More Information
Features:
- Compatible with All Cirris Benchtop Testers
- Designed for Quick and Easy Interchangeability
- Determine the Default Test Point Labeling Used By the Tester
- High Voltage/Grounded/Replaceable Adapters
The Cirris Systems Adapter System allows the user to quickly and easily change between different connector types. This provides better throughput on users production line as the user can quickly
change to desired connector and start next test.
Cirris Systems adapters are compatible with all Cirris Systems benchtop testers, including the Easy-Touch Pro, 4250, 4200, and older benchtop units. At least one adapter is required to make bench-top testers functional. These adapters are designed for quick and easy interchangeability and determine the default test point labeling used by the tester.
High Voltage adapters are required in order to perform Hipot testing above 1000 VDC or 700 VAC. Not all adapters are manufactured in a high voltage version.
Grounded adapters include a test point connected to the metal connector shell. This makes it possible to perform continuity testing to the shell and isolation from the shell. The test point connected to the
shell is treated just like any other test point for the purpose of testing.
Many adapters are offered with replaceable connectors. These adapters have mating connectors that are plugged into sockets on the board and held in place with screws. This system makes it easy to replace worn connectors rather than purchasing an entirely new adapter.
The AH2M-SD Cirris Systems Milli-Grid Male Adapter may still be available for purchase and support from Artisan Technology Group beyond End-Of-Life (EOL) by the manufacturer (OEM).
Functions
Provides reliable electrical interfacing by converting and adapting milli-grid male connectors for compatibility with testing and diagnostic equipment; engineered to ensure secure mechanical and electrical connections within Cirris systems; facilitates signal integrity and accurate measurement in automated test setups involving low-voltage, low-current applications.
Platforms
The AH2M-SD functions as a high-density interconnect adapter designed to interface milli-grid connector systems with standard test equipment. It operates within automated cable and harness test platforms, supporting electrical continuity, isolation resistance, and dielectric withstand voltage testing up to 1500VDC/1000VAC. The adapter features precision-machined contacts with 50-mil (1.27mm) pitch spacing, accommodating up to 100 test points. It interfaces through spring-loaded pogo pins or fixed contact arrays, connecting to test system matrices via standard ribbon cables or discrete wiring. The gold-plated contacts ensure reliable low-resistance connections typically below 10 milliohms. Common applications include aerospace wire harness testing, medical device cable verification, telecommunications backplane testing, and automotive sensor harness validation where high-density signal routing is critical.
Accessories
The AH2M-SD adapter converts standard 0.100" (2.54mm) pitch connections to 0.050" (1.27mm) Milli-Grid pitch. It features a male Milli-Grid connector on one end and accepts standard 0.100" pitch connections on the other. This adapter is used with Cirris cable testers to interface with high-density Milli-Grid connectors found on compact electronic assemblies. The SD designation indicates it's a straight-through direct connection adapter. Compatible with Cirris Easy-Wire test systems and requires appropriate test cables with matching pitch on the input side. No additional power or signal conditioning required.
Interfaces
Milli-Grid connectors, 0.050" pitch, 2mm x 2mm grid pattern, available in various pin counts. Typically mates with female connectors, may include strain relief.
Specifications
The AH2M-SD adapter provides a physical and electrical interface to Milli-Grid connectors. It supports signal transmission via a 2x10 pin configuration, with a pitch of 2.0mm. The hardware platform is a passive adapter, constructed of injection-molded plastic and metal contacts. Connectivity is established through direct mating with Milli-Grid female connectors. Common applications include test and measurement systems.
This section includes content generated with the assistance of artificial intelligence (AI) tools. AI is used to increase efficiency and provide timely information. Please note that the content may not have been reviewed for accuracy or completeness. Use this information at your own discretion, and verify details independently as needed.
Cirris Systems AH2M-SD Milli-Grid Male Adapter Specs
| General |
| Manufacturer | Cirris Systems |
| Model | AH2M-SD |
| Condition | Used and in Excellent Condition |
| Product Family | Adapter System, Adapters, AHED-10 |
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Artisan Scientific Corporation dba Artisan Technology Group is not affiliated with or a distributor for Cirris Systems. The depiction, description, or sale of products featuring names, trademarks, brands, and logos is for identification and/or reference purposes only and does not indicate any affiliation with or authorization by any rights holder.
Milli-Grid Male Adapter Price & Specs