More Information
Features:
- Single and Dual Outputs
- Dual Range Output
- 30 to 100 W Output Power
- Front and Rear Output Terminals
- Over-Voltage Protection
- Remote Sensing
The HP E364xA Series Programmable DC Power Supplies provide great performance at a great
price. The HP E364xA Series Programmable DC Power Supplies deliver clean
power, excellent regulation, fast
transient response and built-in GPIB
and RS-232 interfaces. They are
designed to meet the needs of R&D
design verification, production testing,
QA verifications, and other demanding
applications with Agilent
Technologies's quality and reliability.
With 0.01 percent load and line
regulation, E364xA power
supplies are able to maintain a steady
output when power line and load
changes occur. They also specify
normal mode voltage noise and low
common mode current noise. The
low normal mode noise specification
assures clean power for precision
circuitry applications, and the low
common mode current provides
isolation from power line current
injection. E364xA Series power
supplies specify less than 90 msec
of voltage settling time at any output
load condition.
The E364xA Series power supplies
support any PC with a GPIB (IEEE-488)
card or RS-232 interface. The easy-to-use SCPI
(Standard Commands for
Programmable Instruments) allow fast
and simple programming procedures.
Besides, the user manual provides
sufficient information on programming
for all end users, from beginners to
veterans.
An easy-to-use rotary knob and self-guiding keypads allow the user to set the
output at their desired resolution
without any effort. Also, both voltage
and current levels can be set to a
maximum resolution of 10 mV/1 mA
from the front panel. In addition, the user
can store and recall for up to five
complete power supply setups using
the internal non-volatile memory.
The output on/off button sets the
output to zero. If the user owns a dual
output model, they can view two
voltages or currents that are displayed
simultaneously.
The E364xA Series power supplies give users the flexibility to select from dual
output ranges. Output load is
protected against overvoltage, which
can be easily monitored and adjusted
from the front panel and remote
interface. Remote sensing has been manufactured
in the rear terminal to eliminate errors
caused by voltage drops on the load
leads. These power supplies offer new
versatile binding posts on the front
panel and screw-type terminals on the
rear panel. New front panel binding
posts allow the user to use safety test
leads as well as conventional banana
clips and stripped wires. An optional
rackmount kit has been manufactured. The Agilent
E364xA Series employs a cooling
fan with automatic speed control to
reduce the acoustic noise.
The HP E3648A Programmable DC Power Supply may still be available for purchase and support from Artisan Technology Group beyond End-Of-Life (EOL) by the manufacturer (OEM).
Functions
Dual-output power supply with 0-8V/5A and 0-20V/2.5A ranges, enabling precise voltage/current settings through front panel or remote programming via GPIB/RS-232 interfaces; supports auto-series and auto-parallel connections for higher voltage/current outputs; features overvoltage, overcurrent protection, fast transient response, low output noise; built-in voltage/current meters for monitoring; extensive programming capabilities allow integration into automated test setups; Local/Remote control capability allows switch between manual and computer control.
Platforms
Provides dual independent isolated outputs with 0-8V/5A or 0-20V/2.5A ranges per channel, featuring constant voltage and constant current operation modes. Interfaces include GPIB/IEEE-488 and RS-232 for remote programming and readback of voltage, current, and status. Front panel offers rotary encoders and numeric keypad for precise setpoint control with 4-digit LED displays. Supports SCPI command set for automated test systems integration. Common applications include powering and characterizing electronic circuits, semiconductor device testing, battery charging/simulation, and providing bias voltages in R&D labs and production test environments.
Applications
General-purpose benchtop R&D, design validation, and automated test equipment (ATE) system integration. Suitable for powering and characterizing mixed-signal circuits, semiconductors, and electronic components. Used in production line testing, device burn-in, and quality assurance. Ideal for educational labs and service/repair applications requiring stable, programmable DC voltage and current with remote sense capability for accurate load regulation.
This section includes content generated with the assistance of artificial intelligence (AI) tools. AI is used to increase efficiency and provide timely information. Please note that the content may not have been reviewed for accuracy or completeness. Use this information at your own discretion, and verify details independently as needed.
HP E3648A Programmable DC Power Supply Specs
| General |
| Manufacturer | Keysight / Agilent / HP |
| Model | E3648A |
| Condition | New From Surplus Stock |
| Product Family | E364xA Series, E3648A |
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Artisan Scientific Corporation dba Artisan Technology Group is not affiliated with or a distributor for HP. The depiction, description, or sale of products featuring names, trademarks, brands, and logos is for identification and/or reference purposes only and does not indicate any affiliation with or authorization by any rights holder.
Programmable DC Power Supply Price & Specs