P1-120-01-0-0 Control Microsystems SCADAPack Programmable Logic Controller - Conformal Coated

The Schneider Electric / Control Microsystems SCADAPack Series Programmable Logic Controllers are flexible controllers complete with integrated power supply, analog and digital I/O and serial communications. The product uses Modbus RTU, Modbus ASCII and DNP3 as native protocols and is remotely programmable through a choice of flexible programming languages. As with all SCADAPack products the SCADAPack is based on a multiprocessor architecture with a coprocessor used for handling on-board input/output channels.

The Schneider Electric / Control Microsystems SCADAPack Series Programmable Logic Controllers provide Remote Terminal Unit (RTU) functionality with flexible programming options. The programming options include Relay Ladder Logic, IEC 61131-3 and multitasking C languages. The unit can provide a large number of PID controllers for use in feedback control applications. The central processing unit includes a 16-bit CMOS microprocessor with up to 1 MB of CMOS RAM, up to 512K of Flash ROM for use in firmware and application programming. The unit also includes 1kB of EEPROM for storing configuration parameters. With (9) analog inputs, (32) digital I/Os and optional analog outputs, the Schneider Electric / Control Microsystems SCADAPack Series Programmable Logic Controllers provide for a wide variety of process control and metering applications.

The Schneider Electric / Control Microsystems SCADAPack Series Programmable Logic Controllers provide (3) RS-232 or (2) RS232 and (1) RS-485 serial communication ports offering Modbus RTU, Modbus ASCII and DNP3 communication protocols. For those challenging remote applications a fully integrated, license-free spread spectrum wireless module is available at 900 MHz and 2.4 GHz. The SCADAPack Series also supports external radios and modems using Hayes AT commands, and can be programmed using powerful C tools for application specific protocols.

The Schneider Electric / Control Microsystems SCADAPack Series Programmable Logic Controllers offer flexible options for those applications which require a mix of analog and digital I/O coupled with multiple communication ports. With real time communications using industry-standard Modbus protocols, the SCADAPack Series integrates easily with a wide range of SCADA software, MMIs, DCS systems, intelligent instrumentation, and remote I/O control applications.

The Schneider Electric / Control Microsystems SCADAPack Series Programmable Logic Controllers are flexible controllers with use in both master and slave configurations. Special functions include report-by-exception and store and forward capabilities. The unit can be used in applications ranging from large installations with multiple control loops, to remote installations with power conservation requirements. Examples include the control and monitoring of process elements in sewage pumping stations and waste water purification plants. For the Oil and Gas industry this product is ideal for use in gas well optimization, automatic well testing, and tank battery facilities. With the optional on-board Ethernet module and two standard serial ports the SCADAPack Series can also be used in data concentration and network traffic management applications.

For low power applications the SCADAPack Series offers sleep mode functions which keep only counter inputs, interrupt inputs and real time clock alarms active. These features work well in installations using solar power allowing the use of smaller solar panels and batteries.

The SCADAPack Series is fabricated with conformal coatings, gold-plated machined sockets and zinc plated steel system components. Regardless of the specific need, the SCADAPack Series can provide reliable and compact standalone performance in the hazardous environments so often found in SCADA applications.