This Tait T807-10 Switch Mode Power Supply is used and in excellent condition.
• Input Voltage: 120/240 VAC (Internally Selected)
• Output Voltage: 13.8 VDC
• 15 A Continuously Rated Power Supply for 50 W Base Stations
View Photo of the back of this unit
Tait T807/T808 General Information (pdf)
Configuration:
• Input Voltage: 120/240 VAC (Internally Selected)
• Output Voltage: 13.8 VDC
• 15 A Continuously Rated Power Supply for 50 W Base Stations
View Photo of the back of this unit
Tait T807/T808 General Information (pdf)
This Tait T856-20 Transmitter is used and in excellent condition.
• Frequency Band (MHz): 440-480
• Channel Spacing (kHz): 25
• Frequency Stability (ppm): 1 (-20-60 C)
View Photo of the back of this unit
Configuration:
• Frequency Band (MHz): 440-480
• Channel Spacing (kHz): 25
• Frequency Stability (ppm): 1 (-20-60 C)
View Photo of the back of this unit
This Tait T825-10 Receiver is used and in excellent condition.
• Frequency Band (MHz): 66-88
• Channel Spacing (kHz): 25
• Frequency Stability (ppm): 2.5 (-30-60 C)
View Photo of the back of this unit
Configuration:
• Frequency Band (MHz): 66-88
• Channel Spacing (kHz): 25
• Frequency Stability (ppm): 2.5 (-30-60 C)
View Photo of the back of this unit
This Tait T855-20 Receiver is used and in excellent condition.
• Frequency Band (MHz): 440-480
• Channel Spacing (kHz): 25
• Frequency Stability (ppm): 1 (-20-60 C)
View Photo of the back of this unit
Configuration:
• Frequency Band (MHz): 440-480
• Channel Spacing (kHz): 25
• Frequency Stability (ppm): 1 (-20-60 C)
View Photo of the back of this unit
This unit is sealed in manufacturers bag. Cable Included.
This Alcatel-Lucent 552A2 S:6 Power Unit (PWPQAGJAAB) is used and in excellent condition.
This unit is sealed in manufacturers bag. Cable Included.
This Exfo / Gnubi EPX16 chassis w/ EPX000 CPU is used and in excellent condition.
The EPX16 is an affordable, flexible, multi-use telecom test system that is also simple to use. EXFO Gnubi developed the EPX16 with a focus on simultaneous testing of multiple signal rates and protocols (OC-N, STM-N, DS3, DS1, E1, etc.) within a single chassis. The EPX16 can extend the usefulness of your current testers by providing a multi-channel active regenerator with independent error and alarm insertion.
With up to 17 Telecom Test Boards per chassis, the EPX16 has the flexibility to perform many different tasks within one hardware platform. The combination of multiple rates, protocols, and channels within a single chassis makes the EPX16 ideal for Cross-Connect, ADM, WDM, production and load testing. Direct Internet Access capability and a Java 1.1 based Graphical User Interface (GUI) make the EPX16 a powerful tester that is simple to use.
The EPX000 CPU Module performs all necessary communications, status, and monitoring needed by the EPX System and all installed test modules. The CPU features a Web server engine running on a PC based Platform with a hard drive for test data logging and test configuration storage. Remote communications are available through the standard RS-232 or Ethernet interfaces.
The EPX16 is an affordable, flexible, multi-use telecom test system that is also simple to use. EXFO Gnubi developed the EPX16 with a focus on simultaneous testing of multiple signal rates and protocols (OC-N, STM-N, DS3, DS1, E1, etc.) within a single chassis. The EPX16 can extend the usefulness of your current testers by providing a multi-channel active regenerator with independent error and alarm insertion.
With up to 17 Telecom Test Boards per chassis, the EPX16 has the flexibility to perform many different tasks within one hardware platform. The combination of multiple rates, protocols, and channels within a single chassis makes the EPX16 ideal for Cross-Connect, ADM, WDM, production and load testing. Direct Internet Access capability and a Java 1.1 based Graphical User Interface (GUI) make the EPX16 a powerful tester that is simple to use.
The EPX000 CPU Module performs all necessary communications, status, and monitoring needed by the EPX System and all installed test modules. The CPU features a Web server engine running on a PC based Platform with a hard drive for test data logging and test configuration storage. Remote communications are available through the standard RS-232 or Ethernet interfaces.
Configuration:
• Option 11: European Signaling (Encode / Decode)
Product Family: 5895-01-330-4870, 5895013304870
• Option 11: European Signaling (Encode / Decode)
Product Family: 5895-01-330-4870, 5895013304870
This Lucent AWP6 S2-4 CPU2 (T3PQACTAAC) is used and in excellent condition.
This Lucent AWP14 S1-1 SECY Storage Controller (T3PQAGEAAA) is used and in excellent condition.
This Lucent AWR10 S1-2 MTC3 (T3PQZANAAC) is used and in excellent condition.
This Lucent AWR11 S1-1 ClockGN3 (T3PQADKAAA) is used and in excellent condition.
This Lucent ERB5 S1-2 PRI Non-Volatile Memory (T3PQAGCAAB) is used and in excellent condition.
This Tait T826-10 Transmitter is used and in excellent condition.
• Frequency Band (MHz): 66-88
• Channel Spacing (kHz): 25
• Frequency Stability (ppm): 2.5 (-30-60 C)
View Photo of the back of this unit
Configuration:
• Frequency Band (MHz): 66-88
• Channel Spacing (kHz): 25
• Frequency Stability (ppm): 2.5 (-30-60 C)
View Photo of the back of this unit
This Lucent AKM59B S2-4 Controller 2 Unit (T3PQVABAAC) is used and in excellent condition.
This Lucent AKM53 S2-3 Pack Circuit (T3DA2FHGAB) is used and in excellent condition.
This Lucent AKM50 S1-3 DS1 Switch Interface (T3PQWA6AAB) is used and in excellent condition.
This Lucent AWP8 S2-3 EC13 (T3PQAC2AAB) is used and in excellent condition.
This Lucent AWP15 S-1 Digital Phase (T1LIP008AA) is used and in excellent condition.
This JDSU / Acterna / ADA 02-0100-00 DS0 Access / Test Module is used and in excellent condition.
Part Number: 02-0100-0000
Part Number: 02-0100-0000
This Agilent / HP 3551A Transmission Test Set is used and in excellent condition.
Benchtop Chassis
Front Cover Not Included
Input AC Voltage Interface
Internal Batteries Installed
Benchtop Chassis
Front Cover Not Included
Input AC Voltage Interface
Internal Batteries Installed
This Keysight / Agilent 5065-1749-A Cable is used and in excellent condition. It is for option 110 for the Agilent N1690A Datacom Tester.
This Lucent AKM91 S1-2 MUX3 (T3PQAH6AAB) is used and in excellent condition.
This Panasonic VP-8132A Stereo Signal Generator with FM/AM Stereo Modulator is used and in excellent condition.
• FM and AM Stereo (C-QUAM) Modulation
• 0.01 to 280 MHz Range
• 19 dBm Output
Configuration
• FM and AM Stereo (C-QUAM) Modulation
• 0.01 to 280 MHz Range
• 19 dBm Output
This Lucent ERB6 S1-2 SECY Non-Volatile Memory (T3PQAGDAAB) is used and in excellent condition.
This Agilent / HP 83480A Digital Communications Analyzer is used and in excellent condition.
This Tait T807-10-0300 Switch Mode Power Supply is used and in excellent condition.
• Input Voltage (Volts): 120/240V
• Output Voltage (Volts): 13.8
• Full Series 1 Compatible Ex/PA - Front Drive; No Cyclic Keying; Audio Linked; Guides Included
View Photo of the back of this unit
Tait T807/T808 General Information (pdf)
Configuration:
• Input Voltage (Volts): 120/240V
• Output Voltage (Volts): 13.8
• Full Series 1 Compatible Ex/PA - Front Drive; No Cyclic Keying; Audio Linked; Guides Included
View Photo of the back of this unit
Tait T807/T808 General Information (pdf)
This Agilent / HP E7568A Super Processor Card is used and in excellent condition.
This unit has 128MB of on-board memory.
This unit has 128MB of on-board memory.
This Lucent AKM59B S2-3 Controller 2 Unit (T3PQVABAAB) is used and in excellent condition.
This Lucent AKM84 S1-4 SMUX1 (T3PQAEYAAC) is used and in excellent condition.
This Lucent AKM68B S2-6 DS1 Pack Circuit MUX 2 (T3DA3AAGAE) is used and in excellent condition.
This Lucent AKM85 S1-4 SMUXP1 (T3PQAEZAAC) is used and in excellent condition.
This Lucent AKM92 S1-2 MUXP3 (T3PQAH7AAB) is used and in excellent condition.
This Agilent J7231A / J7231B CLK/DS1/PDH Module is used and in excellent condition.
• 2M BNC connector Reference Out
• BNC connectors for PDH In / Out
• SMA connectors for DS1 In / Out
• 2M SMA connector for Bal Reference In
• SMA connectors for Bal/PDH In / Out
• Bantam connectors for Trig RX / TX
Part Number: J7231-60521
Configuration:
• 10M/2M BNC connector Reference In • 2M BNC connector Reference Out
• BNC connectors for PDH In / Out
• SMA connectors for DS1 In / Out
• 2M SMA connector for Bal Reference In
• SMA connectors for Bal/PDH In / Out
• Bantam connectors for Trig RX / TX
Part Number: J7231-60521
This Lucent RDNT CONTR / PWR SYNCR (ED9C047-31 G5) is used and in excellent condition. This unit has several separate boxes that can be set up for card slots. The unit is marked with DPLL, OTB, OTX, PWRG, FBF, FBG, FBH, FBI, PWRF, PWRE2, SEC, PRI, SSC, MTC, CPU, ECI, SCI, UI, ECI and STPNL above the slots.
This Agilent / HP 37778A STM-16/OC-48 Test Set is used and in excellent condition. Communication modules are not included.
This IXIA 1600 Traffic Generator and Analyzer Mainframe is used and in excellent condition. Modules not included.
Part Number: IXIA 1600 / 870-1600-1L
• 16-Slot Chassis
Part Number: IXIA 1600 / 870-1600-1L
Configuration:
• 16-Slot Chassis
This Lucent 556C S3-4 Unit Power (PWPQ975AAB) is used and in excellent condition.
This Lucent BBG6 S1:1 STS1E (SNPQWAEAAA) is used and in excellent condition.
This Agilent / HP E4252A High Speed Card Cage is used and in excellent condition.
Agilent / HP E7565-60001 Module Installed
Agilent / HP E7565-60001 Module Installed
This ADC DSX4H-W10C 18-Slot Unloaded Chassis is used and in excellent condition. This unit ships as photoed.
The DSX4H-W10C is an 18-position unloaded rear cross-connect DSX-3 chassis.
The DSX4H-W10C is an 18-position unloaded rear cross-connect DSX-3 chassis.
This Agilent / HP 3551A Transmission Test Set is used and in excellent condition.
Benchtop Chassis
Front Cover Included
Input AC Voltage Interface
Internal Batteries Need to be Replaced
Benchtop Chassis
Front Cover Included
Input AC Voltage Interface
Internal Batteries Need to be Replaced
Part Numbers: E4400-60549, E4400-63768, E4400-63583, E4400-20583
This Tait T806-20 Power Supply is used and in excellent condition.
• Input Voltage: 230 VAC
• Output Voltage: 13.8 VDC
• 6A continuously Rated power Supply for 25W Base Stations
View Photo of the back of this unit
Configuration:
• Input Voltage: 230 VAC
• Output Voltage: 13.8 VDC
• 6A continuously Rated power Supply for 25W Base Stations
View Photo of the back of this unit
This Lucent DS1 Interface Module (ED9C007-30 G1) is used and in excellent condition. This unit has the number one slot and 17 continued slots on both upper and lower level. The unit is marked with SRV, and SRV/PROTN above the slots. There is also a ESD wrist strap ground connector.
This Lucent DS1P Interface Protection Module (ED9C007-30 G2) is used and in excellent condition. This unit has the number one slot and 17 continued slots on both upper and lower level. The unit is marked with SRV, and SRV/PROTN above the slots. There is also a ESD wrist strap ground connector.
This Lucent STS1 / DS3 Interface (16 STS1 / DS3) Module (ED9C038-30 G2 A) is used and in excellent condition. This unit has the number one slot and 17 continued slots on both upper and lower level. The unit is marked with SRV, and PROTN above the slots. There is also a ESD wrist strap ground connector.
This Lucent Switch Power Shelf (ED2C935-30 G3) is used and in excellent condition. This unit has the number one and two slot and two sets of four continued slots. The unit is marked with PWRA, FBA, FBB, FBC and FBD above the slots.
This Lucent DS3 Interface 32 (32DS3) Module (ED9C038-30 G1) is used and in excellent condition. This unit has the number one slot and 17 continued slots on both upper and lower level. The unit is marked with SRV, and PROTN above the slots. There is also a ESD wrist strap ground connector.
This Agilent / HP 3551A Transmission Test Set is used and in excellent condition.
Rackmount Chassis
Front Cover Not Included
Labeled as Having Option H22 Installed
Input AC Voltage Interface
Battery Option Not Installed
Rackmount Chassis
Front Cover Not Included
Labeled as Having Option H22 Installed
Input AC Voltage Interface
Battery Option Not Installed
This Tait T836-15 Transmitter is used and in excellent condition.
• Frequency Band (MHz): 136-156
• Channel Spacing (kHz): 12.5
• Frequency Stability (ppm): 2.5 (-30-60 C)
View Photo of the back of this unit
Configuration:
• Frequency Band (MHz): 136-156
• Channel Spacing (kHz): 12.5
• Frequency Stability (ppm): 2.5 (-30-60 C)
View Photo of the back of this unit
This Lucent AKM56 S-2 Pack Circuit (T3DA2HFGXX) is used and in excellent condition.
This Lucent AKM48 S-1 DS1 Pack Circuit (T3DA2B1GXX) is used and in excellent condition.
This Lucent AWR12 S1-1 UN Interface (T3PQAC3AAA) is used and in excellent condition.
This Lucent BBF1B S3:7 DS1 (SNCLA7OAAA) is used and in excellent condition.
This Tekelec Neuchatel Time LPFRS-01/10M Profile Frequency Rubidium Standard is used and in excellent condition.
This Lucent BBG8 S1:1 SYSCTL (SNC11W0AA) is used and in excellent condition.
This Lucent BBG9 S1:1 OHCTL (SNC11VLAAA) is used and in excellent condition.
This JDSU / Acterna / ADA 02-0362-00 Ethernet System Controller is used and in excellent condition.
Configuration:
• 3.25GB HDD
Part Number: 02-0362-0000
Configuration:
• 3.25GB HDD
Part Number: 02-0362-0000
This Keysight / Agilent Cable is used and in excellent condition. It is for option 120 for the Agilent N1690A Datacom Tester.
Part Number: 5065-1748-X3
Part Number: 5065-1748-X3
This Tait T801 Frequency Reference Module is used and in excellent condition.
Part Number: T801-00
Part Number: T801-00
This ADC DSX-4H-MBRC 3-Port Module is used and in excellent condition.
The DSX-4H-MBRC is a 3-port rear cross-connect DSX-3 module with midsize jacks. This basic 3-port module includes intrusive IN and OUT switching jacks, and one non-intrusive MONITOR jack that is bridged to the OUT jack. Each module has a red LED. All jacks incorporate "make-before-break" contacts which ensure that signals are not interrupted during patching.
The DSX-4H-MBRC is a 3-port rear cross-connect DSX-3 module with midsize jacks. This basic 3-port module includes intrusive IN and OUT switching jacks, and one non-intrusive MONITOR jack that is bridged to the OUT jack. Each module has a red LED. All jacks incorporate "make-before-break" contacts which ensure that signals are not interrupted during patching.
This Agilent / HP 83480A Digital Communications Analyzer is used and in excellent condition.
• Option 100: Provides Direct Triggering on 12 GHz Signals
Options Installed:
• Option 100: Provides Direct Triggering on 12 GHz Signals
This Agilent / HP 83480A Digital Communications Analyzer is used and in excellent condition.
• Option 54755A: TDR Firmware Kit
Options Installed:
• Option 54755A: TDR Firmware Kit
This Lucent 22F-U S1:1 OLIU Module (SNI22Z0BAA) is used and in excellent condition.
This Lucent AKM47 S-1 DS1 Pack Circuit (T3DA2B1GXX) is used and in excellent condition.
This Lucent AKM70 S1-7 SMUX1 (T3PQWAEAAH) is used and in excellent condition.
This Lucent AWS9 S3-3 DS1 Timing Extractor (T3PQALAAAA) is used and in excellent condition.
This FM/AM-1200S Communications Service Monitor is a parts unit being sold as-is. It will be sold as-is without warranty and will be priced accordingly. If you would like to purchase an individual component of this unit, please contact Artisan Technology Group Sales for pricing and availability.
Configuration:
• Option 11: European Signaling (Encode / Decode)
Configuration:
• Option 11: European Signaling (Encode / Decode)
This Agilent J7230A OmniBER OTN Communications Performance Analyzer is used and in excellent condition. This unit is incomplete and is considered a parts unit. Included modules are listed below. Please see stock-item photo for detailed photo.
• No Processor
• No Modules
Configuration:
• Option 004: Side Insert Modules• No Processor
• No Modules
This Agilent / HP J7230A OmniBER OTN Communications Performance Analyzer is used and in excellent condition. This unit is incomplete and is considered a parts unit. Please see stock-item photo for detailed photo.
• No Processor
• No Modules
Configuration:
• Side Insert Modules• No Processor
• No Modules
This Agilent J7230A OmniBER OTN Rackmount Communications Performance Analyzer is used and in excellent condition. This unit is incomplete and is considered a parts unit. Included modules are listed below. Please see stock-item photo for detailed photo.
• No Processor Module Installed
• No Tx/Rx Modules Installed
Configuration:
• Option 005: Rear Insert Modules• No Processor Module Installed
• No Tx/Rx Modules Installed
This JDSU / Acterna / ADA 02-0105-00 DS1 Interface Module is used and in excellent condition.
Part Number: 02-0105-0000
Part Number: 02-0105-0000
This Lucent 427AB S1-5 DC to DC Power Converter (PWPQAJ2AAB) is used and in excellent condition.
This Exfo / Gnubi EPX100 Clock Source Module is used and in excellent condition.
Connector Interface: Bantam
The EPX100 provides all of the timing sources for EPX test systems. Internal, BITS-timed and external clock sources are available. The external clock output provides a convenient means to trigger a scope or other external test device. The EPX100 also serves as the timing reference for all frequency-counter measurements. Use external clock or external BITS input for the frequency counter. The EPX100 even has a BITS output to allow multiple units to be timed from the same BITS source. In addition, the Clock Module can be run remotely from any Web browser.
Part Numbers: B0033-02 , 0004-01 , A0033-09
Connector Interface: Bantam
The EPX100 provides all of the timing sources for EPX test systems. Internal, BITS-timed and external clock sources are available. The external clock output provides a convenient means to trigger a scope or other external test device. The EPX100 also serves as the timing reference for all frequency-counter measurements. Use external clock or external BITS input for the frequency counter. The EPX100 even has a BITS output to allow multiple units to be timed from the same BITS source. In addition, the Clock Module can be run remotely from any Web browser.
Part Numbers: B0033-02 , 0004-01 , A0033-09
This Tait T855-20-0300 Receiver is used and in excellent condition.
• Frequency Band (MHz): 440-480
• Channel Spacing (kHz): 25
• Frequency Stability (ppm): 1 (-20-60 C)
• Full Series 1 Compatible Ex/PA - Front Drive; No Cyclic Keying; Audio Linked; Guides Included
View Photo of the back of this unit
Configuration:
• Frequency Band (MHz): 440-480
• Channel Spacing (kHz): 25
• Frequency Stability (ppm): 1 (-20-60 C)
• Full Series 1 Compatible Ex/PA - Front Drive; No Cyclic Keying; Audio Linked; Guides Included
View Photo of the back of this unit
This Lucent 428AA S1-5 Output Power (PWPQ941AAE) is used and in excellent condition.
This Lucent AWR2C S1-1 SC13 Pack Circuit (T3DAV00FAA) is used and in excellent condition.
This Lucent AWS8 S-1 Time Base 3 2 Pack (T3PQAHVAAA) is used and in excellent condition.
This Lucent Switch Shelf (ED2C865-30 G1.A.B) is used and in excellent condition. This unit has 32 duel and 32 single slots. The unit is marked with SWIO, CLKGN, and SWCS above the slots. There is many connectors on the rear of unit for wiring to be connected.
This Agilent / HP J2127A 10 Gb/s Portable Transmission Test Set is used and in excellent condition. This unit includes only the power supply, back plane and fan assembly.
This Agilent / HP 8660C Synthesized Signal Generator is used and in good condition.
• Option 001: (±)3x10-9/Day Internal Reference Oscillator
• Option 005: GPIB
• Option 100: HP 11661B Frequency Extension Module Installed
Configuration:
• Option 001: (±)3x10-9/Day Internal Reference Oscillator
• Option 005: GPIB
• Option 100: HP 11661B Frequency Extension Module Installed
This Keysight / Agilent 08920-61035 Opt Reference Module is used and in excellent condition.
This Positron Fiber Systems OSIRIS STD Shelf is used and in excellent condition. This unit comes with ACIU unit and TIU units installed, as well as the LED Interface for critical, major, minor, remote and power LED's.
The ACIU includes front alarm LEDs for critical, major, minor, remote, power, active, fuse A, and fuse B (power source) alarms. The ACIU also provides the interface to the system’s operations, administration, maintenance, and provisioning (OAM&P).
The TIU acts as the main data interface for the shelf, including DS-1, DS-3/EC-1, and external primary and secondary clock connections. It also has an emergency power input connection, which supplies temporary power for maintenance.
STD Model Number: 800101-5
ACIU Model Number: 800360/5
TIU Model Number: 800361/5
The ACIU includes front alarm LEDs for critical, major, minor, remote, power, active, fuse A, and fuse B (power source) alarms. The ACIU also provides the interface to the system’s operations, administration, maintenance, and provisioning (OAM&P).
The TIU acts as the main data interface for the shelf, including DS-1, DS-3/EC-1, and external primary and secondary clock connections. It also has an emergency power input connection, which supplies temporary power for maintenance.
STD Model Number: 800101-5
ACIU Model Number: 800360/5
TIU Model Number: 800361/5
This Tait TA136-02 Alarm Panel is used and in excellent condition.
View Photo of the back of this unit
View Photo of the back of this unit
This JDSU / Acterna / ADA 02-0140-01 DS3 FAD / FAP Interface is used and in excellent condition.
Part Number: 02-0140-0100
Part Number: 02-0140-0100
This JDSU / Acterna / ADA 02-0274-00 High Capacity Access / Test Module is used and in excellent condition.
Part Number: 02-0274-0000
Part Number: 02-0274-0000
This Tait T835-15 Receiver is used and in excellent condition.
• Frequency Band (MHz): 136-156
• Channel Spacing (kHz): 12.5
• Frequency Stability (ppm): 2.5 (-30-60 C)
View Photo of the back of this unit
Tait T835 General Information (pdf)
Tait T835 Installation Instructions (pdf)
Configuration:
• Frequency Band (MHz): 136-156
• Channel Spacing (kHz): 12.5
• Frequency Stability (ppm): 2.5 (-30-60 C)
View Photo of the back of this unit
Tait T835 General Information (pdf)
Tait T835 Installation Instructions (pdf)
This Exfo / Gnubi EPX000 CPU Module is used and in excellent condition.
The EPX000 CPU Module performs all necessary communications, status operations and monitoring needed by EPX systems and all installed test modules. The CPU features a Web server engine running on a PC-based platform with a hard drive for test data logging and test configuration storage. Remote communications are available through the standard RS-232 or Ethernet interfaces.
EPX systems may be controlled from any hardware platform through your favorite Web browser. For your convenience, the EPX000’s hard drive provides all the documentation needed for system configuration. If you are writing your own EPX system control application, you can use the API that is documented on the EPX000’s hard drive.
The EPX000 CPU Module performs all necessary communications, status operations and monitoring needed by EPX systems and all installed test modules. The CPU features a Web server engine running on a PC-based platform with a hard drive for test data logging and test configuration storage. Remote communications are available through the standard RS-232 or Ethernet interfaces.
EPX systems may be controlled from any hardware platform through your favorite Web browser. For your convenience, the EPX000’s hard drive provides all the documentation needed for system configuration. If you are writing your own EPX system control application, you can use the API that is documented on the EPX000’s hard drive.
This Lucent 177B S1:2 APPBLK (SNPQAFHAAB) is used and in excellent condition.
This Lucent AWR6 S3-5 SWI01 Pack Circuit (T3DA2NGFAC) is used and in excellent condition.
This Lucent AWS1B S1-2 Pack Circuit (T3DA2PMHAB) is used and in excellent condition.
This Lucent AWS1B S-1 Pack Circuit (T3DA2PMHXX) is used and in excellent condition.
This Lucent BBG4 S1:3 DS3 (SNCLBBBAAC) is used and in excellent condition.
This Agilent / HP 83480A Digital Communications Analyzer is used and in good condition. There is some cosmetic damage on this unit but none that affect functionality.
This Agilent / HP E4251A Measurement CardCage is used and in excellent condition. This unit has been stored and stacked outside of the manufacturer's packaging for some time and this has resulted in some minor visual defects such as scratches.
Agilent / HP E7565-60001 Module Installed
Agilent / HP E7565-60001 Module Installed
This Positron Fiber Systems 800501 EC-1 Mapper Unit is used and in excellent condition.
This Positron Fiber Systems 800350/2 PSCU-28 DS1/E1 Protection Switch Unit is used and in excellent condition.
Positron Fiber Systems DS-1 Datasheet (pdf)
P/N: 220-800350-402
Positron Fiber Systems DS-1 Datasheet (pdf)
P/N: 220-800350-402
New Arrivals
Communications & Telecom
