50 / 8850 Results
Items/Page
National Instruments ER-16 Electromechanical SPDT Relay
Configuration:
• Number of Channels: 16
(...)
• Relay Type: SPDT (1form C) non Latching

Part Number: 183064B-02, 777081-01

Emerson / Asco EF8344G074 RedHat Piston/Poppet Solenoid Valve
Configuration:
• Solenoid: Single
• Pipe Size: 1/2 in.
• Orifice Size: 3/8 in.
(...)
• Cv Flow Factor, Press.: 1.4
• Operating Pressure Differential (PSI), Min.: 10
• Option: Explosionproof and Watertight

Part Number: EF8344G074
Rebuild Kit Number: 302711
Solenoid Cata. Number: EF8003G1

GE / Bently Nevada 330180-91-05 5/8 mm Proximitor Sensor
Probes and Extension Cables are sold separately.

Configuration:
(...)
• Total Length and Mounting Option: 9 Meters System Length, DIN Mount
• Agency Approval Option: Multiple Approvals

The GE / Bently 3300 XL 5/8mm Proximitor Sensor is compatible with all 5 and 8 mm 3300 and 3300 XL probes. The 3300 XL Proximitor Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DINrail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting "footprint" with older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates.

Part Number: 330180-91-05

Fasco U73B1 Motor
Configuration:
•Voltage: 230 V
•Frequency: 50 Hz
•Current: 0.56 A
•Sealed Ball Bearing
•Thermally Protected
•1200 rpm
(...)
• Shaft Length: Approximately 0.88 in. (2.24 cm)
Part Number: 081987
Mod Number: 71731339

Parker / Compumotor AT6400 4-Axis Indexer PC Card
This Parker Compumotor AT6400 Four-Axis Indexer PC Card is used and in excellent condition. This unit is the newer style of the AT6400.

(...)
Configuration:
• External Connector
• 1.5 / 2 MB RAM

Product Family: AT6400-AUX1, AT6400-AUX1-120V, AT6400-AUX1-240V

Part Number: PCA 71-011823-03

Cognex Checker 4G1 Vision Sensor
This unit does not include power supply, interface cables or software. Please contact manufacturer for pricing and availability.

(...)
Configuration:
• Sensor: Part Finding
• Inspection Sensors: Presence, Measurement or Position
• Maximum Inspection Rate: 400 Hz
• Lighting and Filter Options: Integrated Red, Blue, Green, and Infrared LEDs; Integrated Bright White LEDs Polarization

Part Number: 821-0070-1R, 821-0070-3R, 825-0178-1R, C4G1-24G-E00

Rockwell / Allen-Bradley 1771-IBD 10 to 30V DC Input Module
This Rockwell / Allen-Bradley 1771-IBD 10 to 30V DC Input Module is used and in excellent condition.
(...)

Rockwell / Allen-Bradley 1771-IBD Installation Instructions (pdf)

Part Number: 1771-IBD, 96134475, 96134473

GE / Bently Nevada 146031-01 I/O Module for 3500/22
This unit is also known as the 3500/22 10 Base-T/100 Base-TX I/O Module.

Part Number: 146031-01
GE / Bently Nevada 330400-02-00 Accelerometer Acceleration Transducer
Each Accelerometer has the CE, CSA, ATEX, and Brazil agency approvals engraved on the side casing.

Configuration:
(...)
• Mounting Thread Option: M8 x 1 Integral Stud

Part Number: 330400-02-00

Baccara GEM-SOL 24V DC 5.5W Coil
Configuration:
• Coil Winding Insulation: H 180°
• Temp Range: -20°C to 150°C
• Duty Cycle: 100% ED. (Coil Temp 70°C at 20°C ambient)
(...)
• Protection: IP65 with Connector
• Voltage Range: Standard Industrial Voltage 6 to 415VAC or DC

Parker / Compumotor 71-012832-05 5-Foot Auxiliary Cable
The Parker Compumotor 71-012832-05 5-Foot AUX Cable is compatible with:
• AT6400
• AT6200
(...)
• AT6250

Parker Compumotor 71-012832-05 5 Foot Auxiliary Cable Diagram (pdf)

GE / Panametrics Magna-Mike 8500 Hall Effect Precision Thickness Gage
This unit is also known as the Olympus Magna-Mike 8500 Hall Effect Precision Thickness Gage. Probes are sold separately.

Includes:
(...)
•85RPC: Rubber Protective Carrying Case
•External Power Supply/charger for 8500

Danaher Motion / IDC NextStep Single Axis Microstepping Drive
Configuration:
• AC Power Input: 90-120 VAC Single Phase, 50/60 Hz; 500 VA Max. at 7.9 amp Setting
(...)
• Motor Current: 0 - 7.9 amps, 0.1 amp Increments
• Fold Back: Automatic
• Bus Voltage: 160 VDC Nominal

National Instruments PXI-7358 8-Axis High-Performance Stepper/Servo Motion Controller
This National Instruments PXI-7358 8-Axis High-Performance Stepper/Servo Motion Controller is a demo unit that was installed but never put into commission.

This is a hybrid-slot(...)
compatible PXI module that can be used in both PXI Express hybrid slots and standard PXI slots.

Configuration:

• PXI Module
• 8 Axes

Part Numbers: 190974E-08, 190974F-08L, 190974G-08L, 778540-08

Parker / Digiplan BLHX150 Digital Positioning Servo Drive
This Parker Digiplan BLHX150 Digital Positioning Servo Drive is used and in excellent condition.

Part Number: BLHX150BN, BLHX150BP

Current Output: 15 A Continuous (30 A peak)
Oriental Motor Vexta PX243-03AA 2-Phase Stepping Motor
Configuration:
• Motor Type: 2-Phase
• Lead Wires: 6
• Step Angle: 1.8 °
• Motor Frame Size: 1.65 in. sq.
GE / Bently Nevada 330130-080-00-00 3300 XL Standard Extension Cable
Configuration:
• Cable Length: 8 m (26.2 ft.)
• Connector Protector and Cable Option: Standard Cable
(...)
• Agency Approval Option: None
Parker / Compumotor AT6400 4-Axis Indexer PC Card
This Parker Compumotor AT6400 Four-Axis Indexer PC Card is used and in excellent condition. This unit is the newer style of the AT6400.

Configuration:
(...)
• External Connector
• 64 / 512 KB RAM

Product Family: AT6400-AUX1-120V, AT6400-AUX1-NSK, AT6400-120V-NSK, AT6400 Main Only, AT6400-AUX1-240V

Part Number: PCA 71-011823-02

GE / Panametrics 8000 Magna-Mike Thickness Gauge
This does not include any probes. Please contact manufacturer for pricing and availability.
Parker / Compumotor SX6 Microstepping System
This Parker Compumotor SX6 Microstepping System is used and in excellent condition.
(...)

The SX series of Drives and Indexers utilize Compumotor's X-Language and have more complex built-in functioning. The SX6 Drive can be configured by on-board switches to be any of the following models:

SX57-51, SX57-83, SX57-102, SX83-62, SX83-93, SX83-135

If you would like an ATG technician to set the switches to configure the SX6 to one of these particular models, please let us know when placing the order.

If the High Voltage Home inputs are needed, please contact for pricing and availability.

Input Voltage: 120 V

This model is also known as the Electric Cylinder Control S5201.

Danaher Motion / Superior Electric SS2000D6 Motor Driver
This Driver is also known as a Warner Electric SS2000D6 Motor Driver.

Configuration:
• Input Voltage: 115 VAC
(...)
• Output Current: 1.0-6.0 Amps
Danaher Motion / Superior Electric SS2000MD4-M Motor Driver
Configuration:
• Input Voltage: 24-40 VDC
• Output Current (Switch Selectable): 1.0-3.5 Amps
Parker / Compumotor ZETA4 Motor Drive
The ZETA4 Drive can be configured by on-board switches to be any of the following models:

ZETA57-51, ZETA57-83, ZETA57-102, ZETA83-62, ZETA83-93, ZETA83-135
(...)

If you would like an Artisan Technology Group technician to set the switches to configure the ZETA to one of these particular models, please let us know when placing the order.

Input Voltage: 120 VAC Only

Yaskawa DP9320081-3 10m Power Cable
This Yaskawa DP9320081-3 10m Power Cable is new from surplus stock.
GE / Bently Nevada 330400-01-05 Accelerometer Acceleration Transducer
Each Accelerometer has the CE, CSA, ATEX, and Brazil agency approvals engraved on the side casing.

Configuration:
(...)
• Mounting Thread Option: 1/4-28 UNF Integral Stud

Part Number: 330400-01-05

Oriental Motor ASD18B-KDN-B6 Stepping Motor Driver
This Oriental Motor ASD18B-KDN-B6 Stepping Motor Driver is used and in excellent condition.
OMRON G71-ID16 Remote Interface Module
This OMRON G71-ID16 Remote Interface Module is new from surplus stock. This item ships in the original manufacturer's packaging.

Configuration:
• Input Voltage: 24 VDC
Stober Posidrive FAS4028 Frequency Inverter
Configuration:
• Externally Ventilated
• Recommended Motor Power: 1.5 kW
• Nominal Current: 3 x 4.0 A
(...)
• Power Fuses: 3 x 10 AT
• Power Loss: 60 W


Parker / Compumotor ZETA6104 4A Motor Drive (Without V_I/O Pin Option)
The ZETA6104 Drive can be configured by on-board switches to be any of the following models: ZETA6104-57-51, ZETA6104-57-83, ZETA6104-57-102, ZETA6104-83-62, ZETA6104-83-93, ZETA6104-83-135
(...)

If you would like an Artisan Technology Group technician to set the switches to configure the ZETA to one of these particular models, please let us know when placing the order.

Input Voltage: 95-132 VAC Only

Kollmorgen / Danaher Motion / G&L ASIU-A4 Analog Servo Interface Unit
This Kollmorgen / Danaher Motion / G&L ASIU-A4 Analog Servo Interface Unit is used and in excellent condition.

Configuration:
(...)
• Analog Outputs: 4
• Encoder Inputs: 5
• Drive Interface Inputs (24 VDC): 4
• Drive Interface Outputs (24 VDC): 8
• Axis Fast Inputs: 5
• General Purpose Inputs (24 VDC): 28

Part Number: M.1300.4422, M.1300.7462

Danaher Motion / Superior Electric SS2000D6 Motor Driver
This unit has some minor wear due to storage.

Configuration:
• Input Voltage: 115 VAC
(...)
• Output Current: 1.0-6.0 Amps

GE / Bently Nevada 330400-02-00 Accelerometer Acceleration Transducer
This unit ships in the original manufacturer's packaging. Each Accelerometer has the CE, CSA, ATEX, and Brazil agency approvals engraved on the side casing.

(...)
Configuration:
• Mounting Thread Option: M8 x 1 Integral Stud

Part Number: 330400-02-00

National Instruments ER-16 Electromechanical SPDT Relay
This unit is missing the top cover; however, this will not prevent it from functioning properly.

Configuration:
• Number of Channels: 16
(...)
• Relay Type: SPDT Non-Latching

Part Number: 183064B-02, 777081-01

View Photo of missing the top cover.

National Instruments UMI-7764 Universal Motion Interface
Configuration:
• Axes: 4
• Inputs: Quadrature, Incremental
• Single-Ended Input Threshold: TTL/CMOS
• Range: 0 to 5 VDC
(...)
• Maximum Quadrature Frequency: 20 MHz
• Compatibility: Single Pass-Through

Part Number: 186343C-01, 186343C-02, 777978-02, 186343B-01, 186343D-02L

Parker / Compumotor AH-Drive Microstepping Controller
This Parker / Compumotor AH-DRIVE Microstepping System is used and in excellent condition. The AH (High) has a max current of 6A. The A Drive can be configured by on-board switches to be any of the(...) following models:

A83-62, A83-93, A83-135, A106-120, A106-178, A106-205

If you would like an ATG technician to set the switches to configure the A to one of these particular models, please let us know when placing the order.

Input Voltage: 120 VAC Only

Lenze EPM-T110 CAN Gateway Module
This Lenze EPM-T110 CAN Gateway Module is used and in excellent condition.

Specifications:

• DC Voltage: 24
(...)
• Connections: 9-Pin Sub-D
• Optocoupler Electrical Isolation
• Interface: System Bus CAN
• Baud Rate: 10kBps to 1MBps
• Numbers of Bus: Max 63
• Electronics Per Station: Max 32

Schneider Electric / ELAU MC-4/11/03/400 PowerDrive Motion Controller
Configuration:
• Phases: 3
• Rated Connection Voltage: AC 380 V (-10%) to 480 V (+10%)
(...)
• Control Voltage/Power: DC 24 V (-15% / +25%) / 1A
• Electronics Supply: Approx. 12 W
• Ventilation: Natural Convection

Part Number: 13 13 02 45

National Instruments PCI-7334 Motion Controller
This National Instruments PCI-7334 Motion Controller ships in the NI static bag. The PCI-7334 can control up to (4) axes of stepper motors.
(...)

Part Number: 190979C-04, 190979D-04L, 186307E-03, 186307C-06, 778417-01

Parker / Compumotor Gemini GT6-L8 / GT6-L8-NK Microstepping Drive
This Parker Compumotor Gemini GT6-L8 / GT6-L8-NK Microstepping Drive is used and in excellent condition.

Configuration:
(...)
• GT6: Basic Drive/Controller
• L8: 120 VAC Input Voltage, 8A Peak Continuous Current
• NK: No Kit

Ajax Loader

Loading Next...

Contact Us
Fax:

(240) 376-1381