Parker / Compumotor 71-011370-04 SX-Drive Amp Board
- Torques from 65 to 1,900 oz-in
- Speeds to 50 rps (3,000 rpm) Continuous
- 16 User Selectable Motor Resolutions to 50,800 Steps/re
- Three-State Current Control for Reduced Motor Heating
- User-Selectable Current Waveform for Smooth Operation
- Zero Phase Input Resets Phase Currents to the Power Up Positions
- Fault Output for Remote Signaling and Diagnostics
- Optically Isolated Step and Direction, Shutdown and Zero Phase Inputs
- Anti-Resonance Eliminates Mid-Range Instability
Common features of these drives and drive/indexer systems include the following:
• Torques from 65 to 1,900 oz-in
• Speeds to 50 rps (3,000 rpm) continuous
• 16 user selectable motor resolutions to 50,800 steps/rev
• Three-state current control for reduced motor heating
• User-selectable current waveform for smooth operation
• Zero phase input resets phase currents to the power up positions
• Fault output for remote signalling and diagnostics
• Optically isolated step and direction, shutdown and zero phase inputs
• Anti-resonance eliminates mid-range instability
• Fully short circuit protected—phase-to-phase and phase-to-ground with no time limit
• Enclosed to prevent contaminants from entering the drive enclosure
• Power dump circuitry protects the drive from large inertial loads
• RP240 remote panel interface
• Nine motors with 10 foot motor cables. Available in 23, 34 and 42 frame sizes
• Drive status indicators; power, step input, under-voltage, over-voltage and motor fault
In addition to these common features, the SX Series has the following:
• Extended edition of X programming language
• Motion calculation delay times as low as 500 microseconds
• Conditional branching commands
• Separate acceleration and deceleration commands
• 50 user defined variables
• Registration input
The SXF Series includes the common features, all the SX features, and the following:
• Encoder following controls speed and position of a slave axis based on speed and position of master axis encoder
• Synchronizes speed and position based on registration marks
• Change ratios “on the fly,” complex motion profiling
Parker / Compumotor 71-011370-04 SX-Drive Amp Board Manuals, Datasheets, Drivers, Links
Parker / Compumotor 71-011370-04 SX-Drive Amp Board Specs
| General | |
| Manufacturers | Parker / Compumotor |
| Model | 71-011370-04 |
| Condition | Used and in Excellent Condition |
| Product Family | S-Drive, SDrive, S6-Drive, S6Drive, SX-Drive, SXDrive, SX6-Drive, SX6Drive, S8-Drive, S8Drive, SX8-Drive, SX8Drive, SXF6Drive, SXF6-Drive, SXF8Drive, SXF8-Drive, S3Drive, S3-Drive |
Buying used equipment doesn't always have to be a shot in the dark. We know there are plenty of differences when it comes to used equipment and quite often, choosing between different pieces is difficult, especially when the equipment is not sitting right in front of you.
Well, what if you were able to see a piece of equipment before you purchased it? Not just a picture from the manufacturer's website, but the actual piece of equipment you would receive.
With InstraView™, we move you one step closer to inspecting the equipment you're interested in without having to wait for the equipment to show up at your door.
InstraView™ works in your web browser and allows you to view the actual piece of equipment you're interested in before purchasing. You can zoom in close to see the labels with the serial number or zoom out to see the overall condition of the equipment.
It's like having the store come to you!
To get started...
1. Fill in the request form below
2. We'll send you an email letting you know exactly when your piece of equipment will be available for viewing
Item to Inspect: 58510-30 - Parker / Compumotor 71-011370-04 SX-Drive Amp Board
Expedited, Freight, and International shipping available.
We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our 90-Day Repair/Replace/Refund Warranty.
Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.
I find the employees helpful and knowledgeable about their products.
Great company with great people. Always a pleasure to do business with Artisan!
We have some test equipment in our lab from the 1990's that stopped working about 2 years ago. It sat in the corner collecting dust, but we took on a project last month that required more machines. After talking to Artisan, we found out we could get parts to fix our machine for much less than buying a new one!
The customer service representative was great. She couldn’t answer my question but connected me to an engineer who made sure I was ordering the right part. Shipping was fast too.