Lumetrics DI-340 OptiGauge Precision Thickness Measurement System
• DI-340 Controller and Computer
• LG E2242TA Monitor
• Lumetrics 50mm Probe
• Lumetrics Verification Probe w/ F1VS200F2.5 Fiber Optic Microscope and Accessories
• Probe Stand and Accessories
• National Instruments SH68-68-EPM Cable, 2 Meters
• Power Cables for Computer, Controller, and Monitor
TMS 63E-563 Micro-g Vibration Lab Table:
• BreadBoard: 36" x 48" (LxW) CleanTop II
• CleanTop II Thickness: 4"
• Screw Type: 1/4-20, 1" Spacing
• Stabilizers: Gimbal Piston Air Isolators
Configuration:
• Operating System: Windows XP Professional, Ver. 5.01.2600
• Processor: (4) Intel Core i5-2400, 3.10 GHz
• Physical Memory: 3.17 GB RAM
Lumetrics Software and Version:
• OptiGauge Control Center: 6.2.0
National Instruments Software and Versions:
• CVI Run-Time: 8.1.1.361
• NI-DAQmx: 8.7.1f3
• IVI Compliance Package: 3.1
• LabVIEW Run-Time: 7.1
• Measurement & Automation Explorer: 4.4.1.49152
• NI-USI: 1.0.2
• NI-PAL Software: 2.2.0
• NI LabVIEW SignalExpress: 2.5.1
• NI-VISA: 4.2
• NI-VISA Runtime: 4.2
• LabVIEW Run-Time: 8.0.1
• LabVIEW Run-Time: 8.2.1
• LabVIEW Run-Time: 8.5.0
Part Number: 10000-00
View Photo of 50mm probe.
View Photo of verification probe w/ accessories.
View Photo of probe stand and accessories.
Our technicians fully tested this unit. Here are some software screen captures as well as some data scans/tests that were run: Screen Captures (pdf).
- Non-Contact Thickness Measurement
- 12 Microns to 8 Millimeters Measurement Range
- Self-Calibrating Electronics
- (...)
- Real-Time, Fast 50 Hz Scan Rate
- Multiplex up to Eight Probes
Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.
Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.
InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.
It's like having the store come to you!
To get started...
1. Fill in the request form below
2. We'll send you an email letting you know exactly when your piece of equipment will be available for viewing
Item to Inspect: 92309-1 - Lumetrics DI-340 OptiGauge Precision Thickness Measurement System
