XH2B2 and MXIK309F3X83 Caloritech Explosion-Proof Housing and Pipe-Insert Immersion Heater

The Caloritech XH Series Explosion-Proof Housings feature the unique x-Max "Track and Trolley" system. Five standard diameters, offered in lengths up to 48" (1220 mm), can cover most of your explosion-proof housing requirements. No longer is it necessary to remove dozens of bolts to gain access to housing components for installation, adjustment or servicing. With longer Type XH housings, components are mounted to the trolley. To service, simply unscrew the end cover and slide the trolley out of the housing. Caloritech's "Track and Trolley" wiring system allows the user to mount all electrical components to an aluminum "Trolley", make all wiring connections outside of the enclosure, and simply slide the "Trolley" along the extruded "Track". The x-Max terminal housing features copper-free (less than 0.4 of 1% by weight) aluminum construction throughout. Four conduit openings are provided on standard models, allowing the single Model XH to act not only as a standard X-, T-, C-, or B - style junction box, but as virtually any combination of standard styles. The standard x-Max housing is available in five cross sectional sizes with approximate inside diameters from 2 3/4" to 5" (70 mm to 127 mm). The x-Max system is offered in a variety of lengths from 2 1/2" to 48" (64 mm to 1220 mm). Various x-Max products are available that make combining multiple housings an extremely simple process.

The Caloritech MX Series Pipe-Insert Immersion Heaters are used for heating asphalt, molasses, tar, paint, glue or any viscous fluids. When heating corrosive liquids the pipe enclosing the heater must be resistant to corrosion. Tank fabricator to supply and install pipes. Heater can be removed without draining the liquid. Heat is transferred safely from the heating element to the inner wall of the pipe by a combination of convection and radiation. Note that filling the pipe with a heat transfer fluid is neither required nor recommended.