Nominal Supply Voltage and Frequency: 120/240 VAC, 50/60 Hz; 24 VDC
• Input Signal: Analog Primary Flow Input Signal, 4 to 20 mA

Part Number: 57630-447

Schneider Electric / Invensys / Foxboro N-2AX+ALM-AR Dual Absolute Alarm Relay Output Card
This Schneider Electric / Invensys / Foxboro N-2AX+ALM-AR Dual Absolute Alarm Relay Output Card is new from surplus stock.
Schneider Electric / Invensys / Foxboro IGP10-T22D1F-L1 Intelligent Gauge Pressure Transmitter
IGP10-T22D1F-L1 Configuration:
• Electronics Versions and Output Signal: Intelligent; Digital HART and 4 to 20 mA
• Process Connection Material: 316L ss

• Sensor: 316L ss
• Fill Fluid: Silicone
• Span Limits: MPa 0.07 and 2.1, psi 10 and 300, bar 0.7 and 21
• Conduit Connection: 1/2 NPT, Both Sides
• FM Approved
• Digital Indicator, Pushbuttons, and Window Cover

Schneider Electric / Invensys / Foxboro P0903CV Annunciator Keyboard
Configuration:
• 48 LED/Switch Pairs (12 x 4)
• Horn Silence Switch

• Lamp-Test Switch

Schneider Electric / Invensys / Foxboro P0903CV Manual (pdf)

Schneider Electric / Invensys / Foxboro FBM201 Analog Input Interface Module
Configuration:
• Input Range: 0 to 20 mA dc

• Input Channel Impedance: 61.5 Ω Nominal

Part Number: P0914SQ

Schneider Electric / Invensys / Foxboro FBM201/b/c/d Datasheet (pdf)

Schneider Electric / Invensys / Foxboro IDP10-T22C21F-M1L1 I/A Series Electronic d/p Cell Transmitter for Differential Pressure Measurement
IDP10-T22C21F-M1L1 Configuration:
• Electronics Versions and Output Signal: Intelligent; Digital, HART and 4 to 20 mA (Version -T)
• Structure Code: Transmitter with Traditional Structure - Cover 316 ss, Sensor 316L ss, Fill Fluid Silicone
• Span Limits (Differential Pressure Units): kPa 7 and 210, inH2O 28 and 840, mbar 70 and 2100
• Process Connector Type (Material Same As Process Cover Material): 1/2 NPT, Not with Structure Codes 78 or 79, or Pressure Seals
• Conduit Connection and Housing Material: 1/2 NPT Conduit Connection, Aluminum Housing
• Electrical Safety: FM Approved, Division 1 Intrinsically Safe, Explosion Proof, Dust-Ignition Proof; and Non-Incendive, Division 2, Classes I, II, and III. Zone approved intrinsically safe AEx ia IIC.
• Mounting Bracket Set: Standard Style Painted Steel Bracket with Plated Steel Bolts
• Digital Indicator with Pushbuttons: Digital Indicator, Pushbuttons, and Window Cover

Part Number: NC40F0325B

Schneider Electric / Invensys / Foxboro P0960KA Carrierband LAN Interface
Part Numbers: P0960KA, P0960KA-0C, P0960KA-0H, P0960KA-0G, P0960KA-0F
Schneider Electric / Invensys / Foxboro IDP10-A20B21F I/A Electronic Pressure Transmitter
This Schneider Electric / Invensys / Foxboro IDP10-A20B21F I/A Electronic Pressure Transmitter is used and in excellent condition.

IDP10-A20B21F Configuration:
• Electronics Versions and Output Signal: A; Analog, 4 to 20 mA dc
• Structure Code: Transmitter with Traditional Structure-Cover 316 ss, Sensor Co-Ni-Cr, Fill Fluid Silicone
• Span Limits (Differential Pressure Units): kPa 0.87 and 50, inH2 3.5 and 200, Omb 8.7 and 500
• Process Connector Type (Material Same As Process Cover Material): 1/2 NPT, Not with Structure Codes 78 or 79, or Pressure Seals
• Conduit Connection and Housing Material: 1/2 NPT Conduit Connection, Aluminum Housing
• Electrical Safety: FM Approved, Division 1 Explosion Proof, Dust-Ignition Proof; and Division 2 Non-incendive

Schneider Electric / Invensys / Foxboro IDP10-T22C01F I/A Series Electronic d/p Cell Transmitter for Differential Pressure Measurement
IDP10-T22C01F Configuration:
• Electronics Versions and Output Signal: Intelligent; Digital, HART and 4 to 20 mA (Version -T)

• Structure Code: Transmitter with Traditional Structure - Cover 316 ss, Sensor 316L ss, Fill Fluid Silicone
• Span Limits (Differential Pressure Units): kPa 7 and 210, inH2O 28 and 840, mbar 70 and 2100
• Process Connector Type (Material Same As Process Cover Material): No connectors; both covers tapped for 1/4 NPT (316 ss only, no side vents)
• Conduit Connection and Housing Material: 1/2 NPT Conduit Connection, Aluminum Housing
• Electrical Safety: FM Approved, Division 1 Intrinsically Safe, Explosion Proof, Dust-Ignition Proof; and Non-Incendive, Division 2, Classes I, II, and III. Zone approved intrinsically safe AEx ia IIC.

Part Number: NC52K0226B

Schneider Electric / Invensys / Foxboro IMT96-SEADB10L-B I/A Series Intelligent Magnetic Flow Transmitter
This Schneider Electric / Invensys / Foxboro IMT96-SEADB10L-B MagEXPERT Flow Transmitter is new from surplus stock.

IMT96-SEADB10L-B Configuration:

• Transmitter Mounting: Surface, Wall, or Panel Mounting
• Language: English
• Nominal Supply Voltage and Frequency: 120 VAC, 47 to 63 Hz
• Communication Protocol: Digital FoxCom and/or 4 to 20 mA, Configurable
• Integral LCD Indicator/Keypad: LCD Indicator with Wide Angle Display and Keypad
• Transmission Signal Output: Internally Powered, 4 to 20 mA and Superimposed Digital Signal; 600 Baud FoxCom
• Pulse Output Signal: OFF
• Electrical Safety Classification: CSA, Class I, Division 2; Class II, Division 2; Class III, Division 2
• Optional Selections: LCD Indicator/Keypad Protective Cover

Schneider Electric / Invensys / Foxboro FBM 4/39/44 Terminal Plug
This unit has wiring still installed by previous end user.

Part Number: P0500RY

Schneider Electric / Invensys / Foxboro FBM237 Channel Isolated Output Interface Module
Configuration:
• 8 Outputs
• Redundant Ready
• 0-20 mA

Part Number: P0914XS
Schneider Electric / Invensys / Foxboro FBM 4/39/44 Terminal Plug
This unit is missing its strain relief bar; however, this will not prevent it from functioning properly.

This unit has wiring still installed by previous end user.


Part Number: P0500RY

View Photo of missing strain relief bar.

Schneider Electric / Invensys / Foxboro FBM04 0-20mA I/O Interface Module
This unit is missing the front module, cable, and connector module.

Part Number: P0400YE, P0400YE-0P, P0400YE-0S, P0400YE-0R, P0400YE-0K


Schneider Electric / Invensys / Foxboro FBM04 Manual (pdf)

Schneider Electric / Invensys / Foxboro IDP10-F22C11F-M1L1W Differential Pressure Transmitter
This Schneider Electric / Invensys / Foxboro IDP10-F22C11F-M1L1W Differential Pressure Transmitter is used and in excellent condition.

Configuration:
• Transmitter: Foundation Fieldbus Protocol
• Structure: 316ss Cover, 316Lss Sensor, Silicone Fill Fluid

Schneider Electric / Invensys / Foxboro N-2AP Carrier Module
This Schneider Electric / Invensys / Foxboro N-2AP Carrier Module is new from surplus stock.
Schneider Electric / Invensys / Foxboro N-2AP Carrier Module
This Schneider Electric / Invensys / Foxboro N-2AP Carrier Module is used and in excellent condition.
Schneider Electric / Invensys / Foxboro CM902WM I/A Series Industrial Power Module 3A
This unit is also known as the Astec Model AA16565.

Configuration:
• Selectable Input: 100 / 120 / 220 / 240 VAC

• Output: 27.5 VDC at 2.4A Continuous

Part Number: CM902WM-A

Schneider Electric / Invensys / Foxboro CM902WL I/A Series Industrial Power Module 2
This unit is also known as the Astec Model AA16560.

Configuration:
• Selectable Input: 100 / 120 / 220 / 240 VAC

• Output: 39 VDC at 1.7 A Continuous

Part Number: CM902WL-B

Schneider Electric / Invensys / Foxboro E83W-02SSSP Vortex Flowmeter-Wafer Body
This Schneider Electric / Invensys / Foxboro E83W-02SSSP Vortex Flowmeter-Wafer Body with 4 to 20 mA Analog and Pulse Outputs is used and in excellent condition.

E83W-02SSSP Configuration:
• Electronics Type: 4 to 20 mA Analog and Pulse Electronics
• Nominal Line Size: 2 in (DN 50)
• Body Material: ASTM A351-CF8M (316 ss) Cast Body and Shedder
• Isolation Valve: None
• Sensor Fill, Temperature Range, and Material: Silicone Fill, 0 to 400°F (–20 to +200°C) Stainless Steel Type CF3M

Schneider Electric / Invensys / Foxboro P0900NT Carrierband LAN Interface (CBI) Module
This unit has a chipped housing; however, this will not prevent it from functioning properly.

Part Numbers: P0900NT, P0900NT-0K, P0900NT-0M


View Representative Photo of damage to the housing unit.

Schneider Electric / Invensys / Foxboro CM902WX I/A Series Industrial Power Module 6A AC Power Supply
Configuration:
• Selectable Input: 100 / 120 / 220 / 240 VAC
• Output: 24 VDC

Part Number: CM902WX-0F, CM902WX-A
Schneider Electric / Invensys / Foxboro P0170NH Power Cord (2 Ft.)
This Schneider Electric / Invensys / Foxboro P0170NH Power Cord (2 Ft.) is new from surplus stock.

Part Number: P0170NH, P0170NH-C, P0170NH-D
Schneider Electric / Invensys / Foxboro Wonderware 17
This unit has a few scratches on the screen; however, this does not affect its ability to function properly. This is for the detachable display panel only, the computer module is sold separately.

Configuration:
• Screen: Diagonal 17-inch SXGA
• Resolution: 1280 x 1024

View Representative Photo of scratches on screen.

Schneider Electric / Invensys / Foxboro FBM 4/39/44 Terminal Plug
This unit is missing its number badge, bottom cover, and strain relief bar; however, this will not prevent it from functioning properly.

This unit has wiring still installed by previous end user.

Part Number: P0500RY

View Photo of the Lower Section of the Unit.

Schneider Electric / Invensys / Foxboro FBM 3A Terminal Plug
This unit is missing its strain relief bar; however, this will not prevent it from functioning properly.

This unit has wiring still installed by previous end user.


Part Number: P0500RU

View Photo of missing strain relief bar.

Schneider Electric / Invensys / Foxboro 130FD-N-C-L Pneumatic CONSOTROL Control Station
This Schneider Electric / Invensys / Foxboro 130FD-N-C-L Pneumatic CONSOTROL Control Station is used and in excellent condition.

Configuration:
• Supply: 20-22 PSIG
• Input: 3-15 PSIG
• Output: 3-15 PSIG

Schneider Electric / Invensys / Foxboro L0113EQ UV Erasable PROM Module
Configuration:
• Military Temperature Range: -55°C to +100°C
Schneider Electric / Invensys / Foxboro P56010111130 I/A Series Disk Drive
This unit is also known as Sun Microsystems Model No. 447, Part No. 603-2065-01.
Schneider Electric / Invensys / Foxboro AG330EA PW-C Release Kit, V3.3, 5 1/4 in. (Set of 15 Disks)
Includes:
• K0173FN-F, SYS MGR Display Handler, 1 Disk
• K0200AU-D, MDEP PW-C Support Update, 3 Disks

• K0200AU-D, Personal Workstation-C Support Update, 3 Disks
• K0200AU-D, XFER (Transfer Diskette) Support Update, 1 Disk
• K0200CR-A, Release Level, 5 Disks
• K0200CS-A, PW Release Update, 2 Disks

Schneider Electric / Invensys / Foxboro K0173PB Personal Workstation-C, V3.2, 5 1/4 in. (Set of 25 Disks)
Includes:
• K0173PB-C, MDEP Personal Workstation-C, 3 Disks
• K0173PB-C, SYS Personal Workstation-C, 2 Disks

• K0173PB-C, USR Personal Workstation-C, 19 Disks
• K0173PB-C, XFER (Transfer Diskette) Personal Workstation-C, 1 Disk

Schneider Electric / Invensys / Foxboro P0903NU 1X8 Cell Sub Assembly
This unit has the Converter Interface Module installed.

Converter Interface Module Part Number: P0912CA
Showing 1-100 of 132 Results
Contact Us
Fax:

(240) 376-1381