Items/Page
Showing 1-100 of 5303 Results
The smart card is addressed over the VXIbus, and all other modules resident in the VXIbus chassis are controlled by this card. Option 01 uses the local bus on the VXI P2 connector to provide scanning, delay and exclude capabilities. The built-in-test features in the smart card include confidence checking which monitors the state of each relay. It monitors a spare set of contacts or sensing coil current to ensure the switching system configuration is as programmed.

Racal Option 01 Smart Card Datasheet (pdf)
Racal Option 01 Smart Card Manual (pdf)

Part Number: 401901, 401901-005 , 411901-005, 404820

This unit is sealed in the manufacture's box.

Part Numbers: CP290-01, 407377-100, 407377-910


***Purchase of this unit requires the trade-in of another CP290-01 Power Supply. Please contact Artisan Sales for further details. (A fee will be applied if a CP290-01 is not traded-in.)***

Part Numbers: CP290-01, 407377-100, 407377-910

***Purchase of this unit requires the trade-in of another CP290-01 Power Supply. Please contact Artisan Sales for further details. (A fee will be applied if a CP290-01 is not traded-in.)***

The Option 01T controls and receives all eight TTL trigger lines available on the VXIbus. It offers both message-based and register-based control in one module, combining ease-of-use with high-speed capability. The message-based interface accepts SCPI and IEEE-488.2 commands to communicate with all Racal Instruments VXIbus switch modules.

Racal Option 01T Switch Controller Card Datasheet (pdf)
Racal Option 01T Switch Controller Card Manual 1 (pdf)
Racal Option 01T Switch Controller Card Manual 2 (pdf)

Part Number: 405108, 405108-001, 407531-001, 415108
Product Family: 5998-01-543-1764, 5998015431764

Configuration:
• Cable Length: 8 m (26.2 ft.)
• Connector Protector and Cable Option: Standard Cable

• Agency Approval Option: None
Part Numbers: CP290, 407377, 200033-001, 200033-501

***Purchase of this unit requires the trade-in of another CP290 or CP290-01 Power Supply. Please contact Artisan Sales for further details. (A fee will be applied if a CP290 or CP290-01 is not traded-in.)***

This Ametek / Elgar 32V Mod. Master Power Module is used and in excellent condition. This unit is the 0 to +32 VDC, 6.25 A power module.

Part Number: 5699959-31
This is the standard 40-Pin Male to 20-Pin Female adapter.

40-Pin Male connector shown
here.
20-Pin Female connector shown here.

This product is used with:
• Agilent / HP 10085A
• Agilent / HP 10315H
• Agilent / HP E5324A-400
• Agilent / HP N1891A-K04

It is a low-cost termination accessory with 68 screw terminals for easy connection of field I/O signals to 68-pin DAQ products. The CB-68LPR has a right-angle mounted 68-pin connector.

Dimensions: 7.62 by 16.19 cm (3.00 by 6.36 in.)

Part Number: 184700B-01, 184700C-01, 184700D-01L


This unit is also known as the Energyline Systems Part Number: 500-003001-00.

Part Number: ADI-05, 006-000422-05
This Ametek / Elgar 40V Mod. Master Power Module is used and in excellent condition. This unit is the -40 to +40 VDC, 5 A power module.

Part Number: 5699959-41
This unit includes a terminal block.

Part Numbers: 183725C-01, 777459-06

This unit is sealed in the original manufacturer's box.

Configuration:
• 100-240 VAC Input

• 12 VDC Output
• 3A Output Current

Part Number: 780046-01

Possible lead time of 7-12 business days. Please contact our sales department for pricing and availability.

This Kit Includes:
• Front Chassis Mounting Bracket - Part Number 189932A-01
Configuration:
• Input Voltage: 100-120/220-240 VAC
• Output Power: 100 W
This ships as photos without any additional hardware.

Part Number: 778615-01, 189331A-01
Configuration:
• Type (01): Standard
• Approvals Option (00): None

Part Number: 89998-01, 87890-01
This is an accessory to the EADS / Racal 1261B 13-Slot High-Performance VXI Mainframe.
This unit must be purchased in conjunction with a compatible VXI module. We will install the daughterboard and test the VXI module prior to shipping.

Opt. 01: Provides a VXI word serial protocol servant interface to the SurePath family of VXI relay modules. The Option 01 is a circuit board assembly measuring approximately 3" x 9" that is installed as an optional daughter board on one of the SurePath C-size VXI switching modules. The daughter board accepts SCPI-compatible commands from its commander using VXI word serial protocol. The daughter board controls the relay module on which it is installed, and controls additional relay modules installed in adjacent slots to its right via the VXI P2 local bus. The daughter board is capable of controlling from one to 12 relay modules including members of the SurePath family of relay switching modules and VX4372 and VX4374 Scanner Slave modules.

Part Number: 671-3286-00, 679-3286-04, 679-3286-02, 671-3286, 679-3286-01, 679-3286-00, 671-3286-04, 671-3286-03

This unit ships sealed in the manufacturer's box.

Part Number 198854B-01L, 196157D-01L, 780493-01, 785185-01, 198854E-06L
Configuration:
• Full Scale Range Option(03): 0-10 mils peak-to-peak(pp)
• Transducer Input Option(01): 7200, 200 mV/mil

• Alarm Relay Option(01): Expoxy-sealed
• Agency Approval Option(00): Not Required
• Safety Barrier Option(00): None
• Trip Multiply Option(00): None

Part Number: 86827-01

This backplane is used in the E1401B, E1401T and E4210B mainframes.

Part Number: 315-00078R5, 3406-01-HPL
This Parker Compumotor EVM32 Baseboard is used and in excellent condition. The unit is an EVM baseboard extrusion with built-in DIN rail mount. SIM boards sold separately.

Part Number: PCA 71-018491-01

Configuration:
• Full Scale Range Option(02): 0-5 mils peak-to-peak(pp)
• Transducer Input Option(01): 7200, 200 mV/mil

• Alarm Relay Option(00): No Relays
• Agency Approval Option(00): Not required
• Safety Barrier Option(00): None
• Trip Multiply Option(00): None

Part Number: 86827-01, 135305-01

Configuration:
• 2M Sample Memory

• 50 Vpp Input

***Purchase of this unit requires the trade-in of another DBS902. Please contact Artisan Sales for further details. (A fee will be applied if a DBS902 is not traded-in.)***

This unit is also known as the VXI Technology E1415A / E1413C A3F Interface to Rack Mount Terminal Panel.

Part Number: E1400-66512
This unit is used with the TDS500, TDS600 and TDS700 Series Oscilloscopes.

Configuration:
• Diagonal Length: 197mm
• Width: 155 mm

• Length: 122 mm

Tektronix Part Number: 154-0968-26
Maxtek Part Number: 115-0968-00

View Photo of the back of this unit.


This TDK-Lambda LHOV-5 is the Elma 21-Slot VME Monolithic Chassis Overvoltage Protector.

LMOV / LHOV Overvoltage Protectors Manual (pdf)

This part is used with the following products:
• 44705A
• 44708A
• 44717A

• 44718A

Click here to see a picture of the Agilent / HP 44705-66501 Main Assembly Replacement Board for the 44705A

Configuration:
Input: 100-120V at 50/60/400Hz and 240V at 50/60Hz
Output: 600 W Max Total

Part Number: 0950-3276
This Parker / Compumotor SIM8-IN-EVM32 Digital Input SIM Card is used and in excellent condition. This unit provides eight digital inputs.

Part Number: 71-015686-03, 71-015686-13


Parker Compumotor SIM8-IN-EVM32 Manual (pdf)

This Parker / Compumotor SIM8-OUT-PNP Digital Output Sourcing SIM Card is used and in excellent condition. This unit provides eight digital outputs.

Part Number: 71-017810-01


Parker Compumotor SIM8-OUT-PNP Datasheet (pdf)

This unit does not include the display panel. The 3300 Six-Channel Temperature Monitor provides six independent channels of on-line temperature monitoring. Each monitor is suitable for virtually all types of temperature measurements.

Configuration:
• Transducers: RTD

Part Number: 81228-01, 79492-01

We have a variety of different pods labeled Pod 1 through Pod 7. The functionality of all pods is exactly the same. (IC test clips are not included)

The E5383A flying lead set is the tool to use when probing points are dispersed on your target or a probing point was not designed in. This probe can be connected to designed-in connectors or used with IC test clips to attach to components and other board features. This probe can be used with any Agilent logic analyzer with a 40-pin cable connector.

Part Number: 01650-61605, 01650-61608

Includes:
• 01650-94312, Label (Pod and Cable)
• E5346-94304, Label (Probe and Cable)

• E5346-61601, Mini Cable

Part Number: E5346-60001

Agilent E5346A Datasheet (pdf)
Agilent E5346A Manual (pdf)

Terminal Block not included.

Part Number 198854B-01L, 785185-01
This Tekronix 679-4119-00 is the TDS3032B Digital Phosphor Oscilloscope Front Panel.

Part Number: 679-4119-XX, G-2317-XC, 3777S-TEK-010
*This item is an accessory and not sold separately. It must be combined with the purchase of an Agilent / HP 165xxx Card or mainframe.*

It can be used to cover both the module connector and I/O connector for an unused slot. This cover protects against dust and damage and provides a clean finished look for Backplanes that are not full.

National Instruments cFP Blank Slot Cover Manual(pdf)

Part Number: 778625-01, 189255

This connection is used with Agilent 16715A, 16716A, 16716A, 16718A, 16719A, 16740A, 16741A, 16742A, 16750B, 16751B, 16572B and 16760A models.
Terminal Block not included.

Part Number 198854B-01L, 785185-01
This unit ships in the sealed manufacturer's bag.

Part Number: 196740-01, 785502-01
This Ogura Clutch OPR-109F Rectifier is used and in excellent condition.

Configuration:
• Full Scale Range Option(02): 0-5 mils peak-to-peak(pp)
• Transducer Input Option(01): 7200, 200 mV/mil

• Alarm Relay Option(02): Hermetically-sealed
• Agency Approval Option(03)
• Safety Barrier Option(00): None
• Trip Multiply Option(00): None

Part Number: 86827-01

This Omron Single Track Magnetic Head is new from surplus stock.

Part Number: 6920895-3

Configurations:
• Head Assembly: R/W
This Data Sciences International / LDS / Gould 13-6615-65 ECG / Biotach Module is used and in excellent condition.

Part Number: 13-6615-65
Socket Module 84-537-21 Configuration:
• Dim "A": 1.195 to 1.197 in (30.35 to 30.40 mm)

• Dim "B": 1.195 to 1.197 in (30.35 to 30.40 mm)
• Series: 537


This is now sold by Agilent as part number 5090-4833.

*This item is an accessory and not sold separately. It must be combined with the purchase of an Agilent / HP 165xxx Card or mainframe.*


This Associated Research Ground Bond Return Lead is new from surplus stock. It allows ground bond test current to return to the ground bond tester. The test lead is terminated in an alligator clip.

Cable Length: 15 ft

Part Number: CBLHR-15

Compatible Models: 3130, 3160, 5030DT, 7504SA, 8004, 8005, 8006

11A34 Configuration:
• Four Channels
• DC to 350 MHz Bandwidth
• 1 mV/Div to 10V/Div Calibrated Deflection

• Switchable 50Ω or 1 MΩ Input Impedance
• High Resolution Calibrated DC Offset

Tektronix 11A34 Datasheet (pdf)
Tektronix 11A34 Manual (pdf)

The 3300 ac Power Supply delivers reliable, regulated power for up to 12 monitors and their associated transducers. A second Power Supply in the same rack is never required. The Power Supply is installed in the left-most location (position 1) in a 3300 rack, and converts 115 Vac or 220 Vac into dc voltages used by the monitors installed in the rack. The Power Supply is equipped with a line noise filter as standard.

Configuration:
• Input Voltage Option (01): 95-125 VAC
• Power Input Module Option (20): Standard
• Agency Approval Option (01): CSA/NRTL/C

Part Number: 88219-01

*This item is not sold without the purchase of a Gnubi mainframe or module.
This Agilent / HP E5515-60166 LSS Analog Board is used and in excellent condition. This is a replacement LSS Analog board for the E5515 Wireless Communications Test Set.
This Agilent / HP E5515-60174 TDMA Baseband Generator Board is used and in excellent condition.
This Agilent / HP E5515-60221 Board is used and in excellent condition. This is a replacement board for the E5515 Wireless Communications Test Set.
This Agilent / HP E5515-60513 ADC Board is used and in excellent condition. This is a replacement Analog to Digital Converter board for the E5515 Wireless Communications Test Set.
This Agilent / HP E5515-61168 Synth Doubler is used and in excellent condition.

Part Number: E5515-61168


View Photo of the back of this product

This Agilent / HP E5515-61182 Reference Module is used and in excellent condition.

Part Number: E5515-61182


View Photo of the back of this product

This Agilent / HP E5515-61199 Vector Board is used and in excellent condition.

Part Number: E5515-61199


View Photo of the back of this product

This Data Sciences International / LDS / Gould Transducer Signal Conditioner Module is used and in excellent condition.

Part Number: 13-6615-50
This GE / Bently Nevada CP95 Connector Protector Kit is new from surplus stock.

Inlcudes:

• Connector Protectors (Pack of 10 Pairs) , Part Number: 40180-02
• (2) Application Tools, Female and Male

This unit is the -7 to +7 VDC, 15 A power module.

Part Numbers: 5699959-01, 6966696
This Tektronix VX1411A Rackmount Slide Kit is new from surplus stock. It ships in the original Tektronix Box.
This Interface Technology DT9110 Daughter Card is used and in excellent condition.
Product Family: 5998-01-458-5039, 5998014585039
This Associated Research High Current Return Interconnect Cable is new from surplus stock.

Cable Length: 3 ft
This unit has defects in the LCD screen; however, this will not prevent it from functioning properly.
This Konica Minolta CA-A15 Analyzer Card-G is used and in excellent condition.

Configuration:
• Type: EEPROM 8KByte
• Model: CSC-008K-A, BR 8A1-A
This unit is sealed in the manufacturer's bag.

This cable has microtech connectors.

Part Number: 0922, 14039-01
Length: 1 m
This is also known as the cRIO-9421.

Part Number: 779002-01, 189197C-01, 189197F-01L, 157739A-01L
This unit is also known as Precision Interconnect Part Number 600-0153-01.

Part Numbers: E5403A, E5405-68702
It can be used to cover both the module connector and I/O connector for an unused slot. This cover protects against dust and damage and provides a clean finished look for Backplanes that are not full.

National Instruments cFP Blank Slot Cover Manual(pdf)

Part Number: 778625-01, 189255

Showing 1-100 of 5303 Results
Contact Us
Fax:

(240) 376-1381