Items/Page
Showing 1-100 of 50505 Results
This is a custom unit for the YSI 2700 SELECT Biochemistry Analyzer.

Part Number: 015091
Configuration:
• Primary: 0-115 Volts
• Secondary: 0-9 Volts
• Recommended Secondary Fuse: 1.6 AT

Unit is attached to PCB.
This unit has a power cable installed.

Configuration:
• Cable Length: 5.5 Feet
Configuration:
• Approximate Length: 3 ft
Configuration:
• Approximate Length: 2 ft
This unit was ordered without the outer heatsink.

Configuration:
• Processor: 850 MHz Pentium III
Configuration:
• Approximate Length: 4 ft
This unit is the SR2510 Chassis configured as follows:

(2) I/O Boards Installed with (2) I/O Boards.
(2) I/O Boards Installed with (4) CMOS5V I/O Boards.

This unit has 64k vector memory depth.

Configuration:
• Approximate Length: 2 ft
Part Number: 9000-30-052, 1700-37-053-20, AMAT 0190-12662
This is a custom unit for the BD BACTEC 9050 Blood Culture System.

Part Number: 905-0103-02
This unit ships in the manufacturer's sealed packaging.

Part Number: 185152D-01, 777518-100
Configuration:
• Bit Rate: 1 Gb/s
• Half-Duplex Rate: 102.7 MB/s
• Full-Duplex Rate: 200 MB/s
• Media: Copper
• Ports: (1) HSSDC

• 3-Port Hub: No

Part Number: 85942330, 85941180, 85942330

This Board has the PBTFAN PCB-C Installed.

Configuration:
• 66MHz PCI Analyzer with 64K Trace Memory, 66MHz Exerciser
Configuration:
• Measurement Range: ±245 m/s2 (g) (±25m/s2 (g))

• Frequency Range: 10 to 1000 Hz (600 to 60,000 Hz)
• Settling Time (ms): ≤300 ms
• Broadband Electrical Noise: 14.7 (1.5) mm/s2 (mg)

Part Number: 200150

This unit includes a mounting arm.

Configuration:
• Aperture Size: 14mm

• Driver Compatibility: Use with VCM-D1
• Housing: #2 Housing
• Blade Coating: Low Energy (Teflon)
• Electronic Sync: Included

Part Number: VS14S2T1

Configuration:
• Processor Frequency: Both at 2.4 GHz
• Processor Bus Speed: Both at 533 MHz
• Processor Cache: Both at 512 KB

• Memory: 4 GB SDRAM

Part Number: 4BP07220D1
Daughtercard Part Number: 4BP7220IB1

This item was ordered without a faceplate; however, this will not prevent it from functioning properly.

Configuration:

• HDD: 1441.9 MB

Part Number: 1700-23-033-00

Configuration:
• 800 MHz Intel Pentium III Processor
• 256 MB Memory

• Hard Drive: 30 GB

Part Numbers: 350-657325-148 A, 350-657325-148 C, 332-657325-000 A, 333-000446-000 B

Configuration:
• Approx. Length: 5 m
• 3.5mm Connector
M092-FC08 Motor:
• Frame Diameter: 3.4"
• Double Stack
• 6 Lead Connection
• Coil Rating: 08
M092-FD-429U Motor:
• Frame Diameter: 3.4"
• Double Stack
• 6 Lead Connection
• Coil Rating: 429U
Configuration:
• Output Range: 0-6 Volts; 0-10 Amps
• Voltage Mode Output Impedance: 12 μΩ
• Current Mode Output Impedance: 12 kΩ
Configuration:
• Spectral Response Range: 400 to 1000 nm
• Photosensitive Area: Φ0.5 mm

• Quantum efficiency (λ=800 nm): 70%
• Cutoff frequency (-3 dB)
  • High Band: 1 GHz
  • Low Band: 50 kHz

This unit is an incomplete part for the PCI-7030 and it is not fully functional. It is to be used for parts and has been priced accordingly.

Part Number: 183960A-01
This unit is an incomplete part and it is not fully functional. It is to be used for parts and has been priced accordingly.
Configuration:

• SDRAM: 256 MB

Part Number: 191816B-01

Part number: 106830

This unit also comes with an I/O-720 companion board which supports two on-board PMC slots, SVGA graphics and Fast/ Wide SCSI. The board contains a secondary PCI
bridge which supports additional expansion and includes the CPCI-720/SVGA-ACCKIT daughter card.

PENT/CPCI-760/256-500-L256-16
• 256: 256 MB On-Board SDRAM
• 500: 500 MHz Intel Pentium III Processor - Low Power
• L256: 256 KByte 2nd Level Cache
• 16: 16 MB Flash Disk at Primary EIDE

Part Numbers: PCA IO-720/HS, 106526

This unit is an incomplete part and it is not fully functional. It is to be used for parts and has been priced accordingly.

Configuration:

• SDRAM: 512 MB

Part Number: 191816B-01

This unit is an incomplete part for the PXIe-5186 and it is not fully functional. It is to be used for parts and has been priced accordingly.
This unit is an incomplete part and it is not fully functional. It is to be used for parts and has been priced accordingly.

Part Number: 192664E-01
This unit is an incomplete part for the PCI-5112 and it is not fully functional. It is to be used for parts and has been priced accordingly.

Part Number: 186480B-01
This unit is an incomplete part for the PXI-5404 and it is not fully functional. It is to be used for parts and has been priced accordingly.

Part Number: 187342C-01
This unit is an incomplete part for the PXI-5122 and it is not fully functional. It is to be used for parts and has been priced accordingly.

Part Number: 190100A-03, 188526C-01
This unit is an incomplete part of the PXI-6040E and it is not fully functional. It is to be used for parts and has been priced accordingly.

Part Number: 184361A-02
This unit is an incomplete part for the PXI-5122 and it is not fully functional. It is to be used for parts and has been priced accordingly.

Part Number: 187871G-01
Absolute encoder battery sold separately.

SGDA-04ASY238

• 400 W (0.54HP) Rated Capacity

• 200-230 V AC Input
• 230 V Max Output
• Speed/Torque Control (Analog Input)
• Speed Control Range 1:5000

SGD-04AS:

• 400 W Rated Capacity
• 200-230 VAC, 50/60 Hz Input
• Speed/Torque Control

• Works with SGM Servomotor
SGD-02AS:

• 200 W Rated Capacity
• 200-230 VAC, 60 Hz Input
• Speed/Torque Control

• Works with SGM Servomotor
This unit is an incomplete part and it is not fully functional. It is to be used for parts and has been priced accordingly.
This item has the optical fiber interface (not copper), as well as the dual heatsink configuration.

Part Number: 186943B-02, 186943C-02


View Photo of the Heatsink Configuration.

Configuration:
• Pre-Configured Frequency Modules (Butterworth): FM500 = 500 Hz
This unit has a chipped terminal block; however, this does not affect its ability to function properly.

Configurations:
• Y2 Motor Series and Size

• 20 Nm Max Torque
• 200 VAC

View Photo of chipped terminal block.

Configurations:
• Y2 Motor Series and Size
• 20 Nm Max Torque
• 200 VAC
Configuration:
• Rated: 4.1 kVa
• Constant Torque: 3 HP
  • 100% Continuous Output: 4.8A

• Variable Torque: 3 HP
  • 100% Continuous Output: 5.4A
• Rated Input: 5.3A
• MCCB Rated: 10A
• Spec 42P21F: 1.30N/m Torque, 14AWG
• Input Voltage: 380-460 VAC
• Output Voltage: 0-460 VAC

Configuration
• Rated: 27.4 kVA
• Constant Torque: 20 HP
  • 100% Continuous Output: 32 A
• Variable Torque: 25 HP
  
• 100% Continuous Output: 36 A
• Rated Input: 35 A
• MCCB Rated: 60 A
• Spec 40151E: 1.12 Nm Torque, 14 AWG
• Input Voltage: 380-460 VAC
• Output Voltage: 0-460 VAC

This unit does not include a faceplate; however, this will not prevent it from functioning properly.

Options:

• Option: 5E0 160MHz DSP56311 CPU 256K x 24 SRAM 1M x 8 Flash
• Option: 16A 32k x 24 SRAM Battery-Backed Parameter RAM
• Option: A (Standard) MACRO-Ring Fiber Optic Interface
• Option: 2B Dual Port RAM
• Option: 1B 16 Servo, 12 I/O and 4 Communication Nodes

Configuration:
• 160 MHz DSP56311 CPU
• 256K x 24 SRAM Compiled/Assembled Program Memory
• 32K x 24 SRAM User Data Memory
• 1M x 8 Flash Memory

Part Number: 603726-109

Configuration:
• Package: 1U High
• Built-In Voltage Inputs: 8 DIFF or 16 SE

• Analog Signal Connection: DB37
• Built-in Digital I/O: 40
• Maximum Digital I/O: 272
• Analog Outputs: None
• External DAC Pacer Clock Input: Installed

This unit is an incomplete part for the PXI-5105 and it is not fully functional. It is to be used for parts and has been priced accordingly.

Part Number: 192206D-01L, 192208C-01
Options:
• Option: 5C0 80 MHz DSP56303 CPU 256Kx24 SRAM 1Mx8 Flash
• Option: 16A 32k x 24 SRAM Battery-Backed Parameter RAM

• Option: A (Standard) MACRO-Ring Fiber Optic Interface
• Option: 2B Dual Port RAM
• Option: 1A 8 Servo, 6 I/O and 2 Communication Nodes

Configuration:
• 80 MHz DSP56303 CPU
• 256Kx24 SRAM Compiled/Assembled Program Memory
• 32Kx24 SRAM User Data Memory
• 1M x 8 Flash Memory

Part Number: 603726-104

Options:
• Option: 5F3 240MHz DSP56321 CPU 1Mx24 SRAM 4Mx8 Flash
• Option: A (Standard) MACRO-Ring Fiber Optic Interface
• Option: 2B Dual Port RAM

• Option: 1D 32 Servo, 24 I/O and 8 Communication Nodes

Configuration:
• Turbo P2 Version 1.942
• 240MHz DSP56321 CPU
• 1M x 24 SRAM Compiled/Assembled Program Memory
• 4M x 8 Flash Memory

Part Number: 603726-103

Configuration:
• Input Voltage: 85-265 VAC or 100-370 VDC
• Hi-Pot Isolation: 5300 VDC
• Output Voltage and Current: 40VDC at 1A
Options:
• Option: 5F0 240MHz DSP56321 CPU 256Kx24 SRAM 1Mx8 Flash
• Option: 16A 32Kx24 SRAM Battery-backed Parameter RAM

• Option: A (Standard) MACRO-Ring Fiber Optic Interface
• Option: 2B Dual Port RAM
• Option: 1D 32 Servo, 24 I/O and 8 Communication Nodes
• Option: 12 & 12A 16-Channels 12-bit A/D Converter

Configuration:
• 240MHz DSP56321 CPU
• 256Kx24 SRAM Compiled/Assembled Program Memory
• 32Kx24 SRAM User Data Memory
• 1M x 8 Flash Memory

Part Number: 603726-105

Configuration:
• Intensity: Adjustable
• LED Color: Green, 520 to 535 nm
• Cable: 150 mm (6 in.) Pigtail with Threaded 5-Pin Euro-Style Connector
Configuration:
• Nominal Torque: 0.19 Nm
• Rated Speed: 5300 min -1
• Rated Current: 3.4 A
• Nominal Performance: 90 W
This unit has a chipped terminal block; however, this will not prevent it from functioning properly.

Configuration:

• Input Voltage: 115 VAC
• Output Voltage: 0-33V
• Output Current: 0-33A
• 47-63Hz

View Representative Photo of chipped terminal block.

The 1553 connectors are Milestek 4Z977.

Configuration:

• Main Port Splits Into Channel 1A, Channel 1B, Channel 2A, Channel 2B, Channel 3A, Channel 3B, Channel 4A, and Channel 4B Cables
• Length: 1.25 ft

Part Number: RCONRXMC2-4

Configuration:
• Input Voltage: 85-265 VAC or 100-370 VDC
• Hi-Pot Isolation: 5300 VDC
• Output Voltage and Current: 5VDC at 6A, 15VDC at 0.5A
This unit is an incomplete part for the PCI-5105 and it is not fully functional. It is to be used for parts and has been priced accordingly.

Part Number: 196318A-01
This item is also known as the XP Power AEL15US12.

Configuration:
• Input: 100-240V ~ 47-63Hz, 0.4A

• Output: 12V, 1.25A

View closeup of the label here.

Configuration:
• Nominal AC Line Voltage: 120 VAC
• Nominal Current Rating: 10 A
• 1 Cycle Surge Peak: 110 A

• Nominal Signal Input Resistance: 1000 Ω
• Signal Pick-Up Voltage: 3 VDC

This unit is an incomplete part for the PXI-5105 and it is not fully functional. It is to be used for parts and has been priced accordingly.

Part Number: 192206C-01, 192208C-01
Showing 1-100 of 50505 Results
Contact Us
Fax:

(240) 376-1381