Items/Page
71 / 71 Results
This LeCroy AP-1M High Impedance Adapter is new from surplus stock. This unit has a 1 MΩ impedance interface. It is designed for use with the WaveMaster family of products (DSO, DDA, SDA).

LeCroy AP-1M Datasheet (pdf)

Product Family: AP-1M, AP 1M, AP1M

This LeCroy PP066 7.5 GHz Passive Probe is new from surplus stock. This unit ships in the original box and comes with a manual and accessories.

LeCroy PP066 Datasheet (pdf)

LeCroy PP066 Manual (pdf)

This LeCroy AP020 High Frequency FET Probe is used and in excellent condition.

Configuration:

• Bandwidth: DC to 1000 MHz
• Input Impedence: 1 MOhm
• Input Capacitance: 1.8 pF
• Attenuation: 10:1
• Dynamic Range: 10 V
• DC Offset Range: +/- 20 V
• ProBus Compatible

View Photo of probe connections.

This LeCroy PXD222 PXI Digitizer is used and in excellent condition.
This LeCroy DDA-120 4-Channel, 8 GS/s, 16-bit, 1GHz Bandwidth Oscilloscope is used and in excellent condition.

This unit reports the following options:

• Soft Version: DDA-120 9.3.0
• Scope ID: 3DE478-A0
• Installed Option Key: 9D8E-60C9-AEF7-18B1
• Options Enabled by this Key: MC01
Opt WP01: Advanced Waveform Math Package Installed
Opt WP02: Spectrum Analysis Package Installed
Opt WP03: Parameter Analysis Package Installed
Opt DDM: Disk Drive Measurements Installed
Opt CKIO: Clock In/Out Installed
Opt PRML: Supplementary Disk Drive Measurements Installed
Opt DDFA: Disk Drive Failure Analysis Installed
Opt MC01: Memory Card Reader and 512k SRAM Card Installed
Opt CPUP: PowerPC High Speed Processor Installed
Opt VGAC: VGA Output Port Installed
Opt GPIB: IEEE-488 I/O Control Bus Installed
Opt R232: Serial I/O Installed
Opt CLBZ: Piezo Buzzer Alarm Installed
Opt FD01: Floppy Drive Installed
Opt GP01: Internal Graphics Printer Installed
Opt CENT: Parallel Centronics Printer Port Installed
Opt CKTR: Clock Trigger Installed
Opt I2C: ProBus Installed
• Main Processor Ram: 64 MB
• Acquisition Memory Size: 4M data points per channel
• Trigger Options: AUTO, NORMAL, SINGLE, STOP
• PC Card (PCMCIA I/II/III Ports): for memory cards
• Floppy Disk Drive
• Grid Styles: Single, Dual, Quad, Octal, and Full Screen
• Plotter: Internal, high resolution graphics printer (standard)
• External Monitor: Rear panel 15-pin socket for VGA compatible monitor
• Max Input Voltages: 50 Ohms - 5VDC; 1Mohm - 400V max

This LeCroy PP092 2 Gs/s Adapter is used and in excellent condition. This unit is for the 9354 Series Oscilloscope.

View the back of the unit here.

This LeCroy Model 6103 Amplifier CAMAC Module is used and in excellent condition.
This LeCroy OE325 O/E (Optical to Electrical) Converter is used and in excellent condition. This unit comes with a manual, (1) 1-meter long FC/PC-FC/PC fiber cable, (1) 2-meter long FC/PC-FC/PC fiber cable, (1) FC-to-SC adapter and (1) FC-ST adapter.

Configuration:
• Optical Interface: FC/PC
• Bandwidth: DC to 1.5 GHz
• Wavelength Range: 950 to 1600 nm
• ProBus Compatible

The OE325 is a -35 dBm (300 nW) to 0 dBm (1 mW) optical probe, with a single-mode fiber light input. It is specifically designed for the measurement of telecommunication signals based on modulated 1310 nm-wavelength light. It is a straight-forward plug-in probe that is compatible with all LeCroy instruments equipped with the ProBus intelligent probe interface. DC, AC, and impulse light intensities can be measured, with the oscilloscope automatically handling the conversion of units to Watts on the display, and when cursor or parameter measurements are being made.

LeCroy OE325 User Guide (pdf)

This Teledyne / LeCroy LC534AL Color Digital Oscilloscope is used and in excellent condition. This unit includes a front cover.

Configuration:
• Maximum Sample Rate and Acquisition Memories, Any Channel (Peak Detect Off): 2 M
• System RAM: 16 Mbytes
• Segments: 2 to 2,000

View Photo of front cover.

This LeCroy PP093 2 Gs/s Adapter is used and in excellent condition. This unit is for the 9374 Series Oscilloscope.

View the back of the unit here.

This Teledyne / LeCroy LT344L Digital Oscilloscope is used and in excellent condition.

Configuration:
• Channels: 4

• Bandwidth: 500 MHz
• Sample Rate: 500 MS/s
• Acquisition Memory: 1 Mpts/Ch
• Analog Persistence: Yes
• Processor: 96 MHz PowerPC
• Memory: 32 MB
• Software Version: 9.3.0

Soft Options:
• JTA
• WAVA

Hard Options:
• CPUP
• VGAC
• GPIB
• R232
• CLBZ
• FD01
• CENT
• I2C
• GP02

This LeCroy DDA-120 4-Channel, 8 GS/s, 16-bit, 1GHz Bandwidth Oscilloscope w/ Jitter is used and in excellent condition. This unit also has Disk Drive Analyzer software installed.

Jitter Option Installed

This unit reports the following options:
• Soft Version: DDA-120 9.3.0
• Scope ID: E37B76-ED
• Installed Option Key: E47E-E3C7-FDE7-F567
• Options enabled by this key: MC01,JTA
Opt WP01: Advanced Waveform Math Package Installed
Opt WP02: Spectrum Analysis Package Installed
Opt WP03: Parameter Analysis Package Installed
Opt DDM: Disk Drive Measurements Installed
Opt CKIO: Clock In/Out Installed
Opt PRML: Supplementary Disk Drive Measurements Installed
Opt DDFA: Disk Drive Failure Analysis Installed
Opt MC01: Memory Card Reader and 512k SRAM Card Installed
Opt JTA: Jitter and Timing Analysis Installed
Opt CPUP: PowerPC High Speed Processor Installed
Opt VGAC: VGA Output Port Installed
Opt GPIB: IEEE-488 I/O Control Bus Installed
Opt R232: Serial I/O Installed
Opt CLBZ: Piezo Buzzer Alarm Installed
Opt FD01: Floppy Drive Installed
Opt GP01: Internal Graphics Printer Installed
Opt CENT: Parallel Centronics Printer Port Installed
Opt CKTR: Clock Trigger Installed
Opt I2C: ProBus Installed
• Main Processor Ram: 64 MB
• Acquisition Memory Size: 4M data points per channel
• Trigger Options: AUTO, NORMAL, SINGLE, STOP
• PC Card (PCMCIA I/II/III Ports): for memory cards
• Floppy Disk Drive
• Grid Styles: Single, Dual, Quad, Octal, and Full Screen
• Plotter: Internal, high resolution graphics printer (standard)
• External Monitor: Rear panel 15-pin socket for VGA compatible monitor
• Max Input Voltages: 50 Ohms - 5VDC; 1Mohm - 400V max

This LeCroy DDA-120 4-Channel, 8 GS/s, 16-bit, 1GHz Bandwidth Oscilloscope w/ Jitter is used and in excellent condition. This unit also has Disk Drive Analyzer software installed.

Jitter Option Installed

This unit reports the following options:
• Soft Version: DDA-120 9.3.0
• Scope ID: 98158-FC
• Installed Option Key: 4F59-9748-866C-70CA
• Options enabled by this key: MC01,JTA
Opt WP01: Advanced Waveform Math Package Installed
Opt WP02: Spectrum Analysis Package Installed
Opt WP03: Parameter Analysis Package Installed
Opt DDM: Disk Drive Measurements Installed
Opt CKIO: Clock In/Out Installed
Opt PRML: Supplementary Disk Drive Measurements Installed
Opt DDFA: Disk Drive Failure Analysis Installed
Opt MC01: Memory Card Reader and 512k SRAM Card Installed
Opt JTA: Jitter and Timing Analysis Installed
Opt CPUP: PowerPC High Speed Processor Installed
Opt VGAC: VGA Output Port Installed
Opt GPIB: IEEE-488 I/O Control Bus Installed
Opt R232: Serial I/O Installed
Opt CLBZ: Piezo Buzzer Alarm Installed
Opt FD01: Floppy Drive Installed
Opt GP01: Internal Graphics Printer Installed
Opt CENT: Parallel Centronics Printer Port Installed
Opt CKTR: Clock Trigger Installed
Opt I2C: ProBus Installed
• Main Processor Ram: 64 MB
• Acquisition Memory Size: 4M data points per channel
• Trigger Options: AUTO, NORMAL, SINGLE, STOP
• PC Card (PCMCIA I/II/III Ports): for memory cards
• Floppy Disk Drive
• Grid Styles: Single, Dual, Quad, Octal, and Full Screen
• Plotter: Internal, high resolution graphics printer (standard)…Currently not working on this unit
• External Monitor: Rear panel 15-pin socket for VGA compatible monitor
• Max Input Voltages: 50 Ohms - 5VDC; 1Mohm - 400V max

This LeCroy DDA-120 4-Channel, 8 GS/s, 16-bit, 1GHz Bandwidth Oscilloscope w/ Jitter is used and in excellent condition. This unit also has Disk Drive Analyzer software installed.

Jitter Option Installed

This unit reports the following options:
• Soft Version: DDA-120 9.3.0
• Scope ID: 736507-E6
• Installed Option Key 0: 0813-9073-9A2F-F09D
• Options enabled by key 0: WP01, WP02, WP03
• Installed Option Key 1: 51AB-FB0A-022F-F203
• Options enabled by key 1: MC01, JTA
Opt WP01: Advanced Waveform Math Package Installed
Opt WP02: Spectrum Analysis Package Installed
Opt WP03: Parameter Analysis Package Installed
Opt DDM: Disk Drive Measurements Installed
Opt CKIO: Clock In/Out Installed
Opt PRML: Supplementary Disk Drive Measurements Installed
Opt DDFA: Disk Drive Failure Analysis Installed
Opt MC01: Memory Card Reader and 512k SRAM Card Installed
Opt JTA: Jitter and Timing Analysis Installed
Opt CPUP: PowerPC High Speed Processor Installed
Opt VGAC: VGA Output Port Installed
Opt GPIB: IEEE-488 I/O Control Bus Installed
Opt R232: Serial I/O Installed
Opt CLBZ: Piezo Buzzer Alarm Installed
Opt FD01: Floppy Drive Installed
Opt GP01: Internal Graphics Printer Installed
Opt CENT: Parallel Centronics Printer Port Installed
Opt CKTR: Clock Trigger Installed
Opt I2C: ProBus Installed
• Main Processor Ram: 64 MB
• Acquisition Memory Size: 4M data points per channel
• Trigger Options: AUTO, NORMAL, SINGLE, STOP
• PC Card (PCMCIA I/II/III Ports): for memory cards
• Floppy Disk Drive
• Grid Styles: Single, Dual, Quad, Octal, and Full Screen
• Plotter: Internal, high resolution graphics printer (standard)
• External Monitor: Rear panel 15-pin socket for VGA compatible monitor
• Max Input Voltages: 50 Ohms - 5VDC; 1Mohm - 400V max

This Teledyne / LeCroy PXD1021 PXI Digitizer is used and in excellent condition.

Configuration:
• Bandwidth: 1 GHz
• Maximum Single Shot Sample Rate: 2 GS/s

• Channels: 1
• 3U PXI Slots: 2
• Acquisition Memory Option 2: 8M
• Sequential Mode Max. Segments: 81902
• Power Consumption: 35 W

This LeCroy AP215 NRZ Logic Probe is new from surplus stock. This unit ships in the original LeCroy box and comes with a Specifications sheet, a PK201 Cable and a PK202 Flying Lead Connector.

Configuration:
• RCK (max): 50 MHz
• NRZ (TTL Input): ≤ 12 bits
• Interface: ProBus

LeCroy AP215 Specifications (pdf)

This LeCroy Model 8800A CAMAC Memory Module is used and in excellent condition.
This LeCroy 4222 Quad, Wide Range, Gate and Delay Generator for CAMAC is used and in excellent condition.
This LeCroy 2301 qVt-CAMAC Module is used and in excellent condition.
This LeCroy MM8105 Memory CAMAC Module is used and in excellent condition.
This LeCroy CD8828B Control and Display CAMAC Module is used and in excellent condition.
This LeCroy Model CG8528B Clock CAMAC Module is used and in excellent condition.
This LeCroy 2264 CAMAC Waveform Digitizer is used and in excellent condition.
This LeCroy 8100 Dual Prog Amplifier is used and in excellent condition.

Configuration:
• Programmable Input Range: .1 V - 50 V full scale

• Good common mode rejection: 40 db at 100 KHz
• Excellent frequency response: DC to 1 MHz
• Convenient cut-off filter: 200 KHz

This LeCroy 8212A/8 CAMAC Fast Data Logger Module is used and in excellent condition.
Configuration:
• Channels/Mainframes: 32 Max.
• Channels/Pods: 4
• Voltage Output: 0 to -3.3kV

• Current Output/Channel: 2.5mA Max.


Configuration:
• Channels/Mainframes: 32 Max.
• Channels/Pods: 4
• Voltage Output: 0 to +3.3kV

• Current Output/Channel: 2.5mA Max.


Configuration:
• Channels/Mainframes: 16 Max.
• Channels/Pods: 2
• Voltage Output: 0 to -7 kV

• Current Output/Channel: 500 μ A Max.


Configuration:
• Channels/Mainframes: 16 Max.
• Channels/Pods: 2
• Voltage Output: 0 to +7 kV

• Current Output/Channel: 500 μA Max.


This LeCroy Model 8201 Waveform Analyzer CAMAC Module is used and in excellent condition.
This LeCroy MM8103A Memory CAMAC Module is used and in excellent condition.
This LeCroy 2256S Waveform Digitizer CAMAC Module is used and in excellent condition.

The Model 2256S features an input attenuation dial as well as several input and output connections.
This LeCroy 5211 O Link CAMAC Module is used and in excellent condition
This Teledyne / LeCroy OE555 Multi-Mode Optical-to-Electrical Converter is used and in excellent condition.

Configuration:

• Wavelength Range: 950-1630 nm
• Connector: ProLink BMA

Included Accessories:
• FC Multimode Cable
• FC to SC Adapter
• FC to ST Adapter
• Storage Case

This LeCroy 8501 CAMAC Programmable Three-Speed Clock Generator is used and in excellent condition.

This LeCroy 2800 CAMAC Memory Module is used and in excellent condition.
This LeCroy TR8828C Transient Recorder Module is used and in excellent condition.

Part Number: TR8828
This LeCroy 2132 HV-CAMAC Interface Module is used and in excellent condition.
This LeCroy MM8206/16 Memory CAMAC Module is used and in excellent condition.

This LeCroy MM8201/16 Memory Module is used and in excellent condition.
This LeCroy 2256A Waveform Digitizer CAMAC Module is used and in excellent condition.

The Model 2256A features a trigger scope signal input along with other signal inputs.
This LeCroy 8800/8 CAMAC Memory Module is used and in excellent condition.

This LeCroy 8212A CAMAC Fast Data Logger Module is used and in excellent condition.
This Lecroy 8801/12 CAMAC Dual Port Memory Module is used and in excellent condition.
This Lecroy 8601 Function Generator CAMAC Module is used and in excellent condition.
This LeCroy MM8206A Dual Port Memory CAMAC Module is used and in excellent condition.
The Model TR8818A features external connections on the side panel for Clock Out, Clock In and Stop functions.

Configuration:
• Front Panel RF Connectors: BNC
This LeCroy Model 8800/10 CAMAC Memory Module is used and in excellent condition.
This LeCroy 8800/12 CAMAC Memory Module is used and in excellent condition.
This is also known as the CATC UPAS System Blank Faceplate.
Configuration
• Max Input: 50 ohm; 5 Vrms, 1 MOhm: 400 Vmax
• Repetitive Sampling Rate: 10 GS/s Max
• Sentence: 2-400 Segments
This LeCroy 2264 Waveform Digitizer CAMAC Module is used and in good condition. This unit is missing a side panel, however it does not affect the functionality of the module.

View Photo of the missing plate on the side of this unit.

71 / 71 Results
Contact Us
Fax:

(240) 376-1381