Features:
- 3-Phase Brushless Motor Drives the Rotating Equipment
- Equipped with an Interlock System
- Intuitive Control Panel; Set and Control Speed, G-Force, Temperature (CL30R), and Run Time
The Electron CL30 / CL30R Series Centrifuges are designed for laboratory use.
They will separate the components of fluids into layers of varying
density by subjecting them to high forces.
Centrifugal force provided by the centrifuge can also be used to drive
solvents and low molecular weight solutes through the membrane of a
filtering device. Retained macrosolutes will therefore be found above
the membrane.
Relative Centrifugal Force (RCF) generated by a rotor is directly proportional to its sedimentation useful radius and to the value of its
speed squared.
A control system permits the user, through an extremely intuitive
control panel, to set and control the speed, the g-force, the temperature
(on the thermostated and refrigerated versions) and the run time, as
well as to view different messages and warnings.
The Electron CL30 is a ventilated unit. A permanent air circulation reduces the
heat level in the bowl. However, the temperature in the bowl can reach 10°C above the
ambient temperature after hours of continuous operation.
The Electron CL30R is equipped with a powerful refrigeration system that allows
samples to be processed at low temperature. The refrigerant, R134a, is
free of CFC (Chloro-Fluoro-Carbons) in accordance with the Montreal
Protocol directions for preservation of the ozone layer in the atmosphere.
The actual temperature in the bowl is continuously displayed on the
front panel of the centrifuge. Under certain conditions (high speed,
long duration runs) the sample temperature can be higher than the
bowl temperature on the display. In this case, the user may compensate
manually after empirical determination of the temperature differential.
The CL30R Thermo Electron Centrifuge may still be available for purchase and support from Artisan Technology Group beyond End-Of-Life (EOL) by the manufacturer (OEM).
Artisan Scientific Corporation dba Artisan Technology Group is not affiliated with or a distributor for Thermo Electron. The depiction, description, or sale of products featuring names, trademarks, brands, and logos is for identification and/or reference purposes only and does not indicate any affiliation with or authorization by any rights holder.