More Information
Features:
- Provides Standard Bit and Block Error Tests
- Measures Errored Seconds, Percent Error-Free Seconds
- Measures Timing Delay, and Parity Errors
The Keysight 4925B Bit Error Rate Test Set provides the standard bit and block error tests and also measures errored seconds, percent error-free seconds, timing delay, and parity errors over both RS-232- C/V.24 and V.35. Complete data testing is available from the 4925B from 75 b/s to 19.2 kb/s for asynchronous framed or unframed systems. In synchronous systems where the 4925B provides the clock, data rates up to 72 kb/s are available, which makes the 4925B ideally suited for complete DDS testing.
Increased flexibility is afforded by a complete breakout box. You can manipulate and monitor individual signal lines on the RS-232- C/V.24 interface or crosspatch any line from the DCE side of the
interface to the DTE side. The 4925B also transmits the FOX message using a 5-bit baudot, 6-bit EBCD, 7-bit ASCII, or 8-bit EBCDIC code to terminals and printers. It includes detection and
annunciation of dropouts, clock slips, and RTS-CTS delay time. Three separate start-up tests, end-to-end, loopback and BELL 208B modem, enable dynamic testing of modems, which makes the 4925B extremely useful in isolating faults related to automatic equalization.
The Keysight 4925B is powered by six 9-volt alkaline transistor batteries, allowing greater than 50 hours of RS-232-C/V.24 operation. An ac module (18185A or 18194A) is recommended for use with V.35 interfaces.
The 18184A Keysight V.35 Interface may still be available for purchase and support from Artisan Technology Group beyond End-Of-Life (EOL) by the manufacturer (OEM).
no_ai_desc
Keysight 18184A V.35 Interface Specs
| General |
| Manufacturer | Keysight / Agilent / HP |
| Model | 18184A |
| Condition | Used and in Excellent Condition |
| Product Family | 4925B |
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Artisan Scientific Corporation dba Artisan Technology Group is not affiliated with or a distributor for Keysight. The depiction, description, or sale of products featuring names, trademarks, brands, and logos is for identification and/or reference purposes only and does not indicate any affiliation with or authorization by any rights holder.
V.35 Interface Price & Specs