This Agilent / HP 81003LA - LC Connector Adapter is used and in excellent condition. Threaded adapter for 8152x Optical Heads, 8162x Optical Heads with 81624DD and High Power Optical Heads
This Agilent / HP 81003LA - LC Connector Adapter is new from surplus stock. This unit comes in the original packaging. Threaded adapter for 8152x Optical Heads, 8162x Optical Heads with 81624DD and High Power Optical Heads
This JDSU / Acterna / W&G 2060/00.51A FC-PC, FC-APC Test Adapter is new from surplus stock. Also known as BN 2060/00.31 or BN 2060/00.51 or BN 2060/00.51A.
This JDSU / Acterna / W&G 2060/00.31 FC-PC, FC-APC Test Adapter is used and in excellent condition. Also known as BN 2060/00.31 or BN 2060/00.51 or BN 2060/00.51A.
This Agilent 81002FF Integrating Sphere is used and in excellent condition. The Agilent 81002FF Integrating Sphere has an outside diameter of 80mm and is lined with a highly diffusive material. The basic idea of an integrating sphere is that light enters the sphere and is diffused to uniform power density over the interior surface. A small portion of the total power exits the sphere through a small aperture to the detector in the optical head. The sphere is used for several applications:
High power - the sphere creates an attenuation of approximately 41 dB and has a maximum power specification of + 40 dBm (10 W), providing the highest power handling capability available. The size of the sphere allows this high power to be diffused and dissipated very easily.
This ILX Lightwave BF-820 Bare Fiber Holder is sold as-is/parts without warranty and has been priced accordingly. This unit does not include the rubber grips for easy opening. Unit needs to be opened with other methods.
This unit ships in the original manufacturer's bag. This connector is not recommended for 8153xA/B Sensor Modules, due to not being able to access the ejector handle.
This Agilent 81000BA Barefiber Adapter 125µm is new from surplus stock. It ships in the original Agilent/HP packaging and include both Barefiber Adapter and the Barefiber Ring Adapter attached.
This Agilent 81010BL Multimode Fiber Lens is used and in excellent condition.
• For 9um and 10um core with 125um cladding • Wavelength range: 900nm to 1700nm • Effective focal length = 2.9mm (0.11") • NA max = 0.19, for single-mode fibers with NA <=0.13
This Agilent 81000BA Barefiber Ring Adapter is used and in excellent condition. This unit is the standard optical head adapter. It does not include the 125 um fiber holder and has been priced accordingly.
This Yokogawa / Ando AQ9431 FC Optical Interface Connector Adapter is used and in excellent condition. This is a screw mount adapter. *This item is an accessory and not sold separately. It must be combined with the purchase of a compatible piece of Ando optical equipment.*
This Anritsu J1411A / J0618F SC Quick Release Optical Connector - Option 40 is used and in excellent condition. This item is also known as Agilent P/N 1005-1000 and JDSU / Acterna BN 2150/00.58.
*This item is an accessory and not sold separately. It must be combined with the purchase of a compatible piece of Anritsu / Agilent optical equipment.*
This connector does not include the built-in protective cap. *This item is an accessory and not sold separately. It must be combined with the purchase of a compatible piece of Exfo / Burleigh optical equipment.*
This Agilent 81000BA Barefiber Adapter 125µm is used, and in excellent condition. This unit does not come with the standard optical head adapter (round piece), it is incomplete and ships as pictured.
This Agilent / HP 81000FB Bare Fiber to FC/PC Adapter is new from surplus stock. This unit includes standard accessories and documentation. Click here for a close up of accessories.
The 81000FB Bear Fiber to FC/PC Adapter is incompatible with laser sources and is designed for adapting bare fibers to sensor modules only. It is for use with the 81000FI FC-PC connector interface. The 81000FB is recommended for use with the 81633A, 81634A, and any of the older 815xxx sensor modules. These specific modules have a slightly recessed input, and are non-contact. The 81000FB may also be used with Agilent optical heads in combination with either an 81000FA or an 81003FD FC-PC adapter. To adapt a bare fiber directly to an optical head, use model 81000BA for fiber with a cladding diameter of 125 microns.
This Agilent / HP 81000FB Bare Fiber to FC/PC Adapter is new from surplus stock. This unit does not include the case and ships as pictured. The 81000FB Bear Fiber to FC/PC Adapter is incompatible with laser sources and is designed for adapting bare fibers to sensor modules only. It is for use with the 81000FI FC-PC connector interface. The 81000FB is recommended for use with the 81633A, 81634A, and any of the older 815xxx sensor modules. These specific modules have a slightly recessed input, and are non-contact. The 81000FB may also be used with Agilent optical heads in combination with either an 81000FA or an 81003FD FC-PC adapter. To adapt a bare fiber directly to an optical head, use model 81000BA for fiber with a cladding diameter of 125 microns.
This connector does not include the built-in protective cap. *This item is an accessory and not sold separately. It must be combined with the purchase of a compatible piece of Exfo / Burleigh optical equipment.*
This 3M 8300 Hot Melt Fiber Optic Connector is new from surplus stock. This unit ships in sets of ten. It ships in the original unopened manufacturer's packaging.
This Agilent 81050BL Multimode Fiber Lens is in the in the original, unopened packaging.
• For 50um/ 62.5um core and 125um cladding • Wavelength range from 900nm to 1700nm • Effective focal length = 6.2mm (0.24") • NA max = 0.37, for multimode fibers with NA <=0.13
This connector does not include the built-in protective cap. *This item is an accessory and not sold separately. It must be combined with the purchase of a compatible piece of Exfo / Burleigh optical equipment.*