HIPOT TESTERS / GROUND TEST / ESD PRODUCTS - Price and Info
- A/D / Digitizers / Oscilloscopes / Recorders / Dataloggers
- Adapters / Extenders / Terminal Blocks
- Amplifiers / Attenuator / Signal Conditioning
- ATE
- Audio Testers
- Battery Testers / Chargers / Analyzers
- Breadboard / Prototyping
- Bus Analyzers / JTAG / Emulator / Exerciser
- Cables / Cabling
- Carriers
- Control Bus Interfaces / SCSI / RS232 / Ethernet / Repeaters
- Controllers / Slot-0 / Status Monitors
- D/A / Function / Signal / Arb Sources
- Data Acquisition / DAQ / Multifunction
- Digital I/O
- DSP / Closed Loop / PID
- Electrical Parts
- Electrical-to-Optical
- Frequency Counters
- IC Testers / Programmers
- Imaging / Vision / Graphics Processors / Framegrabbers
- Integrated Circuits
- LCR / Impedance Meters
- Logic Analyzers
- Mainframes / Chassis
- Memory / RAM / Disk / Flash / Storage / Repeater
- Multimeters / Electrometers / Ammeters
- Noise Generators / Analyzers
- Oscillator / Clock / Timing / Time Code
- Other Electrical
- Power Meters
- Power Supplies / AC Sources / Load Modules
- Probes / Test Fixtures
- Pulse / Pattern Generators
- RF / Spectrum Analyzers / Microwave / IF
- Source Measure Units (SMU) / Calibration
- Switches / Relay / MUX / DEMUX
- Tachometer / Encoder / Synchro / Resolvers / Decoders
- Time Interval Analyzers / Delay Generators
- Transfer Switch / Fuse / Breaker
- Transition Modules
- TV and Video Test
- Vector Signal Analyzers
This Rod-L Model M100DC DC Hipot Test Instrument is used, in excellent operational, and good physical condition.
Max Current Output: 5 mA
Labeled Model Number:
M100DC-5.5-5Max Current Output: 5 mA
This Rod-L Model M25 Ground Continuity Test Instrument is used and in excellent operational condition. There is a fair amount of wear on the case of the instrument, typical of a unit used in a production facility. It comes with a S002-05 Eclipse Magnetic Chassis Ground Probe (not shown in photo).
Output Current: 25 A
Output Current: 25 A
This Associated Research High Current Return Interconnect Cable is new from surplus stock.
Cable Length: 3 ft
Cable Length: 3 ft
Probes are not included. Please contact manufacturer for pricing and availability.
This Rod-L M30 Ground Continuity Test Instrument is used and in excellent condition. There is a fair amount of wear on the case of the instrument, typical of a unit used in a production facility. It comes with a S002-05 Eclipse Magnetic Chassis Ground Probe (not shown in photo).
Input Voltage: 115/230 VAC
Output Current: 30 A
Input Voltage: 115/230 VAC
Output Current: 30 A
There are some minor cosmetic blemishes due to warehouse storage. These blemishes do not affect operation. This unit ships with standard documentation in manufacturer's box.
• 2.8kV AC Max Voltage
• 40 mA Leakage
• ÷ 10 Front Panel Switch Current Trip Point (Standard on BVS5 Models)
This model has also been known to be labeled M100BVS5-28-40.
M100BVS5-2.8-40
• Adjustable Trip Point• 2.8kV AC Max Voltage
• 40 mA Leakage
• ÷ 10 Front Panel Switch Current Trip Point (Standard on BVS5 Models)
This model has also been known to be labeled M100BVS5-28-40.
These Associated Research High Voltage Interconnect Cables are new from surplus stock. The High Voltage Interconnect Cables connect the test terminals of the HS-01 to the CH ports on the QUADCHECK II.
Set of 8 Cables
Cable Length: 18 in
Set of 8 Cables
Cable Length: 18 in
M100BVS5-5.0-25
• Adjustable Trip Point• 5kV AC Max Voltage
• 25 mA Leakage
• ÷ 10 Front Panel Switch Current Trip Point (Standard on BVS5 Models)
This model has also been known to be labeled M100BVS5-50-25.
This Associated Research High Current Output Interconnect Cable is new from surplus stock.
Cable Length: 3 ft
Cable Length: 3 ft
This Vishay Measurements 1300 Gage Installation Tester is used and in excellent condition. Battery is used.
Configuration:
• Voltage DC Accuracy: ±(0.09%+2)
• Voltage AC Accuracy: ±(2%+3) / 5kHz
• Current DC Amps Accuracy: ±(0.2%+2)
• Current AC Amps Accuracy: ±(1.5%+2)
• Resistance Accuracy: ±(0.9%+2)
Accessories Included:
• Transcat C-101 Hard Case
• Transcat C-101 Soft Case
• AC285 SureGripTM Alligator Clip Set
• 80AK-A Thermocouple Adapter
• TPAK ToolPakTM Magnetic Meter Hanger
• Velcro Meter Hanger
• CAT III 1000V 10A Test Lead
View Photo of included accessories.
• Voltage DC Accuracy: ±(0.09%+2)
• Voltage AC Accuracy: ±(2%+3) / 5kHz
• Current DC Amps Accuracy: ±(0.2%+2)
• Current AC Amps Accuracy: ±(1.5%+2)
• Resistance Accuracy: ±(0.9%+2)
Accessories Included:
• Transcat C-101 Hard Case
• Transcat C-101 Soft Case
• AC285 SureGripTM Alligator Clip Set
• 80AK-A Thermocouple Adapter
• TPAK ToolPakTM Magnetic Meter Hanger
• Velcro Meter Hanger
• CAT III 1000V 10A Test Lead
View Photo of included accessories.
The model M100AVS5 has been replaced with the newer model M100BVS5.
• 2.8kV AC Max Voltage
• 40 mA Leakage
This model has also been known to be labeled M100AVS5-28-40.
M100AVS5-2.8-40
• Adjustable Trip Point• 2.8kV AC Max Voltage
• 40 mA Leakage
This model has also been known to be labeled M100AVS5-28-40.
M100BVS5-2.8-40
• Adjustable Trip Point• 2.8kV AC Max Voltage
• 40 mA Leakage
• ÷ 10 Front Panel Switch Current Trip Point (Standard on BVS5 Models)
Installed Options:
• Option 01: Remote Control (Digital)
• Option 06: Rear Panel Lockout Cover
This model has also been known to be labeled M100BVS5-28-40.
The unit is missing one of the two front handles but this does not affect the operation of the unit. The model M100AVS5 has been replaced with the newer model M100BVS5.
• 5kV AC Max Voltage
• 25 mA Leakage
This model has also been known to be labeled M100AVS5-50-25.
M100AVS5-5.0-25
• Adjustable Trip Point• 5kV AC Max Voltage
• 25 mA Leakage
This model has also been known to be labeled M100AVS5-50-25.
Configuration:
• 0-6 kV, 100 kHz ring wave, at both 200A and 500A
• Bi-Wave 1.2 x 50 us peak Open Circuit voltage, 0-6 kV
• Bi-Wave 8 x 20 us peak Short Circuit Current. to - 3kA.
• 0-6 kV, 100 kHz ring wave, at both 200A and 500A
• Bi-Wave 1.2 x 50 us peak Open Circuit voltage, 0-6 kV
• Bi-Wave 8 x 20 us peak Short Circuit Current. to - 3kA.
M100BVS5-1.5-50
• Adjustable Trip Point
• 1.5kV AC Max Voltage
• 50 mA Leakage
• ÷ 10 Front Panel Switch Current Trip Point (Standard on BVS5 Models)
This model has also been known to be labeled M100BVS5-15-50.
• Adjustable Trip Point
• 1.5kV AC Max Voltage
• 50 mA Leakage
• ÷ 10 Front Panel Switch Current Trip Point (Standard on BVS5 Models)
This model has also been known to be labeled M100BVS5-15-50.
This CableTest Systems E128HV Expansion Box is used and in excellent condition.
Input Voltage: 24VDC
Part Number: FP6251RC
Part Number: FP6251RC
This Cirris Systems Signature 1100H+ Cable Analyzer is used and in excellent condition
Components and Features:
• Microprocessor Assembly Module
• Scanner Assembly Module
• EZT/1100 High Voltage Module
• Capacity: 128 to 1024 points
• Test Levels: 0 - 1500 VDC
• Max Points Per Net: 100
View Photo of Microprocessor Assembly Module.
View Photo of Scanner Assembly Module.
View Photo of EZT/1100 High Voltage Module.
Components and Features:
• Microprocessor Assembly Module
• Scanner Assembly Module
• EZT/1100 High Voltage Module
• Capacity: 128 to 1024 points
• Test Levels: 0 - 1500 VDC
• Max Points Per Net: 100
View Photo of Microprocessor Assembly Module.
View Photo of Scanner Assembly Module.
View Photo of EZT/1100 High Voltage Module.
This IET / General Radio 1689M Precision Digibridge RLC Tester is used and in excellent condition.
Installed Options:
• IEEE-488 Bus Handler Interface, 1658-9620
Part Number: 1689-9750, 1689-9750-01, 1689-6500
Installed Options:
• IEEE-488 Bus Handler Interface, 1658-9620
Part Number: 1689-9750, 1689-9750-01, 1689-6500
Input Voltage: 24VDC
Input Voltage connector a little loose. It does not affect functionality.
Part Number: FP6251RC
Input Voltage connector a little loose. It does not affect functionality.
Part Number: FP6251RC
Modules for this system are sold separately.
Accessories such as manuals or software are not included. Please contact manufacturer for pricing and availability.
Configuration:
• Module Bays: 2 Full-Width or 4 Half-Width
• Floor Stand
• Option Keytek FC-11 FiberCom External Unit
If you would like to purchase one or more components of this controller, please contact Artisan Sales for pricing and availability.
Accessories such as manuals or software are not included. Please contact manufacturer for pricing and availability.
Configuration:
• Module Bays: 2 Full-Width or 4 Half-Width
• Floor Stand
• Option Keytek FC-11 FiberCom External Unit
If you would like to purchase one or more components of this controller, please contact Artisan Sales for pricing and availability.
This unit has the rack mounts (see photo). Remote interface installed. The model M100AVS5 has been replaced with the newer model M100BVS5.
• 2.8kV AC Max Voltage
• 40 mA Leakage
This model has also been known to be labeled M100AVS5-28-40.
M100AVS5-2.8-40
• Adjustable Trip Point• 2.8kV AC Max Voltage
• 40 mA Leakage
This model has also been known to be labeled M100AVS5-28-40.
Accessories:
• PW 300 Power Supply
• (2) 6ft, 64 Pin to 64 Pin Cables
• (2) AHED-64 Adapter Cards
• (2) AHED-SD Adapter Cards
View Photo of Accessories
• PW 300 Power Supply
• (2) 6ft, 64 Pin to 64 Pin Cables
• (2) AHED-64 Adapter Cards
• (2) AHED-SD Adapter Cards
View Photo of Accessories
Configurations:
• Input Voltage: 0-100kVdc
• Input Impedance: 1000Mohms
• Output Impedance: 1M; 100kohms
• Output Taps: 100V, 10V
• Stability: 0.01%/8hrs
• Input Voltage: 0-100kVdc
• Input Impedance: 1000Mohms
• Output Impedance: 1M; 100kohms
• Output Taps: 100V, 10V
• Stability: 0.01%/8hrs
This Haefely Technology PESD 3000 Electrostatic Discharge Tester is used and in excellent condition.
Configuration
• Powered by Desktop Unit
• Discharge Voltage: up to 30 kV
• Output Air Discharge: 1000V to 30 kV
• Supplied With Three Discharge Circuits
• Output Contact Discharge: 1000 V to 25 kV
Configuration
• Powered by Desktop Unit
• Discharge Voltage: up to 30 kV
• Output Air Discharge: 1000V to 30 kV
• Supplied With Three Discharge Circuits
• Output Contact Discharge: 1000 V to 25 kV
S3HV Module Configuration:
• Bi-Wave 1.2 x 50 us Peak Open Circuit Voltage, 0-10 kV
• Bi-Wave 8 x 20 us Peak Short Circuit Current, 0-5 kA
• Bi-Wave 1.2 x 50 us Peak Open Circuit Voltage, 0-10 kV
• Bi-Wave 8 x 20 us Peak Short Circuit Current, 0-5 kA
View Photo of Module Interior.
This Thermo / Keytek ECAT Expert Computer-Aided Testing System is used and in excellent condition. Accessories such as manuals or software are not included.
• E103 Controller Installed (Windows Application Software not Included)
• E501A Combination Wave Surge Simulator Module Installed
• E503 100 kHz Ringwave Surge Simulator Module Installed
• E4551 Combined Surge and EFT Coupler/Decoupler Module Installed
Configuration:
• E103 Controller Installed (Windows Application Software not Included)
• E501A Combination Wave Surge Simulator Module Installed
• E503 100 kHz Ringwave Surge Simulator Module Installed
• E4551 Combined Surge and EFT Coupler/Decoupler Module Installed
This Cirris Systems Signature 1100H+ Cable Analyzer (1000 V Unit) is used and in good condition. This unit is missing one or more twistlock fasteners and one or more plastic adapter cover plates.
Components and Features:
• Microprocessor Assembly Module
• Scanner Assembly Module
• T1/1100 High Voltage Module
• Capacity: 128 to 1024 points
• Test Levels: 0 - 1000 VDC
• Max Points Per Net: 100
View Photo of Microprocessor Assembly Module.
View Photo of Scanner Assembly Module.
View Photo of T1/1100 High Voltage Module.
View Photo of Missing Twistlock Fastener.
View Photo of Missing Plastic Adapter Cover Plates.
Components and Features:
• Microprocessor Assembly Module
• Scanner Assembly Module
• T1/1100 High Voltage Module
• Capacity: 128 to 1024 points
• Test Levels: 0 - 1000 VDC
• Max Points Per Net: 100
View Photo of Microprocessor Assembly Module.
View Photo of Scanner Assembly Module.
View Photo of T1/1100 High Voltage Module.
View Photo of Missing Twistlock Fastener.
View Photo of Missing Plastic Adapter Cover Plates.
Configuration:
• Module Bays: 2 Full-Width or 4 Half-Width
• Modules are sold separately. Please contact Artisan Sales for pricing and availability.
• PK1001D Differential High Voltage Probe with Interlock Unit
• FC-11 Fiber Optic to RS-232 Converter
• ECAT Software Suite: 90-901-305-00 (2 Disks)
• Manuals Included.
View Photo of accessories.
• Module Bays: 2 Full-Width or 4 Half-Width
• Modules are sold separately. Please contact Artisan Sales for pricing and availability.
• PK1001D Differential High Voltage Probe with Interlock Unit
• FC-11 Fiber Optic to RS-232 Converter
• ECAT Software Suite: 90-901-305-00 (2 Disks)
• Manuals Included.
View Photo of accessories.
M100BVS5-2.8-40
• Adjustable Trip Point
• 2.8kV AC Max Voltage
• 40 mA Leakage
• ÷ 10 Front Panel Switch Current Trip Point (Standard on BVS5 Models)
• Adjustable Trip Point
• 2.8kV AC Max Voltage
• 40 mA Leakage
• ÷ 10 Front Panel Switch Current Trip Point (Standard on BVS5 Models)
This Educated Design and Development GC-1000 Automatic Ground Impedance Tester is used and in excellent condition.
The model M100AVS5 has been replaced with the newer model M100BVS5.
• 5kV AC Max Voltage
• 25 mA Leakage
This model has also been known to be labeled M100AVS5-50-25.
M100AVS5-5.0-25
• Adjustable Trip Point• 5kV AC Max Voltage
• 25 mA Leakage
This model has also been known to be labeled M100AVS5-50-25.
The model M100AVS5 has been replaced with the newer model M100BVS5. The plastic cap for the six-position selector is not included. This does not affect the operation.
Rackmount Chassis
Remote Interface Installed
• 2.8kV AC Max Voltage
• 25 mA Leakage
This model has also been known to be labeled M100AVS5-28-25.
View Photo of the back of this unit.
Rackmount Chassis
Remote Interface Installed
M100AVS5-2.8-25
• Adjustable Trip Point• 2.8kV AC Max Voltage
• 25 mA Leakage
This model has also been known to be labeled M100AVS5-28-25.
View Photo of the back of this unit.
Modules for this system are sold separately.
Accessories such as manuals or software are not included. Please contact manufacturer for pricing and availability.
Configuration:
• Module Bays: 2 Full-Width or 4 Half-Width
• Option TR-EIXX
• Option Surge Synch BNC Connector
Accessories such as manuals or software are not included. Please contact manufacturer for pricing and availability.
Configuration:
• Module Bays: 2 Full-Width or 4 Half-Width
• Option TR-EIXX
• Option Surge Synch BNC Connector
Configuration:
• Adjustable Trip Point
• 2.8kV AC Max Voltage
• 40 mA Leakage
• A25 Hands Off / Switch Selectable Failure Points
This model has also been known to be labeled M100AVS4-28-40.
• Adjustable Trip Point
• 2.8kV AC Max Voltage
• 40 mA Leakage
• A25 Hands Off / Switch Selectable Failure Points
This model has also been known to be labeled M100AVS4-28-40.
This Associated Research 5500DT HypotPlus II AC Withstand Voltage Tester is used and in excellent condition.
This Rod-L Model M100DC DC Hipot Test Instrument is used, in excellent operational, and good physical condition.
Max Current Output: 10 mA
AC Hipot Tester Interface Option Installed
Labeled Model Number:
M100DC-5.5-1.0Max Current Output: 10 mA
AC Hipot Tester Interface Option Installed
Modules for this system are sold separately.
Accessories such as manuals or software are not included. Please contact manufacturer for pricing and availability.
Configuration:
• Module Bays: 2 Full-Width or 4 Half-Width
• FC-11 Fiber Optic to RS-232 Converter
• Floor Stand
If you would like to purchase one or more components of this controller, please contact Artisan Sales for pricing and availability.
View Photo of FC-11 Fiber Optic to RS-232 Converter
Accessories such as manuals or software are not included. Please contact manufacturer for pricing and availability.
Configuration:
• Module Bays: 2 Full-Width or 4 Half-Width
• FC-11 Fiber Optic to RS-232 Converter
• Floor Stand
If you would like to purchase one or more components of this controller, please contact Artisan Sales for pricing and availability.
View Photo of FC-11 Fiber Optic to RS-232 Converter
This Rod-L Model M100DC DC Hipot Test Instrument is used, in excellent operational, and good physical condition.
Max Current Output: 1 mA
Labeled Model Number:
M100DC-5.5-100Max Current Output: 1 mA
This Rod-L M500AVS5 AC Hipot Test Instrument is used, in excellent operational, and fair physical condition.
• 5kV AC Max Voltage
• 100 mA Leakage
This model has also been known to be labeled M500AVS5-50-100.
M500AVS5-5.0-100
• Adjustable Trip Point• 5kV AC Max Voltage
• 100 mA Leakage
This model has also been known to be labeled M500AVS5-50-100.
The Rod-L M300RT Insulation Resistance Test Instrument is used and in excellent condition.
This Rod-L Model M100DC DC Hipot Test Instrument is used, in excellent operational, and good physical condition.
Max Current Output: 10 mA
Labeled Model Number:
M100DC-5.5-100Max Current Output: 10 mA
This Thermo / Keytek ECAT Expert Computer-Aided Testing System is used and in excellent condition. This unit includes manuals.
Configuration:
• E103 Controller Installed
• E501A Combination Wave Surge Simulator Module Installed
• E551 Surge Coupler / Decoupler Module Installed
• E504 Surge Network Combination Waves Module Installed
Included:
• PK1001D Differential High Voltage Probe with Interlock Unit
• FC-11 Fiber Optic to RS-232 Converter
• ECAT Software Suite: 90-901-305-00 (2 Disks)
Configuration:
• E103 Controller Installed
• E501A Combination Wave Surge Simulator Module Installed
• E551 Surge Coupler / Decoupler Module Installed
• E504 Surge Network Combination Waves Module Installed
Included:
• PK1001D Differential High Voltage Probe with Interlock Unit
• FC-11 Fiber Optic to RS-232 Converter
• ECAT Software Suite: 90-901-305-00 (2 Disks)
The model M100AVS5 has been replaced with the newer model M100BVS5.
• 1.5kV AC Max Voltage
• 50 mA Leakage
This model has also been known to be labeled M100AVS5-15-50.
M100AVS5-1.5-50
• Adjustable Trip Point• 1.5kV AC Max Voltage
• 50 mA Leakage
This model has also been known to be labeled M100AVS5-15-50.
This Rod-L Model M100DC DC Hipot Test Instrument is used, in excellent operational, and good physical condition.
Max Current Output: 10 mA
Remote Control Option Installed
Labeled Model Number:
M100DC-5.5-100Max Current Output: 10 mA
Remote Control Option Installed
This Rod-L Model M100DC DC Hipot Test Instrument is used in good condition.
Max Current Output: 500 µA
Max DC Voltage Out: 6kV
Remote Control Option Installed
Rackmount Handles Installed
Labeled Model Number:
M100DC-5.5-500Max Current Output: 500 µA
Max DC Voltage Out: 6kV
Remote Control Option Installed
Rackmount Handles Installed
This Rod-L Model M100DC DC Hipot Test Instrument is used, in excellent operational, and good physical condition. This unit has an auto-switching power supply. This unit does not include the burn/test switch or the side handles.
Max Current Output: 5 mA
Labeled Model Number:
M100DC-5.5-5Max Current Output: 5 mA
This CableTest Systems H1500P-128/HV-EXP Expansion Box is used and in excellent condition.
Configuration:
• Option: HV - High Voltage Only, Cannot be Used with High Current
Configuration:
• Option: HV - High Voltage Only, Cannot be Used with High Current
This Rod-L M25 Ground Continuity Test Instrument is used and in excellent operational condition and fair physical condition. There is a fair amount of wear on the case of the instrument, typical of a unit used in a production facility.
Output Current: 25 A
Output Current: 25 A
Configuration:
• 247000 Digital Low Resistance Ohmmeter
• 15572-1 0.25-Amp Power Supply
• 247000 Digital Low Resistance Ohmmeter
• 15572-1 0.25-Amp Power Supply
This Rod-L Model M25 Ground Continuity Test Instrument is used and in excellent operational condition. There is a fair amount of wear on the case of the instrument, typical of a unit used in a production facility.
Output Current: 25 A
Output Current: 25 A
The M100A is the predecessor to the Rod-L M100AVS.
• Adjustable Trip Point
• 1.5kV AC Max Voltage
• 10 mA Leakage
This model has also been known to be labeled M100A2-15-10.
M100A2-1.5-10
• Adjustable Trip Point
• 1.5kV AC Max Voltage
• 10 mA Leakage
This model has also been known to be labeled M100A2-15-10.
M100AVS4-2.8-25
• Adjustable Trip Point• 2.8kV AC Max Voltage
• 25 mA Leakage
This model has also been known to be labeled M100AVS4-28-25.
The model M100AVS5 has been replaced with the newer model M100BVS5.
• 1.5kV AC Max Voltage
• 40 mA Leakage
This model has also been known to be labeled M100AVS5-15-40.
M100AVS5-1.5-40
• Adjustable Trip Point• 1.5kV AC Max Voltage
• 40 mA Leakage
This model has also been known to be labeled M100AVS5-15-40.
This Thermo / Keytek E4551KV Combined Surge and EFT Coupler/Decoupler Module has a cracked front panel door; however, this will not prevent it from functioning properly.
Configuration:
• Phase: Single-Phase
• Voltage: 250V rms
• Current Per Phase: 15/16A
• Option E455116V-VI: Enhanced V and I Monitoring
View Photo of Cracked Front Panel Door
View Photo of Left Interior Panel
View Photo of Right Interior Panel
Configuration:
• Phase: Single-Phase
• Voltage: 250V rms
• Current Per Phase: 15/16A
• Option E455116V-VI: Enhanced V and I Monitoring
View Photo of Cracked Front Panel Door
View Photo of Left Interior Panel
View Photo of Right Interior Panel
This Associated Research HS-01 Receptacle Adapter Box is new from surplus stock.
Maximum High Voltage Rating: 5kVAC and 6kVDC
HS-01 Dimensions (H x W x D): 5 x 17 x 13 inches
Maximum High Voltage Rating: 5kVAC and 6kVDC
HS-01 Dimensions (H x W x D): 5 x 17 x 13 inches
M500BVS5-5.0-100
• Adjustable Trip Point
• 5kV AC Max Voltage
• 100 mA Leakage
• ÷ 10 Front Panel Switch Current Trip Point (Standard on BVS5 Models)
This model has also been known to be labeled M100BVS5-50-100.
• Adjustable Trip Point
• 5kV AC Max Voltage
• 100 mA Leakage
• ÷ 10 Front Panel Switch Current Trip Point (Standard on BVS5 Models)
This model has also been known to be labeled M100BVS5-50-100.
This Cirris Sytems Signature 1000H Cable Analyzer is used and in good condition. This unit is missing one or more twistlock fasteners and one or more plastic adapter cover plates. Battery is used and may need to be replaced.
Components and Features:
• Microprocessor Assembly Module
• Scanner Assembly Module
• Capacity: 128 to 256 points
• Test Levels: OFF, 50, 100, 200, 300, 400, 500, and 630 VDC
• Sensitivity: .5 ,1, 2, 5, 10, 20, 50, 100, 200, 500, 1000 Ohms
• Max Points Per Net: 50
View Photo of Microprocessor Assembly Module.
View Photo of Scanner Assembly Module.
View Photo of Missing Twistlock Fastener.
View Photo of Missing Plastic Adapter Cover Plates.
Components and Features:
• Microprocessor Assembly Module
• Scanner Assembly Module
• Capacity: 128 to 256 points
• Test Levels: OFF, 50, 100, 200, 300, 400, 500, and 630 VDC
• Sensitivity: .5 ,1, 2, 5, 10, 20, 50, 100, 200, 500, 1000 Ohms
• Max Points Per Net: 50
View Photo of Microprocessor Assembly Module.
View Photo of Scanner Assembly Module.
View Photo of Missing Twistlock Fastener.
View Photo of Missing Plastic Adapter Cover Plates.
AC Adaptor not included.
AC Adaptor not included.
Configuration:
• Ranges: 200, 2k, 20k Ω
Configuration:
• Ranges: 200, 2k, 20k Ω
AC Adaptor not included.
Configuration:
• Ranges: 20, 200, 2k, 20k Ω
Configuration:
• Ranges: 20, 200, 2k, 20k Ω
This Cirris Sytems Signature 1000H+ Cable Analyzer is used and in good condition. This unit is missing one or more twistlock fasteners and one or more plastic adapter cover plates. Battery is used and may need to be replaced.
Components and Features:
• Microprocessor Assembly Module
• Scanner Assembly Module
• Memory and Battery Backup Module
• Capacity: 128 to 512 points
• Test Levels: OFF, 50, 100, 200, 300, 400, 500, 630, 800 and 1000 VDC
• Sensitivity: .1 to 100 kOhm, 500kOhm, 1MOhm, 5MOhm
• Max Points Per Net: 100
View Photo of Microprocessor Assembly Module.
View Photo of Scanner Assembly Module.
View Photo of Memory and Battery Backup Module.
View Photo of Missing Twistlock Fastener.
View Photo of Missing Plastic Adapter Cover Plates.
Components and Features:
• Microprocessor Assembly Module
• Scanner Assembly Module
• Memory and Battery Backup Module
• Capacity: 128 to 512 points
• Test Levels: OFF, 50, 100, 200, 300, 400, 500, 630, 800 and 1000 VDC
• Sensitivity: .1 to 100 kOhm, 500kOhm, 1MOhm, 5MOhm
• Max Points Per Net: 100
View Photo of Microprocessor Assembly Module.
View Photo of Scanner Assembly Module.
View Photo of Memory and Battery Backup Module.
View Photo of Missing Twistlock Fastener.
View Photo of Missing Plastic Adapter Cover Plates.
This Cirris Sytems Signature 1000H Cable Analyzer is used and in fair condition. This unit is missing one or more twistlock fasteners, one or more plastic adapter cover plates, and a switch. Battery is used and may need to be replaced.
Components and Features:
• Microprocessor Assembly Module
• Scanner Assembly Module
• Memory and Battery Backup Module
• Capacity: 128 to 256 points
• Test Levels: OFF, 50, 100, 200, 300, 400, 500, and 630 VDC
• Sensitivity: .5 ,1, 2, 5, 10, 20, 50, 100, 200, 500, 1000 Ohms
• Max Points Per Net: 50
View Photo of Microprocessor Assembly Module.
View Photo of Scanner Assembly Module.
View Photo of Memory and Battery Backup Module.
View Photo of Missing Twistlock Fastener.
View Photo of Missing Plastic Adapter Cover Plates.
View Photo of Missing Switch.
Components and Features:
• Microprocessor Assembly Module
• Scanner Assembly Module
• Memory and Battery Backup Module
• Capacity: 128 to 256 points
• Test Levels: OFF, 50, 100, 200, 300, 400, 500, and 630 VDC
• Sensitivity: .5 ,1, 2, 5, 10, 20, 50, 100, 200, 500, 1000 Ohms
• Max Points Per Net: 50
View Photo of Microprocessor Assembly Module.
View Photo of Scanner Assembly Module.
View Photo of Memory and Battery Backup Module.
View Photo of Missing Twistlock Fastener.
View Photo of Missing Plastic Adapter Cover Plates.
View Photo of Missing Switch.
Included Accessories:
• Storage Case
• Positive and Negative Probes
View Photo of included accessories.
• Storage Case
• Positive and Negative Probes
View Photo of included accessories.
This CableTest Systems E128HCH Expansion Box is used and in excellent condition.
This CableTest Systems H1500-128HV-EXP Expansion Box is used and in excellent condition.
Part Number: C00012996
Signal Switching Relay Module Part Number: 17-18549-04D
Connector Part Number: AW17-18530-01
Signal Switching Relay Module Part Number: 17-18549-04D
Connector Part Number: AW17-18530-01
Configuration:
• Test Voltages: 50 V to 1 kV in 10 V Steps, 1 kV to 10 kV in 25 V Steps
• Accuracy (23°C, 10 kV): ±5%: 1MΩ to 2TΩ
±20% to 20TΩ
• Interference Rejection: 1 mA Per 600 V Up to a Maximum of 2 mA
• Test Voltages: 50 V to 1 kV in 10 V Steps, 1 kV to 10 kV in 25 V Steps
• Accuracy (23°C, 10 kV): ±5%: 1MΩ to 2TΩ
±20% to 20TΩ
• Interference Rejection: 1 mA Per 600 V Up to a Maximum of 2 mA
AC Adaptor and handle are not included.
Configuration:
• Ranges: 20, 200, 2k, 20k Ω
Configuration:
• Ranges: 20, 200, 2k, 20k Ω
AC Adaptor not included.
Configuration:
• Ranges: 20, 200, 2k, 20k Ω
Configuration:
• Ranges: 20, 200, 2k, 20k Ω
This unit is missing the large turn knob on back panel; however, this will not prevent it from functioning properly. See photo here.
• 2.8kV AC Max Voltage
• 40 mA Leakage
• A25 Hands Off / Switch Selectable Failure Points
This model has also been known to be labeled M100AVS4-28-40.
M100AVS4-2.8-40
• Adjustable Trip Point• 2.8kV AC Max Voltage
• 40 mA Leakage
• A25 Hands Off / Switch Selectable Failure Points
This model has also been known to be labeled M100AVS4-28-40.
This unit includes alligator clamps.
Configuration:
• Range: 50 V, 100 V, 250 V, 500 V and 1000 V + PI, DAR
Configuration:
• Range: 50 V, 100 V, 250 V, 500 V and 1000 V + PI, DAR
This Pinion Products Stat Analyst Statistical ESD Protection Analyzer is used and in excellent condition. This unit ships with accessories.
Software Version: 1.0
Accessories:
• FC-100SA: Faraday Cup
• Charge Plate Monitor
• Probes
• Sensor Cables
• Carrying Case
Software Version: 1.0
Accessories:
• FC-100SA: Faraday Cup
• Charge Plate Monitor
• Probes
• Sensor Cables
• Carrying Case
Configuration:
• (1) 10 Ft (3 m) Positive Test Lead
• (1) 10 Ft (3 m) Negative Test Lead
View Photo of the Test Leads.
• (1) 10 Ft (3 m) Positive Test Lead
• (1) 10 Ft (3 m) Negative Test Lead
View Photo of the Test Leads.
This Rod-L M10 Ground Continuity Test Instrument is used and in excellent condition. There is a fair amount of wear on the case of the instrument, typical of a unit used in a production facility. It comes with a S002-05 Eclipse Magnetic Chassis Ground Probe (not shown in photo).
Output Current: 10 A
View Photo of the back of this unit
Output Current: 10 A
View Photo of the back of this unit
This Rod-L M10 Ground Continuity Test Instrument is used and in excellent condition. This unit is labeled as a 10 AMP Ground Tester. This unit does not have the HV Out, Current In, or Ground Connections on the rear panel. There is a fair amount of wear on the case of the instrument, typical of a unit used in a production facility. It comes with a S002-05 Eclipse Magnetic Chassis Ground Probe (not shown in photo).
Output Current: 10 A
View Photo of the back of this unit
Output Current: 10 A
View Photo of the back of this unit
This Rod-L Model M100DC DC Hipot Test Instrument is used, in fair operational, good physical condition and is being sold as-is. This unit if functional, however it requires a manufacturers adjustment/calibration. The unit has been priced accordingly.
Max Current Output: 5 mA
Labeled Model Number:
M100DC-5.5-5Max Current Output: 5 mA
This CableTest Systems H1500P-128/EXP Expansion Box is used and in good condition. This unit is missing one or more knobs.
View Photo of Missing Knob(s).
View Photo of Missing Knob(s).
AC Adaptor not included.
This unit is missing the handle cap; however, this will not prevent it from functioning properly.
View a Representative Photo of the missing handle cap.
This unit is missing the handle cap; however, this will not prevent it from functioning properly.
View a Representative Photo of the missing handle cap.
This item comes with the optional tough carry case.
Configuration:
• Range: 1000 V, 500 V, and 250 V (DC)
View Photo of the Tough Carry Case.
Configuration:
• Range: 1000 V, 500 V, and 250 V (DC)
View Photo of the Tough Carry Case.
Configuration:
• (22) Normally Open GIGAVAC Model GX11 High Power Relays
• (1) 24V/6.2A Power Supply
• (6) Circular 19-Pin Military-Style Rear Panel Connectors
Operating Voltage: 100-130/200-260 VAC
• (22) Normally Open GIGAVAC Model GX11 High Power Relays
• (1) 24V/6.2A Power Supply
• (6) Circular 19-Pin Military-Style Rear Panel Connectors
Operating Voltage: 100-130/200-260 VAC
Configuration:
• (8) Form A (SPST) Relays
• HXV/4x2 Matrix Configuration
• Built-In Screw Terminal Connectors
• (8) Form A (SPST) Relays
• HXV/4x2 Matrix Configuration
• Built-In Screw Terminal Connectors
Configuration:
• Test Points: 256, Expandable to 5,376
• Input Voltage: 105-135 VAC
View Photo of the Rear Panel.
• Test Points: 256, Expandable to 5,376
• Input Voltage: 105-135 VAC
View Photo of the Rear Panel.
This CableTest Systems E64HCH Expansion Box is used and in excellent condition.
This CableTest Systems E64HV Expansion Box is used and in excellent condition.
New Arrivals
Electrical Test
