More Information
Features:
- 1-Slot, C-size, VXI Module
- Twelve 8-bit Input or Output Data Ports
- Wide Variety of Output Data Types
- Data Port Readback on a Per-Port Basis
- Control of Interface Driver Tri-state Capability
- Block Mode Transfer to/from Memory
The Agilent E1458A 96-Channel Digital Input/Output module is a C-size, 1-slot, register-based VXI module that offers twelve 8-bit bi-directional data ports. It provides block memory transfers and six GPIO handshake protocols (none, leading edge, trailing edge, pulse, partial, and strobe) for a wide range of applications.
Functionally similar to the E1330B, the E1458A is intended for digital I/O control applications such as digital subassembly test or data acquisition and control. Each of the 12 identical ports consists of eight data lines and six handshake/control lines.
Each 8-bit port is individually configured for positive/negative true logic and read/write or tri-state condition. The E1458A is arranged into three banks of four ports each. Ports can be combined within a bank, allowing data transmission using bytes, words (16-bit), or long words (32-bit). Data transmission can be from a single port (8-bits) or from multiple ports up to all 12 ports.
The E1458-61601 Agilent Cable Assembly (2 m) may still be available for purchase and support from Artisan Technology Group beyond End-Of-Life (EOL) by the manufacturer (OEM).
Functions
Provides shielded signal interconnection between test instruments and device under test or between modular instruments within automated test systems. Transmits analog and digital signals while maintaining signal integrity through controlled impedance design and electromagnetic shielding. Features precision-matched connectors for repeatable electrical performance across frequency ranges. Enables remote positioning of instruments from measurement points while minimizing signal degradation, noise pickup, and crosstalk. Supports high-speed data transmission and low-level analog measurements in RF, microwave, and general-purpose test applications.
Platforms
This 2-meter cable assembly is designed for signal transmission within electronic test and measurement systems. It provides RF and microwave signal connectivity between test equipment, such as signal generators, analyzers, and other devices. The assembly typically utilizes precision connectors like SMA, N-type, or other RF connectors for reliable signal transfer at high frequencies with minimal signal loss or impedance mismatch, adhering to specific impedance standards.
Applications
Designed for high-frequency signal transmission, this cable assembly provides low-loss connectivity within test and measurement systems. It is optimized for use in benchtop and rack-mounted instruments, ensuring minimal signal degradation and consistent impedance matching. Connects precision instruments and devices requiring stable RF and microwave signal paths, supporting calibration, diagnostics, and interconnection tasks in laboratory and industrial environments. Applicable in vector network analysis, signal integrity testing, and calibration routines to maintain accurate and repeatable measurement results.
Specifications
2-meter cable assembly designed for high-frequency and precision measurement applications. Provides secure and reliable connectivity between test instruments and devices under test. Compatible with test equipment operating in electronic research and development settings. Supports seamless data and power transmission with minimal interference and signal loss. Incorporates standardized connectors for ease of integration with existing test setups. Suitable for laboratory environments, supports various electronic test scenarios, and is essential in ensuring accurate signal measurement and analysis in RF and microwave testing.
This section includes content generated with the assistance of artificial intelligence (AI) tools. AI is used to increase efficiency and provide timely information. Please note that the content may not have been reviewed for accuracy or completeness. Use this information at your own discretion, and verify details independently as needed.
Agilent E1458-61601 Cable Assembly (2 m) Specs
| General |
| Manufacturer | Keysight / Agilent / HP |
| Model | E1458-61601 |
| Condition | New From Surplus Stock |
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Artisan Scientific Corporation dba Artisan Technology Group is not affiliated with or a distributor for Agilent. The depiction, description, or sale of products featuring names, trademarks, brands, and logos is for identification and/or reference purposes only and does not indicate any affiliation with or authorization by any rights holder.
Cable Assembly (2 m) Price & Specs