This Galil Motion Control DMC-1040 4-Axis Motion Controller is used and in excellent condition.
Show More Description
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Features:
- 8 MHz Encoder Input Frequency
- 16-Bit Motor Command Output DAC
- 1-4 Axes per Card
- Interfaces with Stepper Motors, Servo Motors, and Hydraulic Systems
The DMC-1000 series motion controller is a state-of-the-art motion controller that plugs into the PC Bus. Performance capability of the DMC-1000 series controllers includes: 8 MHz encoder input frequency, 16-bit motor command output DAC, +/-2 billion counts total travel per move, sample rate at up to 125 usec/axis, bus interrupts and non-volatile memory for parameter storage. These controllers provide high performance and flexibility while maintaining ease of use and low cost.
Designed for maximum system flexibility, the DMC-1000 is available for one, two, three or four axes configuration per card. An add-on card is available for control of five, six, seven or eight axes. The DMC-1000 can be interfaced to a variety of motors and drives including step motors, servo motors and hydraulic systems.
Each axis accepts feedback from a quadrature linear or rotary encoder with input frequencies up to 8 million quadrature counts per second. For dual-loop applications in which an encoder is required on both the motor and the load, auxiliary encoder inputs are included for each axis.
The DMC-1000 provides many modes of motion, including jogging, point-to-point positioning, linear and circular interpolation, electronic gearing and user-defined path following. Several motion parameters can be specified including acceleration and deceleration rates and slew speed. The DMC-1000 also provides S-curve acceleration for motion smoothing.
For synchronizing motion with external events, the DMC-1000 includes 8 opto-isolated inputs, 8 programmable outputs and 7 analog inputs. An add-on daughter with additional inputs and outputs or for interfacing to OPTO 22 racks. Event triggers can automatically check for elapsed time, distance and motion complete.
Despite its full range of sophisticated features, the DMC-1000 is easy to program. Instructions are represented by two letter commands such as BG to begin motion and SP to set motion speed. Conditional Instructions, Jump Statements, and Arithmetic Functions are included for writing self-contained applications programs. An internal editor allows programs to be quickly entered and edited, and support software such as the Servo Design Kit allows quick system set-up and tuning.
The DMC-1000 provides several error handling features. These include software and hardware limits, automatic shut-off on excessive error, abort input, and user-definable error and limit routines.
Artisan Scientific Corporation dba Artisan Technology Group is not affiliated with or a distributor for Galil Motion Control. The depiction, description, or sale of products featuring names, trademarks, brands, and logos is for identification and/or reference purposes only and does not indicate any affiliation with or authorization by any rights holder.
I found that the staff is very knowledgeable. I would recommend them to anyone looking for this type of equipment!
Great company with great people. Always a pleasure to do business with Artisan!
We found Artisan when our PXI Chassis broke, which shut down our production line. We were up and running in less than a day because they shipped overnight and talked our tech guys through the installation over the phone. ATG saved the day big time!
We have ordered parts from Artisan multiple times. It’s hard to find quality parts for almost extinct equipment!