Galil Motion Control
This Galil Motion Control DMC-1580 8-Axis Motion Controller is used and in good condition.
Part Number: DMC1580-2004
Part Number: DMC1580-2004
This Galil Motion Control DMC-1040 4-Axis Motion Controller is used and in excellent condition.
Part Number: DMC-720-PSX
This Galil Motion Control DMC-1580 8-Axis Motion Controller is used and in excellent condition.
Part Number: DMC1580-2004
Part Number: DMC1580-2004
This Galil Motion Control DMC-1010 Single Axis Motion Controller is used and in excellent condition.
The DMC-630 can control up to three servo motors.
This Galil Motion Control DMC-1020 2-Axis Motion Controller is used and in excellent condition.
Configuration:
• Axis: 4
• FIFO: Bi-Directional and Auxiliary
• Digital Inputs: 8
(...) • Digital Outputs: 8
• Configurable I/O: 64 with DB-14064
• Axis: 4
• FIFO: Bi-Directional and Auxiliary
• Digital Inputs: 8
(...) • Digital Outputs: 8
• Configurable I/O: 64 with DB-14064
This unit has the screw terminal connector for power input.
Part Number: DMC-730-PSX
Part Number: DMC-730-PSX
This Galil Motion DMC-1200MC PC/104 Optima Motion Controller is used and in excellent condition.
DMC-1200MC Schematic (pdf)
DMC-1200MC Schematic (pdf)
This Galil Motion Control DMC-1030 3-Axis Motion Controller is used and in excellent condition.
This Galil Motion Control DMC-1050 5-Axis Motion Controller is used and in excellent condition.
The DMC-620 can control up to two motors.
This Galil Motion Control DMC-1540 4-Axis Motion Controller is used and in excellent condition.
This unit has the standard IEC connector for power input.
Part Number: DMC-730-PSX
Part Number: DMC-730-PSX
This Galil Motion Control AXB-1204 PC/104 Axis Board is used and in excellent condition.
This item does not include either the DMC-1200MC or a DMC-12x0 axis board.
This item does not include either the DMC-1200MC or a DMC-12x0 axis board.
This Galil Motion Control DMC-1080 8-Axis Motion Controller (Main Board Only) is used and in excellent condition. This unit is just the main ISA controller.(...) This should only be used as a replacement for the main ISA board. Its does not include the required Galil DB-1004 board and cable for DMC controllers (like the DMC-1080) that are programmed to control above (4) Axes.
This Galil Motion Control DB10072 Daughter Card is used and in excellent condition.
This Galil Motion Control DMC-1530-72 3-Axis Motion Controller is used and in excellent condition. It has 3-axis and 72 I/O.
This Galil Motion Control DMC-1530 3-Axis Motion Controller is used and in excellent condition.
This Galil Motion Control DMC-1540 4-Axis Motion Controller Board is used and in excellent condition. This is a replacement card for the DMC-1500 Stand-Alone Motion Controller.
Part Numbers: D150n10g
Part Numbers: D150n10g
This unit has the screw terminal connector for power input.
Configurations:
• 3 Uncommitted Digital Inputs, 3 Digital Outputs
• 90-260 Vac
• Ethernet Port
• 3 Uncommitted Digital Inputs, 3 Digital Outputs
• 90-260 Vac
• Ethernet Port
Configuration:
• Axis: 2
• FIFO: Bi-Directional and Auxiliary
• Digital Inputs: 8
(...) • Digital Outputs: 8
• Configurable I/O: 64 with DB-14064
• Axis: 2
• FIFO: Bi-Directional and Auxiliary
• Digital Inputs: 8
(...) • Digital Outputs: 8
• Configurable I/O: 64 with DB-14064
This Galil Motion Control PC-MATE-10 3-Axises Motor Control is used and in good condition. The cable latch for the X-, Y-, and/or Z-Encoder; DMC600; and/or AUX interface are broken.(...) This does not affect the functionality of this unit.
This Galil Motion Control DMC-1416 Motion Controller is used and in excellent condition.
Configuration:
(...) • Axix: Single
• Digital Inputs: 7
• Digital Outputs: 3
• Analog Outputs: 2
• Power Amplifier: Brush
Configuration:
(...) • Axix: Single
• Digital Inputs: 7
• Digital Outputs: 3
• Analog Outputs: 2
• Power Amplifier: Brush
This Galil Motion Control DMC-1415 Single Axis Motion Controller Card is used and in excellent condition. This board does not have an Ethernet port.
(...) Configuration:
• 7 Uncommitted Digital Inputs, 3 Digital Outputs
• RS232
(...) Configuration:
• 7 Uncommitted Digital Inputs, 3 Digital Outputs
• RS232
This unit has the standard IEC connector for power input.
Part Number: DMC-740-PSX
Part Number: DMC-740-PSX
This Galil Motion Control DMC-1540-72 4-Axis Motion Controller is used and in excellent condition. It has 4-axis and 72 I/O.
This Galil Motion Control DMC-1040 4-Axis Motion Controller is used and in excellent condition. This unit does not have a face plate.
This Galil Motion Control DMC-8240-F 4-Axis ISA Motion Controller is used and in excellent condition.
The Galil Motion Control DB-12064 64 I/O Expansion Board for DMC-12x0 is used and in excellent condition.
Configuration:
• Axis: 1
• FIFO: Bi-Directional and Auxiliary
• Digital Inputs: 8
(...) • Digital Outputs: 8
• Configurable I/O: 64 with DB-14064
• Axis: 1
• FIFO: Bi-Directional and Auxiliary
• Digital Inputs: 8
(...) • Digital Outputs: 8
• Configurable I/O: 64 with DB-14064
This Galil Motion Control DMC-8230-F 3-Axis ISA Motion Control (Female Connector) is used and in excellent condition.
Configuration:
• Axis: 3
• FIFO: Bi-Directional and Auxiliary
• Digital Inputs: 8
(...) • Digital Outputs: 8
• Configurable I/O: 64 with DB-14064
• Axis: 3
• FIFO: Bi-Directional and Auxiliary
• Digital Inputs: 8
(...) • Digital Outputs: 8
• Configurable I/O: 64 with DB-14064
The DMC-631 can control up to three servo motors.
The DMC-631 is an enhanced version of the DMC-630. This enhancement consists of both firmware and hardware modifications.
The DMC-631 is an enhanced version of the DMC-630. This enhancement consists of both firmware and hardware modifications.
The DMC-610 can control one servo motor.
This Galil Motion Control DMC-1410 Motion Control Card is used and in excellent condition.
(...) • Single-Axis 7-Inch ISA Card
• Bi-Directional, High Speed FIFO Buffer
• 37-Pin D Connector
• CE Certified
DMC-1410:
(...) • Single-Axis 7-Inch ISA Card
• Bi-Directional, High Speed FIFO Buffer
• 37-Pin D Connector
• CE Certified
This Galil Motion Control ICM-2900 Interconnect Module is used and in excellent condition.
This Galil Motion Control DMC-2280 Optima Motion Controller is used and in excellent condition.
Model Number: DMC-2280: 8-axis Ethernet 10/100BASE-T, RS232
Model Number: DMC-2280: 8-axis Ethernet 10/100BASE-T, RS232
This Galil Motion Control DMC-1540 4-Axis Motion Controller Board is used and in excellent condition. This is a replacement card for the DMC-1500 Stand-Alone Motion Controller.
Part Number: D150n10d
Part Number: D150n10d
New Arrivals
Galil Motion Control
